Our 1967 LT4 Swapped Camaro SS Hits The Highway For The First Time!!!
Vložit
- čas přidán 24. 10. 2022
- We finally made it to some highway speeds!!! This build is getting wrapped up and we just need to do a few more little tweaks. We are super happy to have this one almost finished and in the next video we will reveal what this sucker cost us to build! Its pretty wild, thanks for watching!!
DANG SAUCE 1/2 Gallon: hoffandpepper.com/pages/gz-ha...
-GOONZQUAD NEW MERCH!!(Very Limited): goonzquad.com
-Instagram: / goonzquad
-Email: goonzquadteam@gmail.com
-P.O. Box 37
Rossville,GA 30741 - Jak na to + styl
1.Subframe connectors are a must with the power you have.
2. Front end alignment shop can do it faster and definitely better than eyeballing it.
3. Headlights are killer, love em.
4. Definitely finish on camera, everyone loves this old school retro mod build.
5. You guys and your family are much loved and appreciated.
agree with every point!
I would like to see the process of addressing all the small issues before moving on to a new project. These are the things in projects that you can learn from. Not everything works right the first time and the troubleshooting process is always more interesting than something that just bolts together.
They don't like to show the people they have work on there stuff off camera in there video's
Make it 100%!
Problems are for solving => your community is behind you 100% ... The more we see the more we learn together and are inspired to press forward! Little or big, small or large, little time or a lot, we want to see it all!!!
I agree. Running through it so quick just to get to the next project isn’t what the people want. They want to see everything from start to finish. All the troubles and all the little finishing details are interesting.
I agree, fix all the small issues
Few things I would HIGHLY recommend.
First is subframe connectors on my 67 camaro I went with Ridetech they’re fully bolt on will stop that flex when u lift the car on your rack.
Instead of a brake booster I’d look at CCPs hydro boost. They sell a full bolt on and lines it saves a lot of room in the engine bay and looks clean. Again used it on my 67 and I have the same brake set up as you and it’s amazing.
Lastly I’d recommend doing RideTech full front suspension along with their truturn system it’s amazing and you can fit up to a 10” wide rim WITH the factory subframe. Again have that on my 67 and it handles like it’s on rails. Plus they have awesome true coil overs and with their hole suspension with the truturn your steering will be insanely tight and it’s fully adjustable.
Would love to see you finish this one up on camera. Enjoyed this build a lot more than I thought I would. Keep up the good work and content!!
Honestly we don't mind if you do another 10 videos on this car, it's worth it to get it tidied up :)
Exactly what I’m thinking. Why be in a hurry?
I hope you guys see this sometimes I wonder I owned a 67 Camaro and I am a GM guy and what you really should do is you can buy subframe connectors that are either weld in or Bolt in would advise it to stiffen up that chassis You wouldn't have to worry anymore when you put it on the lift it makes it one big frame not expensive either
it has subframe connectors
What i said before. Sub frame connectors .
$61,988 that's what I'd pay for the build.
I bet the sub frame and body mount bushing are bad ,thats whats causing the steering wander and popping noise over bumps and fender and door alignment problems. Check your subframe bolts are tight
Love y’all ordered the half gallon baby!!!!
Billy is turning into a beast of creativity. that front headlight is so sick
Guys definitely more videos on the camaro we want to see it 100% complete along with the frame reinforcement , alignment and all that you guys mentioned , porsche build can wait we all seen those enough, but this type of classic car build takes the cake!!!!
This is my favorite build by far, I don't see no reason to rush ending it. I would love to see this build finished 100 percent on camera.
I agree
Keep posting videos about this thing guys. I love it. There's no rush, and everything you do to fix it up is worth recording. I'm a classic car enthusiast myself. Take your time and don't rush things.
Congrats again for getting this far. I too vote to have this beauty finished on camera. I'm not a mechanic nor could I even begin to do something like this, but the sheer entertainment value of watching you guys tackle what would seem impossible continues to impress. My guess on a price sheet up to this point is $92,500.
Fellas, this build was incredibly impressive. I thought for certain that you were going to have to get some outside assistance when I saw that new wiring harness, but you figured it out and actually improved it, way to go. I think you need to spend some serious time on the suspension, it wasn't built to handle the extra weight you've added and probably wasn't meant to be driven as hard as you will most likely be driving it. Incredible job on this one. Could you please do a recap of all the vehicles you currently own? I was wondering what happened to the Audi A7 and the Tesla, or did I miss some vids that told where they went? Thanks for the videos, they're awesome.
