E30 to E36 Steering Rack Conversion SIKKY Swap Kit
Vložit
- čas přidán 29. 08. 2024
- James at SIKKY Manufacturing shows you how to swap and E36 steering rack into your E30 using the SIKKY swap kit with steering rack spacers and steering shaft.
The Sikky BMW E30 Steering Shaft Assembly was developed to make it easier to swap an E36 steering rack into your E30. The low profile design allows for maximum header clearance. The E30-E36 rack conversion and this steering shaft upgrade are required when using the Sikky LS swap kit.
Get your SIKKY E30 Parts here! www.sikky.com/...
These BMW E30 to E36 steering rack conversion spacers are ideal for anyone swapping out their E30 steering rack for an E36 steering rack. The spacers take up the additional space between the rack and the crossmember that occurs when swapping an E36 rack to an E30 front crossmember. No more need to weld on E36 mounting tabs to your E30 crossmember or stack washers. These spacers also come with low profile mounting hardware.
Follow us on Instagram and Facebook!
/ sikkymanufacturing
www.facebook.c...
www.sikky.com/
www.jeimportper...
Music By:
I noticed you put the bolt that holds the rack in from the top, with the nut on the bottom. I recommend putting the bolt head on the bottom and the nut on top. Otherwise, it's really difficult to get the bolt out once the engine is in place.
You should do this video with the engine still in. Show how most of us will be doing the swap. The hard way.
Also would it be suggested to drill and tap threads for the shaft if its a daily driven car?
You still still use E36 tie rods, you just have to get both inner and outer. I prefer them for their adjustment. Also tip for others, slide the steering rack bolts from the bottom since the engine will prevent you from getting them out later. I haven't verified but your shaft conversion should also cover stock E30 racks in E30s. I still need to find a factory M20 E30 to measure. There aren't many around.
Love the series
Looks like he is an apprentice...... that had to tie the engine out just to take a rack out
thanx bro . HUGE help!
anytime! thanks for watching
im totally buying that steering shaft
"Activities", haha. I saw what you did there. Nice work
😜
Very good video thank you for your share
MIKE ZOU thanks for watching!
Thank you for the video
where can I get those steering rack to subframe bolts? can't find them anywhere online....
It's under the steering rack bushings section
www.sikky.com/product/lhd-bmw-e30-e36-steering-rack-spacers/
You installed the new bolts from the top down, totally ruined the day of the next guy who try’s to take that rack out with the engine in the car haha
Yeah we went back and fixed that after realizing the same thing. Oops!
I’m about to go for z3 rack for my 1988 e30 and no engine swap at this time. Would your kit work or yours is exclusively for LS swap application. Thanks!
Yes it will work doesn’t have to be LS swapped
I cant find the kit on the site is it still available?
www.sikky.com/product-category/bushings/solid-steering-rack-bushings/
Curious if you would have any idea if e30 outer and inner tie rods would fit into an e46 rack . Im not using a e36 rack but im assuming it should be the same anyone know?
They would likely fit as far as diameter and thread size, only question would be what length would be after installed and if that would work. Worth a try!
Hey guy's, I'll be doing a rack swap similar to this (Purple Tag to E30 RHD) same product and use case for this swap as well?
yes, should be the same
Hi , can you tell me please, where can I buy all this parts, and how many pieces I will need, thanks 🙏
www.sikky.com/product/lhd-bmw-e30-e36-steering-rack-spacers/
Would this swap still require ls mounts for e30 and not e36?
Yes, it's an e30 chassis and has an e30 subframe so it would need Sikky LS e30 mounts. We are adapting the e36 steering rack to fit on the e30 subframe
Will this steering shaft work in right hand drive e30s? Because the starter motor on the LS is on the drivers side
Yes, we have heard from our RHD customers that it works. We have not tested it in house since we do not have any RHD e30s here but supposedly it works fine according to our European customers.
I threw a ls1 in my e30 and have the e36 rack it works
How did you connect the power steering lines as they on the opposite side? I’m looking for a fix before i start my swap and am considering your steering rack kit.
We have a power steering line kit if your going LS that has the right connections in the right positions for the LS power steering pumps. Are you swapping a different engine than the LS?
SIKKY Yes I have an 1995 s50 m3 motor
jesse Hopkins I habe an s50 in my e30 with garagestic kit just bend the stock hard lines or use late model 328 is PS lines
Can this work on a e34
i wonder too
possibly, have not tried. It's very likely that it could. If you measure the diameter of the shaft on both sides where the splines are and count the splines we can take that info and confirm if it will or not. Emails sales@sikky.com with that info.
works for a RHD?
It can. You would need to measure your shaft diameter and count your splines to make sure it’s the correct one before ordering. Email us with that info and we can tell you which one to get.
What is the part number of the e36 power steering rack?
The e36 steering rack is a couple different part numbers that have different ratios
Grab a z3 1.9l steering rack for 2.7 lock to lock or e46 330ci purple tag everything else e36 or e36 m3 is 3.2 lock to lock