How to Replace Low Beams In a 2015 Mazda 3 with Lasfit LA Series H11 Bulbs
Vložit
- čas přidán 19. 04. 2018
- 👉15%-25% huge discount on the best-selling LAplus series LED bulbs! Don't miss out!
www.lasfit.com/products/h11-h...
👉Get Your Free Test of the Newest 2023 LED Bulbs at Lasfit! Join us now to grab this limited-time offer. Don't miss out!
LINK: www.lasfit.com/pages/syle-vid...
👉 All LED bulbs work for 2014~2016 Mazda 3: www.lasfit.com/products/led-h...
NOTE: The LED bulbs in the video is old version. The LED bulbs on the page is new version.
Order the lights shown in this video:
Low Beams: www.lasfit.com/products/h11-h...
Follow us on Social Media:
/ lasfitautolighting
/ lasfitautolighting
If you have any questions feel free to contact us by:
Email: lasfitautolighting@gmail.com
Phone: (909) 758-7900
Or come visit us at our shop:
2235 E 4TH ST STE F, ONTARIO, CA, 91764 - Auta a dopravní prostředky
Limited sponsorship for Newest LED Bulbs Testing Provided.
Don't hesitate to contact us to grab this opportunity.
1. Contact email: youtube@lasfit.com
2. Please tell us your vehicle make, model and year
I had the same experience as not-a-bot9408 below. I changed both low-beam bulbs on my 2015 Mazda 3, and I would also like to insert my experience here:
The guy at Autozone said the Lasfit bulbs are Sylvanias H11. I purchased the LED's about $100 for two bulbs there. The passenger side is easy, and I suggest doing it first to familiarize yourself with how the plug is oriented to the socket. Bulb grease is a waste of money since you will get it all over everything, creating more problems than help. The driver's side is difficult because you can't see what you are doing. I consider my hands the average size for a man, but I seriously considered asking my wife to do this. After a few curse words and a backache, it was done, and I'm pretty happy with the result.
God bless you for this video. My fiancés car we bought from her folks went out and her dad said he couldn’t get to it and ended up pulling the whole fender well out and sticking his entire arm in there to change it before. I got the bulb out to switch in 10 mins
Thanks for watching!
We are glad to hear that this video can help you!😁
Others may have already said it here, but besides taking the two bolts out mentioned in the video, remove the air filter cover as well. Will give you much more room to get in there and remove the low beam on the driver side.
Thank you!
Its a really informative video. Although how do you change the park lights? I could reach the park lights but I don't know how to get it out.. I tried to rotate it, pull it, looked for a button to push to release the light but nothing works. Can you tell me how to pull it how?
Much appreciated.
Found it much easier to replace the L bulb from the bottom, by removing a few push pins and pulling down the left fender liner!
Thank you for sharing the installation tips, yes, as for some vehicles, it is a good idea to replace the bulb from the fender.
By the way, may I ask have you tried Lasfit LED bulbs on your Mazda 3?
Can you do one for the lower fog lights I sure it is the same type of light h11
we haven't had the chance to make one yet but here check this video of a customer who installed our lights into the fog lights very simple to do: czcams.com/video/uac4bvOsT3g/video.html
What kind of light is your low beam?
Does anyone know how to change the position light on a mazda 3 hatchback from 2015??
excellent - I'll get my low beam bulb in the morning
Thank you for the compliment! We look forward to hearing more from you after you install our LED blub!
Would you mind sharing a video with us to show how they perform on your vehicle?
@lasfitvehiclelife hey I did replace the bulb. It was passenger side, your video provided the easiest tutorial to accomplish the task. Thanks
Did you got any witness lights on the main board when installing the LEDs?
no warning lights if you used the ones used in the video or our higher wat bulbs. the DRL will need a custom harness to make the bulbs work if not they will flicker when drl are active everything else works fine
So if I install the high beam leds it will have warning lights in the dash or will the DRLs just not work? If the DRLs just don't work then I don't care but if it starts having warning lights n stuff then no that'll be a problem
Hi, no warning lights /error code in dash. The DRL will not work or flash. But you can use the load resistor to fix the problem. Please contact us by email: cs@lasfit.com
When replacing both high and low beams. Are the bulbs the samw size for both
H11 for low beam
9005 for Hi Beam
@@vmcc9070 FOG Size?
i am having a problem getting the globe out do they come out anticlockwise when you turn them out as it seems very tight to turn
Usually, you can remove it by twisting it anticlockwise. However, if that doesn't work, you can try twisting it clockwise instead.