Without a doubt this is my favorite build on the channel. Probably doesn't hurt that the '67 was my dream car as a kid. It's the first car I ever fell in love with. I remember seeing one for the first time on a trip to the local chevy dealer with my grandpa. Just hanging with my grandpa was pretty cool, but seeing that car for the first time was an experience I will never forget. They had a candy apple red '67 all chromed out under the hood and undercarriage with mirrors on the ground to display the chrome. It was one of the most beautiful things I had ever seen at 7 or 8 years old that was around '79 or '80. I don't remember the exact year but I will never forget the car.
How do you like the windshield instal
I think you’re getting a warning and regulated throttle because the ZL1 ecu isn’t reading the stock struts for electronic dampening. They make plug and play electronic dampening delete modules that plug into the stock harness by all 4 wheels or you could probably code it out without using any additional hardware. Thinks a beast. Good work guys!
Beautiful 67 camaro ....I have a 67 RS that I been working on and now in the first stages of driving it and making it more road worthy .. good luck to you guys awesome job
I have had my 67 Camaro for 20 years so I know your pain. I went old school with a 421 SBC and a tunnel ram. It was so entertaining watching you build yours. Inspirational and gave me some ideas.
I'd guess you all are around $59675
Don't rush. Excellence comes in stages. We are patient now that it runs. Make it top notch.
stupid is as stupid do , and if they don't Reinforce the frame that would be stupid for goonzquad to not do . 😵💫to seal the car for hi $$$ dealers to someone is a rotten thing to do to someone 🤢🤢that car came stock with 350 small block or a 6 cylinder ! not a LT4 ! so goonzquad have to fix it the right way or its nothing more then a SHOW PRITY NEVER TO BE DRIVEN . THE END !
@@lynnburson6728 You should read your comments before posting
If I had chance to make a build like this I would've spread a black coat for the classes, No rust
Mentioned the same thing a while back
Completely agree. Most work to get a car perfect is done at the end. Testing and tuning. Please do that and show it on camera. Why such a rush?
Would definitely love to see some of the final touches on camera. These last tasks always take the longest but you’ll start narrowing it in
Really enjoy your videos ! You guys never disappoint. I don't know what the vehicle laws are in TN, but it's nice to see you can do an engine swap like that in your state. Making me want to move there 😀. I'm guessing around 60 k , you spent on that build. Don't know what you paid for the car at auction. Seriously you should go get a truck or 70's car from the junk yard and see if you can bring back to it's "glory". That would be a bigger challenge for you two, because right now you just seem to be throwing money at these projects. Right now you have the tools and facilities ,where you don't have to spend that much on parts or shop work. I would really like to see you guys go find a classic junked car and restore it. Maybe a 70's or early 80's ( like 80-82). I'm really looking forward to the paint booth build. Keep up the good work!
I have a 68 Camaro I finished 15 years or so ago, you guys have inspired me to bring it out of hibernation and do some upgrades on it, thank you for the inspiration. I am thinking you guys have about $78,000 into it.
You guys should consider reinforce the frame underneath. All that power could lead to doors not closing and gap issues. Avoid a full roll cage, because driving it without helmet, could be dangerous.
Yes reinforcement
Stiffen the frame and a bar across the struts on the front.
They need to check the body to frame bushings ,there should not be that much flex .
@@MitchellEdwards222 flexing as it was doing on the hoist, imagine on the road at full power. Measuring the panel gaps before launching it on the road, could help knowing how much it's flexing.
@@novaracer2000 Doubt new cabine bushings would make that diference, only if they didn't had none. Excluding engine mounts, could be the frame rails flexing due to the different engine mount displacement combined with different suspension geometry.
Would love to see this 100% finished on camera. Getting every little thing perfect even if it's just bits and pieces in other build videos is worth it. Idk why you're in such a rush to end the build series... should be looking for every excuse to extend it! Please add "reinforce frame" to your to do list too!
Not going to happen they don’t finish any car
they just want to get this over with.. if not for folks asking for this build, they would probably just left it too hehehe
@@jeffliptak9784 unfortunately that is 100 percent correct.
Looking great! Back in the day my first Camaro was a 67... I've had several over the years but now I have a 69 and a 18 SS 1LE... I think your Camaro project is great your color is perfect the only negative I would say is the cowl hood does not need to be so tall looks much more proportionate at the stock 2 in just my opinion but hey enjoy it, and keep the Rubberside down. 👍
Thanks for watching ❤❤❤
Hit me up ⬆️⬆️⬆️⬆️🎉
No need to rush through, guys...we love watching the build, and many of us are learning from the things you guys do...
