DJI FPV Goggles V2 FCC & 1200mw Hack - Complete How-To For V1,V2, Caddx Vista & DJI Air Unit.
Vložit
- čas přidán 3. 06. 2024
- DJI FPV FCC Hack and 1200mw Hack for DJI FPV Goggles V2, V1, the DJI Air unit and the Caddx Vista. This is an updated complete overview and how-to of performing the FCC and 1200mw hacks on the current DJI FPV system. Note this is not for DJI FPV Drone.
Order Secretlab Titan or Omega Gaming Chair bit.ly/2WTEO3F
DJI FPV System - click.dji.com/ACa1EvEdX65IbMN...
FCC Hack File Air Unit - drive.google.com/drive/folder...
1200mw Hack For FPV Goggles V1 and V2 - drive.google.com/drive/folder...
Order the Cube Autopilot and Accessories at - www.3dxr.co.uk
Support us on Patreon and join my discord server - / madrc
Chapters
00:00 Start
02:45 FCC Hack For DJI Air Unit & Vista
04:26 FCC Hack File naco file
06:51 Caddx Vista FCC Hack
07:24 Vista naco file
09:22 FCC Hack Questions
10:26 1200mw Goggles M0D
11:22 1200mw naco_pwr
13:08 1200mw Goggles Update
13:47 DJI FPV Remote Info For Hacks
14:32 50Mbps Mode Info
15:17 Wrap-up
=============================
Mads Weekly Live Stream
=============================
I live stream weekly please join me
=============================
Patreon Supporters Discord Server
=============================
Patreon supporters of my channel get exclusive access to my Discord Server, there I post info, behind the scenes content as well as help and support on the things i discuss on the channel, for more info check out
/ madrc
=============================
Support The Channel
=============================
I would also ask if you find my content helpful please consider supporting the channel via membership on Patreon or there are links here that we may receive a little commission on.
You can also support me via paypal donation to buy me a coffee or donate to help purchase more products and equipment to talk about.
Support Us On Patreon & Join My Discord Server - / madrc
Paypal Donate - mad_rc@icloud.com
Order Secretlab Titan or Omega Gaming Chair - bit.ly/2WTEO3F
Order DJI Digital FPV System - click.dji.com/ALwcdoCMalut8lJ...
============================
Channel Supporters & Sponsors
============================
The following companies are supporters of the channel and we would not be able to make content without them.
www.3dxr.co.uk - The Cube & Drone Related Products
www.telonic.co.uk - Electronics Test Equipment
cubepilot.org - Cubepilot Autopilot & Accessories
=============================
Review & Business Enquiries:
=============================
Review Enquiries - If you would like to work with us on product or service you have please email mad_rc@icloud.com
Business Enquiries & Consulting - We have huge amount of experience in emerging technology and unmanned systems, we offer both in-house technical services and consultancy, if you would like to discuss how I can help you please email awuas@icloud.com
=============================
Follow Me On Social Media
=============================
Twitter: @madrc1
Instagram: ian_mads_tech
Facebook: / themadrc1
=============================
Music Used
=============================
All music licence by Bensounds
www.bensound.com/royalty-free-...
#DJI
#FPV
#Drones - Věda a technologie
For what it's worth, there is a day-1 firmware update for the V2 goggles that is waiting for the new DJI drone to release. Pre-testers are already using these firmwares, but any information about them is currently under NDA. The good news is, I can confirm that I was able to flash back to 0604 from my pre-release (post-0604) firmware. So if any important features are removed, it may be possible to restore them if you are willing to stay on older firmware. In fact, I kind of screwed myself over as there is currently no public way to flash from 0604 forward to the pre-release firmwares, so my v2 goggles were no longer usable with the un-released drone. Oops.
Hay man, nice to see you here, I am honoured.
