If that's a shot at the turbo, nah he maybe fine as long as it's fed clean oil and a free flowing drain. I have ran 3 of that brand and only 1 failed due to my catch can freezing over causing high crankcase pressures. China turbos aren't half bad anymore.
@@dashzergames7967D16z6 or d16y8 can handle up to like 10lbs with stock internals. they fail because of the rods, they're like pencils. I believe you can run like 20-30psi with built internals on a stock block.
@@dashzergames7967He’ll need to rebuild if he wants to run upwards of 10 LBS of boost reliably otherwise he can run stock internals and 10 LBS for eternity with no issues
You’re gonna boost the D series?! Can’t wait to see it! Found your channel a while back when you were building the 10th gen si. Inspired me to buy one, and have been watching you since 👌🏾❤️
@@applepoop10 D series makes plenty of sense. They cost pennies to build compared to k series, parts are more available than b series, and they're nearly as bulletproof as B and K.
@@applepoop10 d series is fine. Youll make 220, 240whp on vtec, fuel with a turbo. Obviously its recommended to just build the d series cause thats what its for, cheap power. 450 to 500hp on a built piston and rod d series. I had one that did 411 on 93 in my del sol
I have heard their quality has improved overall , but ive seen countless posts of their coil overs blowing out , arriving leaking or performing worse than stock suspension
Always waiting for your next upload. Eversince I saw your every for sale civic ever short, you got me hooked! Anyways, can't wait to see the update on this new project car.
Bro im doing up a singlecam vteck right now its on nitrous but 75shot dry d16zc 1.6 its my daily i have another racecar k24a2 ek hatch on itbs too but and i wnanna throw little turbo kit and do shot on top and change trans to d to be kit that means could slap on b series trans with the plate but happy to see.another singlcam out ripping sbit 🏁💪🔰🚘👌👀😎🎉
Been doin d16z6series full internal build up..eagle rods wiseco pistons..garret gt25..only for fun 290hp..last until now (8 years)..the problem is about the clutch..had been changes 3 times..
I had maxspeedingrods turbo on my old Audi and the compressor wheel blew to pieces in 2 months with no tune. If you want a cheap turbo I’d suggest rev9 I tan their turbo and coil overs for years with no problems
My uncle has used one for 2 years before going precision turbo, it still works too 🤦🏽♂️ a lot of people don’t understand how budget turbos need proper oil and to be broken in before going full send
Maxpeeding forged piston rods are also great for thiet value if you haven't tried some yet, waiting to see how this d series build would turn out, it's really an underrated engine
Had a friend learn the hard way that turboing a d series is a waste of time. You'll be doing so much work and pushing that block to its max just to keep up with b and k swaps.
Guys you know every time y’all put that link on the bio he gets payed. He’s offered a 35% off and gives y’all only 10. Y’all really like this guy more then your own selves. 10% ain’t shit. Just pay the hard working business ppl they deserve it more. Cheers happy holidays lads
Turbo is about to last about 4 pulls at 15 pounds of boost
If that's a shot at the turbo, nah he maybe fine as long as it's fed clean oil and a free flowing drain.
I have ran 3 of that brand and only 1 failed due to my catch can freezing over causing high crankcase pressures. China turbos aren't half bad anymore.
block aint built for boost, but he literally just said he would rebuild
@@dashzergames7967D16z6 or d16y8 can handle up to like 10lbs with stock internals. they fail because of the rods, they're like pencils. I believe you can run like 20-30psi with built internals on a stock block.
@@dashzergames7967He’ll need to rebuild if he wants to run upwards of 10 LBS of boost reliably otherwise he can run stock internals and 10 LBS for eternity with no issues
The turbos outlast a stock block, and these turbos have gone up to 500 hp after that it's a gamble
My cousin and I have been using both our eBay turbo ($250) for over a year and it’s still performing great.