Really recommend you guys putting frame connectors on this Camaro. Also those were wire looms lol . Love this Camaro build by the way. Takes me back to my teen years
even without subframe connectors i`d like to think the body shouldnt flex that that bad.
@@leemer1 that engine has a lot of weight. More so than the old stock engines that use to be in them.
isnt that LT4 an aluminum block?
There is something wonky with that frame. They flex, but that is excessive even considering the swap.
@@leemer1 Yes.Both block and heads are aluminum.529 lbs fully assembled.
Honestly, I wouldn't mind seeing it finished on camera 100%. Agree about the paint too. For the price though I bet you're around $76,349 and 29 cents.
That's hilarious, I just guessed $80k in the nose. 😎
How can you think this car is worth that much, mixed matched wheels, so much dirt in the paint, I still see rust on the car... It's not a frame up restoration.... I love this channel but come on man, they did a half azz job building this car... For that kind of money you can buy a fully restored Camaro, frame off restoration... I'm just being real here man... I just don't see what the comment section is talking about with this car ... Sorry guys...
@@michaelsmall6818 I agree they didn't do things correctly but they just asked what we think they have in the total build, not what it's worth. You have to think the parts car was 15k I believe, it just adds up fast
@@michaelsmall6818 oh I definitely don’t think it’s worth that much. I think that’s how much they spent on the car
This car came out soooo clean loving the headlights you guys picked out
The pink clouds reflecting off of it made it look so good. If only there was some kind of paint job you could do to make it do that every time.
I like that you guys are taking the time to address all the lingering issues with the car. No need to rush it, enjoyable content either way
I remember the initial windshield install was half ass. I wonder if they ever addressed that or if it still looks like shit up close.
@@RayKinStL ay man 😭 its a classic car every thing takes time
@@RayKinStL they didn’t yet
Great build. Would love to see all the issues fixed and the final result in a dedicated video. I think this build and car deserves it! Also please get seatbelts and as others have commented, get it tuned. Will be a much better car with it.
I’m going to guess $75k for the build.
The best part of owning a classic car is all the looks you get. Might not be as fast or comfortable as newer cars but it gets more attention 👍
I would love to see the things you talked about on camera, like some of the other comments this has been a journey with this car.
Being from the 60’s i remember these cars and they were fast stock, but with the retro with the new engine and everything that you need to update was really fun to watch.
love seeing Pop’s working right along side of his boys, best content on Utube, keep at it, but get some seat belts please.
you guys should definitely get it tuned professionally
Needs to rev higher for sure
Captain obvious reporting for duty
their severe lack of mechanical knowledge of any sort regarding engines seriously impresses me.
@@cay378 really? Because they have been saying for years, they dont know what they are doing, and are learning as they go...
@@KarasouTengu after building cars for so many years and doing it full time you would think some amount of learning would come into play. They have done an amazing job learning bodywork and the likes, but mechanically it’s a mystery lol
This is by far my most favorite build. Keep up the awesome work!
you guys should do more videos on this car, yall earned it
main problem with that year is chassis flex there are plenty of frame stiffeners for that year Camaro, good luck great job.
I bought the same headlights for my jeep and they look sick on the Camaro. I can’t believe it they don’t look as cheap as I thought they would. Well made and I’m impressed. They look different but so good on the Camaro. I’m in favor of keeping them.
i think y'all have to reinforce the frame to kinda reduce or stop the wobbleness completely. it may not a problem now but in the long run might break in halves 😂 👍
Exactly what I was thinking 👍🏽
I work at Vintage Air woot! 🤘🏻. It’s awesome seeing the kits we design and build go into such beautiful cars 👌🏻
Great content, keep up the great work
It’s nice to have longer videos
The amount put into this build is around $78,000
Don't stop doing more vids on this car build. It deserves to be properly completed. I'd reckon it's up there with your Mustang build back in your OG days!
Guys you need to put the retainer clips in the window crank handles. You have come such a long way on this build, all the little details take a ton of time too. The Camaro is looking awesome.
All you have to do to put wondow cranks on is install the clip them put it on the tapered shaft where you want it then just give it a good smack and the handle will lock into place. You only need the tool to remove
New to the channel and really enjoyed the video! Loves yalls attention to detail and taking your time!
Thanks for watching ❤❤❤
Hit me up ⬆️⬆️⬆️⬆️🎉
Another awesome video! Been a fan for a very long time. I believe the first video I saw was the rv fire. That has been a long time and yall have come a long ways. Please be careful when you are "TESTING" as I don't want to see either of you get hurt. Things can happen in a split second that will change your life forever. You guys are incredible and my Tuesday,Thursday and Sunday are planned with the squad in them!