Been there before with prerelease firmware and DJI, care is always needed as a brick is only a click away sometimes lol. I'm not involved in beta testing or helping to admin the Official facebook groups now as I stepped away so won’t be involved in this release now or able to test these things my self until I’m actually able to buy it my self, god knowns when that will be in the UK sadly.
It’s certainly not beyond the realms of possibility DJI would change something that affects FPV users intentionally or not so that's why I put the warning in. been there too many times in the passed with other products as DJI does not do a lot of looking backward and as I suspect we both know this is priority right now. I’m not saying the standalone FPV is obsolete or not being developed but for FPV users sitting where you are right now is a safe bet.
The fact there is downgrade is good and thanks for confirming that.
I’m really looking forward to your thoughts when this thing lands as I know you will give a good honest view from your perspective.
I hope you and yours is staying safe in this madness we all find our selves in.
Ian.
Hey Joshua! awesome video. So I was trying to select the files for the FCC hack but it says I need to request for it on google. Would you possibly grant me access. Also I have a Mac. Thank you!
does 1.00.0606 still work with 1000 and 1200 mw for the v2's?
Hey Joshua Bardwell! I've been trying to figure out how to get in touch with you for a few days now, ( didn't want to just do a comment) but here I am. This hack for the 1200mw will this work on the dji fpv drone? I live in the US. And this is my first fpv drone. Ive noticed I don't get the best signal around things. But doing this with the goggles will it work for the drone?
@@acarp4766 mine doesnt
For others who are wondering like me. PSA: if your goggles are in 50mbps mode the amount of channels will go from 8 to 4 because you are using double the bandwidth (this video is made based on 25mbps). Great video mate, always come back here for a refresher course.
After a break I always find myself back here for a refresher on setting up some part of my DJI gear to get the most out of it. For clarity you're hard to beat, mate. Cheers!
Thank you for adding so much value to the DJI FPV community. It has helped me a lot.
This is the easiest to follow video I've seen on this. Great job explaining everything
This is the video I was waiting for! Thank you!
Hey Ian fantastic tutorial, you and J.B. are the two I go to for honest straight forward advice, and very understandable, thanks so much, please don’t stop doing what you do.
Thanks man I really appreciate the kind words.
Just done both hacks on a V1 Goggle & Air Unit with very latest firmware and everything worked a treat first time ! Thanks for this excellent video
Thanks for the vid. Quick note - the files still have to have .txt at the end of them. Your OS hides the .txt so it doesn't show, but if people have always show extensions turned on they will have to make sure to keep the .txt in their file name.
This guide works fine - thank you!
Heads-up: As of February 2022, with a UK purchased set of DJI V2 goggles, registered and updated to the latest version of the software, the steps in this video work EXACTLY as described.
I think users are naming their files incorrectly. The files written in notepad will automatically be given the extension .txt - your file names should be:
naco (for the air unit/vista)
naco_pwr (for the goggles)
If you inadvertently name either or both the files with .txt in the title, it won't work. This might make some users automatically go down the route of rolling back to earlier versions of firmware, which can cause a degrade in functionality.
The latest versions of the firmware work, no problem.
Thanks mate, i just got mine and have this doubt! Thanks a lot!
@@SantiagoVelezRestrepo Cheers! It's very easily over-looked. The rumour that the latest firmware somehow prevents this process from working is nonsense.
The guide above (whilst long-winded) is exactly how to do it and works like a charm.
If you want Betaflight OSD in the goggles AND more importantly - the system to operate in full power mode when the quad is armed - don't forget to open the relevant MSP port in Betaflight Confugurator for the UART that your Tx/Rx connections from Air unit/Vista and your flight controller are connected to.
To do this, on the ports page, switch on MSP under the Configuration/MSP - no need to mess with the other drop downs. Joshua Bardwell has an excellent video on the subject: "DJI very short range? Your MSP connection might be why.