Your poor engine💀
I feel sorry for the $70k ZL1 and the $60k Mk5 I gapped lol
Do you hav the link for the turbo 😅
Yo what turbo
@@efdeepro6427 performance billet wheel Turbo charger water&oil T04Z T66 T4 A/R 1.00 A/R .70
Those turbos aren't bad. I've done 20 psi just fine
Not on a single cam. 😅😅
@@alfredmarino2413 tell that to supercharged single cam owners
You’re gonna boost the D series?! Can’t wait to see it! Found your channel a while back when you were building the 10th gen si. Inspired me to buy one, and have been watching you since 👌🏾❤️
Civic gait
Honda civic lovrs
Your si and his turbo d series throwing a rod hopefully to get you off the road
Everyone talking about how little of power it's gonna make, when this platform is probably the cheapest to turbo and cheapest in general for some fun
Fuck yeah bro, nothing wrong with funny money. He gonna have fun and as long as he's happy, shit I'm happy.
Cheapest to turbo would be a vehicle that's already set up for it, aka fiesta st
@@picklepee2771isn’t that a 3 cly ??
@@user-rr4hr7bz7n you must be European. Fiesta st has the 1.6 ecoboost 4 cylinder
@@picklepee2771 no I’m not, I just assumed it was a 3 cly given it’s engine size that’s all
I assumed wrong 😂
Don’t start your video saying. “ I got a little package “ 😂
U bout to make 150whp wit that single cam
Turboing single cams doesn’t make any sense when you have better options available. Just go K-Series bro, or a B18C1 at minimal.
@@applepoop10 exactly I have 1999 supercharged civic si and a 2010 4door si wit a sheepey turbo kit
if you throw in pistons and rods in a D series the block can withstand 500bhp so i imagine he'll be making close to double 150whp.
@@applepoop10 D series makes plenty of sense. They cost pennies to build compared to k series, parts are more available than b series, and they're nearly as bulletproof as B and K.
@@applepoop10 d series is fine. Youll make 220, 240whp on vtec, fuel with a turbo. Obviously its recommended to just build the d series cause thats what its for, cheap power. 450 to 500hp on a built piston and rod d series. I had one that did 411 on 93 in my del sol
This shiii got VTEC my boi
Doooooooope , ima be right behind you , so close to buying my civic 😢❤
big moves my g. slappin one of those on a k24a4 right now also lmao
you now officialy have a turbo civic good luck smoking those hellcats
Had a max turbo and it was actually pretty good
I have heard their quality has improved overall , but ive seen countless posts of their coil overs blowing out , arriving leaking or performing worse than stock suspension
My boi is running that same exact turbo from MSR on a 1.8t jetta shits fast ashhh
congrats bro, finally the turbo!
That's a pretty crazy looking alternator man, I dig it!
đù má con honda 5 ngàn của thầy đỉnh quá 🤩🤩🤩🤩
Heard one guy on Street Alpha talking about 30lbs and a 50 shot. Are these D series single cams really that indestructible?!?
I love to when you deck out old Honda civics 🔥
Dude is so quick at installing turbos I didn’t even have to blink
Always waiting for your next upload. Eversince I saw your every for sale civic ever short, you got me hooked! Anyways, can't wait to see the update on this new project car.
Same here brother! Never thought a Chinese man could be so entertaining! Keep it up
@@Logicalization...why not?
@@prestonbelgarde6896 They are usually just serious and good at school
At least that turbos goin on a Honda you know that max speedingrods turbo is blowin up
This build gonna be fun to watch 💯
DUU MAAA
Spooly boi!!
Duuuuu maaaa
The maxpeedingrodsrods turbos are not as bad as the coilovers
Bro im doing up a singlecam vteck right now its on nitrous but 75shot dry d16zc 1.6 its my daily i have another racecar k24a2 ek hatch on itbs too but and i wnanna throw little turbo kit and do shot on top and change trans to d to be kit that means could slap on b series trans with the plate but happy to see.another singlcam out ripping sbit 🏁💪🔰🚘👌👀😎🎉
Been doin d16z6series full internal build up..eagle rods wiseco pistons..garret gt25..only for fun 290hp..last until now (8 years)..the problem is about the clutch..had been changes 3 times..
Civic gets big turbo. Proceeds to bust out the cutest lil tiny turbo. Lol my 72mm in my em2 must be a giant turbo
I had maxspeedingrods turbo on my old Audi and the compressor wheel blew to pieces in 2 months with no tune. If you want a cheap turbo I’d suggest rev9 I tan their turbo and coil overs for years with no problems
lol the way you came in 😂
My uncle has used one for 2 years before going precision turbo, it still works too 🤦🏽♂️ a lot of people don’t understand how budget turbos need proper oil and to be broken in before going full send
Maxpeeding forged piston rods are also great for thiet value if you haven't tried some yet, waiting to see how this d series build would turn out, it's really an underrated engine
Love D series lots of memories ❤
im pretty sure its a k series
@@FugaNotOfficialno way your kidding right
@@Solid_Steak idk
D series internals are still pretty cheap and you can turbo them to 250hp if you get a good tune
🔥🔥🔥
Go modest boost if you want it to last more than 6pulls.