I’ve been watching you guys since the mustang build and I can’t stop watching you guys are great and you guys prove that family can work together ….and I’m gunna guess you guys have a total of 95000 into the Camaro and it looks good guys keep up the awesome content
I did your lying did I really
I love how you guys evolve with your background music,the mustang build music was so iconic 💯
Iconic? I can't remember it.
Super cool to see that you both seen this build through. I'm gonna guess 87,456. Keep up the amazing work.
DAAAANNGGG SONNN!!!! What a beauty!! Nothing beats a classic, even when it has some modern tweaks to it 😊
If you repaint, please don't change the colour, it's perfect as it is.
Thanks for watching ❤❤❤
Hit me up ⬆️⬆️⬆️⬆️🎉🎉
If you guys do go with a full respray, id love to see it stay the same color. its so Iconic and looks insane when done right. Also would love to see you guys find a different steering wheel or entire different dash for the car that will complement the speaker setup your going with, also having a wheel with slap shifters on it would be uber rad
Good list you got there. I'd also suggest some Race Seats, 4 point harness, line lock, some additional front bracing, like monte carlo bar or strut tower bar just to keep that flexing down a bit. The old car does not have the modern safety goodies so make sure you take the time to sort out the safety items before getting too crazy. Getting all the cosmetics will help - matching wheels, door handles chrome or no chrome and adding the classic Camaro scripts to fill those holes in your fender.
They need a damn 12 point roll cage !!
They gonna get killed In that mess !
These are my favorite Camaros of all time! One day! Great build fellas!!!
great build i had a 67 and a 68 Camaro and wish i hadn't sold them. i am going to say you guys spent 58500.00 on the build. please finish it 100% that's a sweet ride!
I'm so glad you decided to finish the car a 100%!! I love the car and the videos about it.
Definitely sub frame connectors. Keep the chassis from flexing under load and in the air. Care looks great. Love the build fellas. Bravo
I am a Camaro guy myself. Love this build. I am going to guess around $175,000 start to finish on this build including the paint
This engine rev so fast, amazing guys, 67 Camaro on the road again.
They make rack and pinion setups to convert your steering, around $1,500 and worth every penny. Great work guys , keep it up.
If you have the front sub-frame connected using original style rubber bushings check into polyurethane bushings (hard) to lesson the flex. Also some people put subframe connectors to stiffen it up.
Please keep showing videos of this build!! LOVE IT!! My guess for what you guys have in this car is $87,850
To stop the frame from flexing as much you should upgrade the subframe bushings from rubber to Poly or even solid mounts. Aswell as subframe connectors to connect the subframe to the rear frame rails and you will see almost 0 flex on/off the lift and will handle SO much better.
best / most challenging build you guys have ever done. i love this thing.
I'm so glad you guys went back and stuck with this build!! It's so nice to see some old school sheet metal back on the road again! Love the content guys! I'm guessing $78,720
To high classic parts not that expensive
When y'all need a break from your other build you can always come back to this one and do more extra work on it love seeing this beast getting work on. Blessings.
I love how your Dad is still there. As one of the crew. Maybe do a old Truck Not. Rat rod or anything just a nice old truck with some "OEM" new parts. Maybe put a voodoo engine in a old Ford truck.
I'd love to see this build in a sequential video lineup. I love this build.
I've watched every video from your quad days. And must say you young men have impressed me with your content. Because I'm 52 yrs old the Blue 67 is by far my favorite build. You guys are very impressive with how far you have progressed over the years and making this a family venture. I find myself getting meal ideas from Fatfigures foods and mom and dads dishes.However I've tried to buy some of your dangsauce and its always sold out . Keep up the amazing content and I hope some day to meet you guys as a huge fan not a stalker... Prayers to you and your family with the crisis in Ukraine.
69. Definitely 69. Black and chrome with side pipes and t-tops.
Congratulations to the both of you. Camaro looks amazing! My guess is $87,500 invested in this build. Whatever it is it was worth it.
Scam alert ⚠️
i was going to say this exact number n then i seen the comment 🤦
I want to see videos finishing this thing. It has been long time coming, you have done a great job so far. See it to the end.
Thanks for watching ❤❤❤
Hit me up ⬆️⬆️⬆️⬆️🎉
Oil pressure drops as the oil gets hotter. As for the burn out, you are definitely dealing with traction control. Love this car.
It's amazing y'all were able to swap and build a car yourself.
Thanks to this build that got me hooked to your channel ... Great work guys keep it up ...