In my case, on my Iflight Succex TwinG F7 4 in 1 stack, there's a plug onto the FC and it wasn't clear what UART it was connected to. Turns out, it was UART 2. :D
@@horatio321 perfect explanation! Thanks a lot for that, one question, do you recommend always put the RF signal in 1200mw, or just for long range, 250 or.700 is enough?
Same with TBS micro tx v2, (i have crossfire) is good to turn on always the 1W or 250 or 500mw is enough?
Thanks again mate!
@@SantiagoVelezRestrepo I think there is a strong case for setting the power according to your usage/conditions. If you fly where there are obstructions, or if you intend to do very long range flights, you need the higher power settings. The down side to higher power settings is increased heat and battery consumption.
My TBS module sucks the Tx battery at full power. So if I'm staying fairly close, I use the lower power settings.
@@horatio321 Thanks a lot mate!! I really appreciate that, cheers from Colombia
You are absolutely the BEST FPV hands on channel
Thank you
I have two V1 GOGGLES
ONE IS UNTOUCHED
OTHER IS MY EVERYDAY
I WILL NOT CHANGE THEM
1200
AND
50
PERFECT
I HAVE THREE MAVIC PRO
ALL THREE ARE ORIGINSL SOFTWARE FROM 2017
What a great video. Clear, logical and decisive. Thank you for your work. Appreciated.
Clearly explained and easy to follow video - even for a numpty like me - many thanks.
works great! just purchased v2 goggles a few days ago and what an upgrade over my budget analog set up. i mostly fly around the yard so 1200 mw i dont really need but its there when i need it. plus having more options than just 25 or 700 is nice too.
do u updated? ive just bought v2s and it goes updated to, i guess, 1.0.7. do it still works?
Thank you so much for making this video, I have now set up 2 Drones . As a newbie invaluable knowledge. Both Drones came locked with 25mw .
Thanks man.
Im a MAC user and so is everyone I know. Thanks for the files! You’re the man 👊🏻
Just did the hack tonight finally after thinking about doing it for 6months I finally did it! Thanks for the video show me how to! I can wait to go try my drones and see the difference! Thanks again much appreciated!
Enjoy
Thanks! It works 100% for me, I just bought my Goggles V2 and updated to te latest firmware. I am in the Netherlands. Keep up the good work!
WATCH OUT! Since a few days, DJI is rolling out a new update, or requests to downgrade to a different version of the firmware. This ensures that you can no longer hack, or perform software manipulations yourself! czcams.com/video/3wdaIFckAAw/video.html
Exactly what i was looking for. Thank you so much and keep up the great work.
Clear as fresh mountain spring water! Great video!
Thanks! Works perfectly on my Caddx Vista and V2 Goggles!
Thank you for making this as simple as possible!
Thanks a million for this great video - really well explained. An FYI for Mac users out there - I struggled to get this working. I followed all the steps in the right order but no joy - however I was unmounting the Caddx Vista after installing the naco.txt file. This seemed to negate the process somehow. Once I installed the file and just pulled the USB out without unmounting it everything worked a treat. Not sure if that's a quirk of my particular Mac system but just in case that helps anyone struggling with a Mac. Thanks again!
i too couldnt get this working b/c of Mac but he mentions in the video its something to do with the Mac Text Editor so you have to download his TXT file from the description. That ended up working for me. First video explaining the Mac Issue with this hack.
@@garychanchan I cant get my Mac to see the vista when I plug it in how did you manage it please?
@@uasflightops3410 Try different USB cord. Make sure you launch DJI FPV app, power on drone with Lipo, then plug in the vista.
Excellent. Just tested on V2 google. Thank you very much.
I just did hack to my Version 1 gogles and air unit and it works as you described. Thanks !
Very well done! Super simple to do. Liked & Subscribed (w/bell! lol) Thanks much mate! 😎🤘
Sir, thanks for detailed explanations - I could follow step by step and set the 1200mW
Brilliant! Thank you ,I’ve been trying to do this for a while now I was successful with your informative Video.