Paint that bay man 😭 nice car
Been a year and the turbo is still sitting in the corner.
Hope it runs good ill be watching
Tried 2 of their turbos, they were amazing at 8psi lasted a yr. Went 10psi and they both blew up within days smfh
Got the same turbo for my 03 accord euro CL9
That turbo looks huge for a single slammer
I love this guys energy
*Mopar boys: so how to you drain oil? Whats a clutch pedal?*
Who remember that "Khay-series" expressions 😂😂😂
Anh ơi cho em hỏi con civic 1999 này dẫn động bằng cầu trước hay cầu sau vậy ??
Hell yeah nice car
Im looking to get a civic to tune up :)! What year should i go for?
sooo badass, i love the motor
Ayyy little single jingle snail you should definitely build it and try to push around 14 PSI
I love how tiny car turbos are compared to diesels 😂
Wish I saw this 2 months ago when I bought rods for my Mazda speed 3
DUUUU MAAAAA 😳😳😳😳
Wait till that vtec kick in😂😂😂 noneed for turbo😂😂
Civic: can I get a turbo pls🥺🥺
You: Ok!😊
are blowing up the old engine before putting the new k in?
I love that brand i literally got my subaru a set of super nice looking coilovers for dirt cheep i was shocked by the quality for the price
Running their k03 in my audi with no complaints
That turbo is fucking huge for that motor boost lag gonna be crazy
80 pounds of boost let's goooo!!😂
ayeee make sure its gotta turbo guard
Do the valve cover white with chrome letters
Had a friend learn the hard way that turboing a d series is a waste of time. You'll be doing so much work and pushing that block to its max just to keep up with b and k swaps.
I’m at work and just opened this the intro 😂
I actually used that company for my turbo and to my surprise its actually lasting
SPOOLY BOI!!!!!!!!
"little turbo" 😉
I'd love to see a d-series build I was actually going to go with a d-series turbo build until I wanted to actually swap to a b20.
Got the pixel car racer turbo up in here
D Series with a Boosty Boii is 👑
A D build! Very respectable. Those little monsters can put up the numbers once they are built. Pretty much like every Honda engine since 89 haha
Yes, it looked like you just threw the turbo over your shoulder
We love turbo❤
How much did this whole build cost you . This is like my dream civic build .
1$
love your civic
Can anyone tell me what the holes around the inlet of the turbo are for?
SPOOLI BOI
That thing is gonna need a laptop pretty soon 😂
Bro i love ur car sm i wish it was mine
Finally! I can’t wait 😆
Thoughts on 11th si
Guys you know every time y’all put that link on the bio he gets payed. He’s offered a 35% off and gives y’all only 10. Y’all really like this guy more then your own selves. 10% ain’t shit. Just pay the hard working business ppl they deserve it more. Cheers happy holidays lads
Stutututututu ❤ duuuu maaaahhhhhh
I'm thinking of getting a similar skunk2 intake manifold is it worth it?
Man your gunna help me kswap my 06civic!!! 😂
upgrade anything that gets oil to your rods and pistons, trust me you gonna need it
Get dual turbo your sh finna be fast asf
How much psi does it give
Best thing you can do for the d series
i like how he always say DUUUUUUUUU MAAAAAAAAAAAAAAA
Do you know what it means?
How much did you buy the civic for?
Just a bunch of haters fr👎🏽
Does this energy stay with you all day?
Nice build man!!!!!! Hondas are always the best in my opinion :)
Did you fix the check engine light
Hope their turbos are better then their struts their struts rust and make a lot of noise but do you expect for a couple hundred dollars
cant wait for the update
Jus the perfect Honda content I need to end the night🌚….
Duuuuu
Maaa🤌🏼
I wonder how long there turbos last so this gonna be fun to watch
The one on my eclipse and my boosted ka still going after 3 years so not bad imo both making 320ish hp
“ Mr peeding rods”