PEACE
My Best youtube channel. That Camaro is looking great. Keep up the great work guys. Peace
Congratulations for you guys managing this build. Personally in a potential powertrain swap, I'd rather swap with it, all the electronics, modules, ECUs, display cluster, and wiring harness, from a donor car. Easier to figure out and maintain.
Best swap would've been just a chassis drop :D just drop the older shell onto the complete chassis of the new. Too bad the donor was just thrashed.
Man, my dad loved his 67. Familiar blue color. I miss working on cars with my dad. Beautiful Camaro guy.
You need to check the Subframe Bushings, car has to much flex considering it already has Frame connectors installed, Also check and make sure the Subframe is square, most manuals give you the specs and measurements. Had to do this with my 70 RS which had good welded subframe connectors.
2 favorite builds. 67 Camero and the Trackhawk. I would love to have either one or both.
Beautiful piece of art you guys built. Nice to see this project done. Someone will buy that in a heartbeat
I'm DEFINITELY not tired of this build. think we need a few more videos!!!!!
Favorite build! Would definitely like to see more builds like this.
Run it to the end %100. Alot of us want to see it completed fully and what the little issues are as well so we learn!! Love this car bigtime!!
$92,700 is my guess. It's an awesome build! One of my favorites!! Great work gentlemen!!
Great build guys. Love the color and the custom touches. I'll guess $62,500!
$84,200 that motor alone is crazy expensive.
didnt they pay $35,000 for the new camero wreck?
Good music at the beginning of this video. The music was a perfect fit with the step by step requirements for your A/C work.
On y'all's suspension, Detroit Speed has a front end kit that would help with the issues up front, that also have subframe connectors, and on the rear a 4 link would help with the back end staying put.
Those headlights are 🔥🔥🔥 Keep them on! 🙌🏼
4-link is a must. Internal cage and frame reinforcement. Professional tune.
Love what you guys do. You might try some subframe connectors to add some rigidity. I think you have too much power for the original unit body.
As far as suspension and brakes and steering goes id look at ridetech they have complete bolt in suspension kits for these cars Coilovers, 4links, Air ride, gearboxes etc.. They can definitely get all of your suspension issues sorted.
Great job on the build guys! I have to say I’m not a fan of the painted black wheels at the front only.
theyre in between on those rims, they'll either get the complete set of the black or the gray. They just had 20s all around before and wanted to switch the front to 18s to check on the clearence of the brakes.
I hope yall finally get some good suspension on it and size the wheels / tires correctly. Do it right! Dont leave all that work undone. Finish the project.
hay do what u did to the back windsheld to the front screen like im saying u put some kind of glue before u put the back on. i hope this helps
I think you got around 50k in it. love that LT4 motor. good luck. awesome job guys
*The guys are living their best lives what a build* 👏
Definitely one of my favorite builds. Being a restomod I like the headlights and tail lights. I like the gun metal grey rims better cause they're different. Paint color is on point. Love it! Cost. $82,967.53.
I like the grey too. The black looks too generic, like every other restomod out there
So good to see this thing finally near the end, been an epic series. I say the build totals 73k
Beautifully done Camaro. But if you mini-tubbed it you could of put wider tires in the back.
One of the best builds on CZcams at the moment. Keep the videos coming. Its worth watching every minute. I'm guessing you guys are 92k in it. Worth every penny for sure
LOL 92k and worth every penny? I guess you have never seen the build quality of a 100k Camaro? If they have more than 30k into that, it is not worth it. The build quality is not there. Half assed to the max.
You guys are doing great work. Don’t mess up all you have by racing these cars on public roads. Look out for the safety of others
they will crash it because these cars dont drive or handle like the cars they are used to . you actually have to drive old cars . i see a bent bannana car in their future . hopfully none of them die or kill others . they have no brains between them . young and dumb and filled with cum and not a brain between them .
100 percent agree, one mess up and hurt someone they will lose that shop and much more. Just getting caught would be some big time fines and a night in jail atleast. They can actually use these videos against them. Going to cost them millions one day
I hate to be a no fun finger wagger but I agree. It makes me nervous when they are on surface streets with minivans ripping and flipping u-turns with a drift.
I don’t care about them ripping around their industrial park but, yikes!
Well, at least I am not the only one calling them out on this. Especially ripping in a half assed incomplete car than is going sideways on them as they can't grip properly due to the fact that it is half assed. Don't care if they meet a pole, but would suck if they hit an innocent bystander, for the bystander, not them.
Love watching the all yall videos, but man can we get some more diesels in there watching the duramax, Cummins, and powerstroke builds were some of my favorites
Man we need to see more of that beast you guys did a great job but please put some subframe connectors on it it will be a different animal