Thanks for doing this video seems your the only one doing v2 videos so it's much appreciated!! I tried the power hack it didn't take I need to try again. And also I can't seem to get the goggles on the newest .64 firmware but that's another story lol
Nevermind it works. I had to do a reset all on my goggles first and then do it.
Great news.
@@MadRC thanks so much brother much appreciated for all your work
Worked perfectly and simple! Thanks!
Can you send me the firmwares to do this ? DJI already is hidding this old versions in their website
Great concise video Thank you!🙏👍🏻
Many thanks ... concise and easy to follow.
Thanks for sharing 👍
Still works perfectly, thank you 👍
Hi, for me works perfectly fine. I use my DJI Air Unit (latest firmware) with DJI Goggles V2 (latest firmware) in the middle of Europe ;) I followed instruction - uploaded one file to air unit (it allowed 700mW), after that I uploaded second file to goggles - it allowed 1200mW. Next week will check how much difference will be between 25mW and 1200mW - my goal is to get higher quality behind obstruction. Best regards
I'm still not able to solve the problem on my FPV.
Can you specify the firmware version of the air unit? Did you buy the FPV in Europe / CE zone?
can I contact you by email? koen.verschuere@fixsus.be?
siema mam drona fpv i v2 gogle. Musze wrzucic dwa pliki jeden naco na karte drona, drugi naco_pwr na karte od gogli czy tylko na karte od gogli wystarczy?
Thank you, this video was helpful! cheers!
Just tried this on brand new V2s and it worked perfectly. Thanks a lot! ..... just gotta wait for this rain to stop to go out and test it :|
Cool and Congrats I hope the flight went well.
still works in 2022! thank you so much!!
Thanks! As of the end of December 2021, the latest/current DJI Air Unit firmware still accepts this hack.
Finally I got a success, important is to have the same latest versions in caddx vista and in the goggles and than it works. I have to try now video out to smart phone!
Great Tutorial , very helpful. Thank you very much for sharing.
Thanks for the kind feedback.
Thanks, this video is exactly what i looked for
Thanks a lot. Very well explained . Helped me a lot.
Great video but I have some thoughts and questions. If you can write to the internal storage of the CADDX, why not the DJI Air Unit? Do I have to permanently leave the SD card with the hack on it inside the air unit at all times now? Just mildly inconvenient considering I have multiple quads with the DJI air unit and not enough micro SD's. Same with the goggles, sheesh.
Great vid, you always have very useful info… I have the V1 goggles and they are working great… I just got the V2 as a back up… I tried to register/update but the new DJI Assistant FPV series will not work with my either of my Mac’s… OSX El Capitan 10.11.6… or macOS Monterey 12.0.1…
How do I update the V2 so I can use it… Does Windows have the same problem at this point? If not, I can use my neighbors computer. Thanks for your help in advance!!!
you sir are a legend worked first time many thanks so well explained swell
Gracias Crack, Funcionó a la perfección
Really good vid, thanks!
thanks mate, worked on lastest air unit firmware and v2 goggles at v01.00.06.04 (was afraid to try latest fw on goggles)
Just a quick question, which channel should I use in the goggles after doing this hack? Just bought a Pavo 30 drone and updated the Vista, I have V2 goggles as I bought them with the FPV combo. Many thanks
Well, that was easy.. THANK YOU!
Hi, please check the analog mod latency with the Goggles V2.
After the upgrade, the Goggles V1 had a delay of about 30ms. I wonder if they fixed this in the new V2 version
Thanks alot brother. You helped me out today
Ian I have a question regarding V1 and V2 goggles.
I have just bought a set of V2 as I (erroneously) thought they had HDMI out and in, as I wanted to use them with my Air 2 S and RC Pro controller, anyway that is now another problem for later. What I would like to know is how to be able to use both sets of goggles from a single air unit (me flying) so I can let spectators watch the flight with the other set. Do you perhaps know what I need to do as I note that you can only bind one set of goggles to one air unit at a time.
