Reviving A Jeweler's Gold Wire Roller | No Talking!

Sdílet
Vložit
  • čas přidán 28. 05. 2024
  • #jewelery #restoration #vintagetools
    Hey everyone,
    Watch the amazing transformation of a vintage gold wire roller in this restoration video. From rust to powder coating, this jewelers tool gets a new life!
    Embark on a journey of restoration as I revive a forgotten treasure - a Jeweler's Gold Wire Roller. From disassembly to assembly, each step unfolds, revealing the meticulous process of bringing this vintage story gem back to life.
    Experience the satisfaction of witnessing rust and grime vanish, replaced by the gleam of restored metalwork and zinc plated parts. With care and precision, I clean, repair, and revitalize each component, honoring the craftsmanship of the past.
    Follow along as I apply powder coating and perform necessary adjustments, ensuring both functionality and longevity.
    Join me in celebrating the completion of this restoration project, and witness the satisfying results of hard work and dedication when I end with my Beer Test of a indonesian "Bintang".
    Whether you're a restoration enthusiast, a goldsmith or simply curious about the process, this video offers a glimpse into the journey of breathing new life into old treasures.
    Best regards,
    Dr Beer Restoration
    Hey if you want to support me, you can become my patreon or invite me for a virtual beer via
    Paypal: paypal.me/NTRBeer
    Patreon: / notterriblerestorations
    and follow me on Instagram and Facebook
    / ntrprojects
    / ntrprojects
    I'm an amazon affiliate and I benefit when you pruchase the tools I use via the links below:
    Here are the links to the tools and equipment I use:
    xTool P2 Laser Cutter/ Engraver: ➡️ www.xtool.com/?ref=a33AnTM6OT...
    IMPLOTEX 3000 Compressor: ➡️amzn.to/40Xp5iK
    Powder Coating Gun: ➡️amzn.to/3XEnXhk
    Laser Pecker 2 Engraver https: ➡️amzn.to/3EhzLza
    Fein Multimaster MM 700: ➡️amzn.to/3Ia7xrg
    Bosch Professional Impact Drill GSB 18V-110 C: ➡️amzn.to/3I7Ttyh Sandblasting Cabinet
    420 Liter: ➡️amzn.to/3S62o89
    350 Liter ➡️amzn.to/3IyPj3V
    220 Liter ➡️ amzn.to/3IzYMYE
    Kamera - Sony AX53: ➡️amzn.to/3Kif4XB
    Grabby "McGrabface" Grabson: ➡️amzn.to/3Z506sc
    Music:
    Intro:
    Elegant Logo by Free Music | / fm_freemusic Music promoted by www.free-stock-music.com Creative Commons Attribution 3.0 Unported License creativecommons.org/licenses/...
    Result Scene:
    Timeless - Lauren Duski from CZcams audio library
    00:00 - Intro
    01:19 - CHAPTER 1: Disassembly
    03:54 - CHAPTER 2: Cleaning
    07:38 - CHAPTER 3: Metal Works
    09:10 - CHAPTER 4: Zinc Plating
    09:48 - CHAPTER 5: One More Thing
    11:17 - CHAPTER 6: Sandblasting
    11:54 - CHAPTER 7: Finishing
    12:39 - CHAPTER 8: Powder Coating
    13:56 - CHAPTER 9: Paint Job
    15:01 - CHAPTER 10: Hardening Gears
    16:10 - CHAPTER 11: Assembly
    19:02 - CHAPTER 12: Results
    20:37 - CHAPTER 13: Beer Test
  • Jak na to + styl

Komentáře • 284

  • @tonicoomesclark
    @tonicoomesclark Před měsícem +69

    Your parents KNEW you were going to do this restoration justice. Your Dad and Grandma are smiling down on you. 😊

  • @williamcole4612
    @williamcole4612 Před 5 dny

    Beautiful restoration, as always. The production values of your videos are incredible. Thanks for the reminder to turn on captions. Something tells me your dad is and was very proud of you.