By the way, could you please kindly tell us have you plan to install Lasfit LED bulbs?
i changed out my drl to led lights but they won't turn on . they do turn on when i turn on the high beams so the led lights do work. how to i turn on my drl?
Check our other video where we used a custom harness to make them work.
These look chintzy. Good LED bulbs will come with a wired in board to balance power to the bulb making them brighter.
I thankfully have small hands so the drivers side wasn't to bad. Didn't take off the filter either XD.
Yes, due to the compact installation space, you may need a little more tricks if you don't have some physical advantage, such as smaller hands.😂
Difference between DRL and Low beams ? Gen 3 Mazda 3
DRL and high beam work on a same bulb. But the brightness of DRL is the same as high beam after installing after-market LED bulbs. Because the voltage of DRL is lower than high beam.
Will these fit a 2014 model?
Yes, these fit your 2014 Mazda 3, for low beam
is there bulb flashing when the car is off?
i discovered that if i put all of my original bulbs back in (halogen) that the drl works fine. if i plug the led in the drl wont work because it's different current being sent to the computer in the car preventing the drl from working.
@@NewYorksFinest1 you are correct we had to use a custom harness to make the drl work with LED we have a video of it as well.
Why dont you just release the air breather clips and lift it out of the way when doing the drivers side? Its alot easier than doing it your way and fucking around with the fuse box.
OK, so what do you do if the light won't pop right out? Twisted about 1/4 turn and it refuses to come out.
That's strange. We never had the such trouble. You can try to continue to turn the bulb, or twist it in the opposite direction.
@@lasfitvehiclelife got it out. The wires were too tight, holding it back just enough. Popped those off and it came right out.
@@lasfitvehiclelife , we got it out. turned out to be the wires attached to it holding back just enough to keep it it from turning far enough to get it out..
@@herbie2001tdi Ok.
Did you replace the low beam only?
@@lasfitvehiclelife no, we did high and low. With new LED bulbs.
What about hi beam?
High beam is 9005, here is the link: www.lasfit.com/products/9005-hb3-led-headlight-high-beam-la-series
I need for my car headlight control unit Mazda 3 model 2015 can you help me or explain to me how is it
Hello, are you running into any problems?
Will that same kit work for the 2018 sedan model?
Yes, this same kit will work on low beam for the 2018 Mazda 3
So much easier if you just take out 5 clips and a bolt under the front wheels.
I did it the same way
Is it h11a or h11b?
H11. What's your car make, model and year?
I've successfully changed both low-beam bulbs on my 2015 Mazda 3, so I want to insert my experience here for reference.
Passenger's side is easy, if you know how to do driver's side, so I will focus on the driver's side. The hard part is removing power cable from the bulb using one hand without looking. You want to do this before removing the bulb from the socket, as the socket serves as your "second hand" to hold the bulb for you when you pull the cable. My suggestion is to practice using removing the power cable connected to high-beam bulb first, because you can actually see where you should press to get the power cable to disengage.
Once you successfully pull out the power cable, twist the bottom of the bulb to remove it from the socket (forgot it was clockwise or counterclockwise, try both ways). When putting the new bulb, you want to first connect the bulb to the power cable, and then twist it into the socket - again without looking, so you will need to feel and try. Pull the bulb and make sure it is secure once you are done, voila!
Great feedback, thank you very much for sharing your experience. 👍
I agree
Shipping to Mexico?
We don't ship items to Mexico at present.
Lol wtf, I’m gonna try this way. I did this 4 years ago and buddy said to remove the plastic under the wheel well and access it through there. Was tons of room to work with but broke some plastic clips so that was annoying.
😂🤣 Looking forward to your update.
Upgraded version LED bulbs work on 2014-2016 Mazda 3: www.lasfit.com/products/led-headlight-bulbs-exterior-interior-lights-for-2015-mazda-3?Social&YTB%20Channel&Mazda%203%202015