Your help is appreciated.
Got my sub with bell icon . Thnx for the video
Thank you so much for a wonderful video just got me some dji v2 and the hack worked perfectly,thank you keep up the good work!!!#burdfamfpv 👍
Thanks it was really helpful!
Hi & thanks for your great videos! Does this work with the Goggles V2 (the old ones) and the Avata?
Is the range going to be the same regardless if you are 4 or 8 channels but are able to go upto 1200mW? Or for max range do we go the FCC route (8 channels) and 1200?
Excuse my ignorance, im a noobie, i have the dji fpv with the goggles v2, i also own the older big goofles with the giro, racing edition, is it possible to use these with the fpv drone or broadcast to them from the v2 gogfles?
Also can you view the mavicpro2 on the new v2 goggles?
Many thanks
FYI: DJI updated the v2 goggles firmware to 01.00.06.06 on 25th February 2021 (probably straight after this video!). As of December 2021, my new goggles came with 01.00.06.03 shipped and the option to upgrade to .04 or .06. I chose .04 and although my Nebula Vista was .06 out of the box, the "hack" worked and I have 1200mw option. Thanks.
Did you try if the hack works on 01.00.06.06? Because my Googles have that version and I can't seem to get it working.
hey, thanks for the video. especially the whole 50mb video mode not in public channel and what channel it was. maybe its documented someplace but it's certainly not easy to find.
Also another question please. Does having the eight channels guarantee the FCC hack? Meaning is there a way to not have the FCC hack and still see the eight channels? Appreciate any help you can give me
Love these short and to the point vid's, thanks a lot. Very useful.
16 minutes video with information, that can fit in 5-10 lines of text?
is this legal in to do in the UK? or is it just frequency that needs to be set correctly to not break any law? i want to have maximum range at all time to prevent loosing signal on ether radio or goggles even if flying close it just makes sense not to loose your drone and cause an accident
Thanks ! Great video 🍕🍻
Hi thank you for the hacks one love great video.
ONE LOVE
So when doing this, if you do the caddx vista the goggles will automatically recognise and switch to FCC?
Hey.. what if im using the tbs tango 2? do I have to do something on it as well?
I did all you said in the video and thank you! one question.... why is it when I switch to 50mbs mode I loose all channels but the original 1,2,3, and public 8? For a moment it will show both channel 6 and channel 8 chosen at the same time. Then when I switch the channel i only get 1,2,3.
it happens with me too
@Mad's after the hack will it rebind with DJI FPV Drone and remote? I use my goggles to fly the DJI Combo FPV drone and other air units on a plane as well.
Hi. So I plugged my air unit in. I did as you said , but when I turn my goggles on and air unit It doesn’t show all 8 channels but it shows ch 8 public and I select that , is this still the same with the 1200 MW ?
Still on 750w setting -I'll have to try this soon. Thanks for the info
You won't regret it.
@@DeanF When you crank up the power will it interfere with other components or overheat at all?
hello, I have already done everything explained in the video and it has not worked for me neither in the glasses nor in the cadxx view that could be I have the v2 and version 606, when I connect the drone to the lipo and turn on the googles it does not let me accessing the menu only gives me the image will they have any defect?
that was easy, thank you Mads Tech
Important note for connecting the caddx vista. you need to power the viste BEFORE connecting to usb otherwise it wont show up as a drive. (at least that was my struggle some time ago)
I did that still did show up
Thanks for the video! But, question is this, is there an fcc hack for the DJI FPV drone? I can't even find power output options in the menus.
No their is not at this time. It’s entirely different firmware.
Hi, great tutorial. As you said the remote will follow, will this then be compatible with wtf os? Thanks
Fantastic, thank you!!