  • @thomaslyon2112
    @thomaslyon2112 Před 7 dny

    And Brand new again! Nice job! 🇺🇸👍🍺

  • @aybikekolmas9839
    @aybikekolmas9839 Před měsícem +17

    I love your videos.
    For one, it's wonderful content with great camera work and excellent editing! Watching you restore objects is very meditative and calming to me. Like the "good kind of youtube videos" to watch right before going to bed! :D
    But there is more to it. The old, rusty objects would look like "trash" to most people. Something to get rid off, to throw in the bin.
    But the way you repair them and make them so beautiful and shiny again.. it's like giving them a second chance, a second life.
    Somehow, by putting your skill and effort and love in your actions of giving them a second life, you're not only restoring them, but also my faith in humanity. 🙏
    What we can achieve, when we don't focus on how old/bad things have become, but how to make things better.
    Maybe even applying it to relationships of any sort..? Putting this work and commitment into something you love is just so noble.
    You remind me of the traits I love most about humanity.
    Thank you and keep doing the work you love ❤

    • @NTRprojects
      @NTRprojects  Před měsícem +6

      It moves me quite a lot, when I see how many effort and nice thoughts and words you find to comment on my video.
      Thank you very very much for this. ❤️

  • @Vickie-Bligh
    @Vickie-Bligh Před měsícem +12

    Beautiful restoration, what a tribute to your dad. You did your parents proud. Congratulations on hitting the big 100K subscribers. You really deserve it. You have wonderful skills and talents for restoring, your filming and editing are spot on. I'm always excited to see a new posting by you, Doc Beer. Thanks for sharing this lovely piece of history.

  • @tfatcher
    @tfatcher Před měsícem +2

    Trouble removing the gear shaft? You are NOT an idiot. You give me hope when that kind of thing happens to a young person! 😀

  • @jsidorable
    @jsidorable Před měsícem +10

    A fine "Homage to Dad".....bravo

  • @90762709
    @90762709 Před měsícem +3

    I really like the “CC” narrative!

  • @jasonarthur1208
    @jasonarthur1208 Před měsícem +12

    Well done Dr. B. Awesome job.

  • @TheOnlyTherazan
    @TheOnlyTherazan Před 8 dny

    You have some very nice transitions between shots, it does help the video feel dynamic!

  • @ktl711
    @ktl711 Před měsícem +9

    Congratulations on achieving the subscriber milestone, and thank you for another beautifully edited and satisfying restoration! It's very meaningful that you will now be able to keep this reminder of your dad (and mom!) in your workshop, and it's exciting to know that it's already going to play a role in your next video! Very much looking forward to it!

  • @pigsydney
    @pigsydney Před měsícem +9

    I always enjoy your restorations,I can hardly wait for the next video.Bless your parents for giving this to you.

  • @HexenzirkelZuluhed
    @HexenzirkelZuluhed Před měsícem +6

    Congratulations!

  • @georgebrown8312
    @georgebrown8312 Před měsícem +2

    Wonderful job you did restoring the gold wire roller. It looks much better and it works like a charm too. I bet your grandpa would be proud of you.

  • @Aanjaneyapandey-wj7jm
    @Aanjaneyapandey-wj7jm Před měsícem +2

    you made your ancestors proud my man!!

  • @churlepatakha
    @churlepatakha Před měsícem

    You deserved 2 beer!

  • @giant-34rus
    @giant-34rus Před měsícem +1

    Отличное восстановление интересного станка ! Удачи в дальнейшем !👍

  • @patrix5614
    @patrix5614 Před měsícem +4

    Beautiful work as always. Keep up the good work. HOWEVER, i MISSED the Beer Tasting !!!.

    • @NTRprojects
      @NTRprojects  Před měsícem +3

      It is there! You might have turned off too quickly

  • @rosemorrison7075
    @rosemorrison7075 Před měsícem +2

    A beautiful restoration! And something special from your Dad.

  • @DrHutOfHandcraft
    @DrHutOfHandcraft Před měsícem +1

    First of: Congratulations again for passing the 100k !
    Can’t wait to see this tool in your next video, really curious for that. ✌🏻

  • @namngothe2060
    @namngothe2060 Před měsícem +1

    Your work is wonderful. Good effort and great skills. Your dad and grandma are smiling at you.