Is it normal that if you update the caddx vista (with the dji assist) that the text document with the 1 stays on the vista? Its kinda weird, did i have done anything wrong? Is there a way i can tell that im in the 700mw mode? Can i display the power output in my Googles?
Does the hack work on the latest software since i did it and my max output is 700. Maybe its the sd card? what do i need to format it to ?
I thought this would be a better place to ask my question about confirming that I really have 1200 MW. Does the OSD in the goggles says 1200 mw guarantee that's what the output is? Sometimes I feel like I'm not going very far on 1200 MW
Hello, I appreciate all the information provided in your videos. Do you now if its possible to hack the DJI Googles HD latency (RH) v1 to be used either in a DJI Spark or DJI Mavic Mini?
Where do u put the sd card in the air unit? Vtx or the stack?
if the bitrate is set at 50mbps will it stay with 4channel? On the other hand, in the 25mbps setting, the choice is 8 channels?
hi friend, for air unit dji is okay the max mw hack, but if do that for dji fpv combo, are you get anything better?
Hey thanks for this great video
I‘ve got a question.. is it possible to bind the caddx polar nano hd air unit to the V1 goggles?
Yea absolutely they are all compatible.
Hello thanks
But must i put this file only to air unit or for googles ass well?
Thank you very much for the video. One thing that is not clear to me, if I want it at 700, I only have to do it on the caddx? or do I also have to do it on the goggles? Thanks
Only Caddx. The Goggles one is for 1000/1200mw only. FCC is 700mw.
I did this years ago with my old v1 googles but I just tried it with my v2 and o3 and it doesn’t work, my googles keep saying I need to format my sd card!!!! I have a feeling I need a faster sd card, v30 probably? Do you know if that is correct?!
hello please help
I live in Austria and I think the dji goggles knows where i live and I am not able to change any settings inside my glasses at all. Does the hack still work with the latest update? And do I just have to put the sd card in the goggles and its finished or does this unlock more settings in the goggles because the look in the goggles looks a way diffrent know with the latest update.
I am not that long in the Fpv game so please help me :)
Nice tutorial man,,, i have dji google 2, and how to see unlock success or not with vista?
it worked thank you :))
I find the unit gets very hot in seconds I have a fan on it also, problem it is allowing me to select on 25mw ,but not allowing me to alter it. Before i wrote the txt file on the vista, menu wasn't available to me ,so i know the hack worked Just cant understand why i cant alter it. As the camera comes on ,it doesn't allow me back into settings to change it .
Is the menu supposed to be accessible once the camera is on ? As mine isn't. Any ideas?
Hi, my win10 pc doesn't allow me to interact with the Vista even if it sees it because it asks me to format it due to unrecognized file system in the Vista volume?
What should I do? I havn't updated to the last fw, it's still on 1.00.0606 which allows hacks, do you have any idea?
I'm afraid to brick the vista formatting it (in which file system...?)
Thanks
Hi, does the sd card need to remain in either the drone or the goggles after youve switched them on and changed the settings? Thank you for the info btw.
No once it’s done it will stay until you connect to Assistant 2 again. The second you connect to Assistant 2 for FPV it will reset the hacks so things like firmware updating will remove it and you will need to do it again.
Thank's man, I tried the Goggle text file to fly my DJI FPV Drone. But the menu is grayed out. Anyway I can make it work?
How do I know the best channel out of the 8 channels on the google. Which is best to use?
What happens if I use my V2 Goggles with both, the DJI FPV Drone and the FPV system on another Freestyle drone? When I switch between the drones, I need to set the Goggles to the specific mode, but will the hack work with the FPV system after I switched back and forth?
I’m in the US had no problems with my unit but for my VISTA. I have channels 1,2,3,8 but no channels 1-8?
Thanks! Will the Vista automatically output 700mw? Or do you need to choose the power output from the air unit in the goggles?
You should check it as it could be set to 25mw regardless. The vista works slightly different to the dji air unit in lower power mode too.