  • @bharatshah5862
    @bharatshah5862 Před měsícem

    LOOKS GOOD A JOB WEL; DONE

  • @robinaroundtown...2194
    @robinaroundtown...2194 Před 26 dny +1

    Beautiful job...
    Looks like you already had a little beer 🍺 in that glass from a first one...lolol 🤣🤣🤣🤣
    Always love your videos especially when the parts walk themselves around...lolol 🤣🤣🤣🤣
    I've been a cameraman in Hollywood for over 40 years now and used to do stop motion...
    ALOT of work...but ALOT of fun when it's done...
    But i enjoy watching your's and others videos on CZcams right now because I'm going through cancer...
    But I'll get better and get back to work at some point...
    Good job mate...

    • @NTRprojects
      @NTRprojects  Před 26 dny +1

      I wish you a fast and full recovery!!!

  • @CharlesBedwell-sn3wr
    @CharlesBedwell-sn3wr Před měsícem +1

    I love the chapter 13. I’m indulging in chapter 13 now for a couple of hours. Love me some I-10 Intuition. Local made and local drank. Raise a craft for a toast.

  • @marshallswanson696
    @marshallswanson696 Před měsícem

    Thanks again for the killer video.

  • @kendrahoffman7949
    @kendrahoffman7949 Před měsícem +2

    Whenever I see rivets, I am sad for them, because they did their jobs so well, but they have to be removed. But then whenever I see frozen screws and bolts, I am happy for them, because I know they're going to feel so much more comfortable once they've been cleaned up!

  • @oneshotme
    @oneshotme Před měsícem

    Glad you saved it out of the yard and restored it!! It deserves it!!

  • @BuffaloBillsSon
    @BuffaloBillsSon Před měsícem +1

    I just watched this and I subscribed at the end! Keep this quality up and your have yourself a regular viewer!

    • @NTRprojects
      @NTRprojects  Před měsícem +1

      There are many projects waiting for you

  • @dondalrymple5794
    @dondalrymple5794 Před měsícem +1

    Well done! Always a pleasure to watch. Can’t wait for the next video.

  • @ArtemisToo
    @ArtemisToo Před měsícem +1

    Taking up goldsmithing, eh? Well, whatever you do with it, it's beautiful -- you did it and your Dad proud!

  • @iseespots6014
    @iseespots6014 Před měsícem +1

    Can't wait till the next project, but also love how this roller came out!!!!

  • @colfergusson4242
    @colfergusson4242 Před měsícem +1

    Lovely resto, then a lovely beer 🍻

  • @MissLady-pq4hc
    @MissLady-pq4hc Před 24 dny

    Nice job.👍🏼

  • @piparalegal2019
    @piparalegal2019 Před měsícem

    What an awesome tool for you to restore. Your parents must have known how much you would enjoy restoring and using it! I know I enjoyed watching the restoration process. I undergo infusions to treat my chronic pain, so before I even *watched* this video, it got added to my "Infusions" playlist. There's just something so relaxing about watching someone talented restore tools that I've never used and put them to use! Great work, as always, and congratulations on the Silver Play Button!

  • @pfadiva
    @pfadiva Před měsícem

    Excellent resto! I like the as-cast finish you allowed to remain. Next project is something for your lady, maybe? Congrats on the 100K!

  • @Dorelaxen
    @Dorelaxen Před měsícem

    Damn fine work. I'll raise an Optimator to your health and success!

  • @gymnosophist7471
    @gymnosophist7471 Před měsícem +1

    Nice one Doktor! I’m sure your dad would be proud.

  • @Climowitz
    @Climowitz Před 16 dny

    I love this kind of videos and with yours it felt like i was also learning something, so keep the good job, and keep on talking about the processes, don't be afraid to be repetitive or technical. I love learning about restorations.

  • @adamweilergurarye5422
    @adamweilergurarye5422 Před měsícem

    Bravo!

  • @rankoldbeast3479
    @rankoldbeast3479 Před měsícem +1

    Good to have you back, buddy

  • @PetermusPrime
    @PetermusPrime Před měsícem +1

    Congrats on the 100k milestone. You do excellent work and it's been a pleasure to watch your work get better and better over time.

    • @NTRprojects
      @NTRprojects  Před měsícem +2

      Thanks for sticking with me on this journey

  • @Mikey__Mike
    @Mikey__Mike Před měsícem

    Congratulations on 100k! Loved the video, I always do :)

  • @vonHannersdorf
    @vonHannersdorf Před měsícem

    No talking, restoration, beer, cool stuff... Is there better channel than this?

  • @juless-pw1oj
    @juless-pw1oj Před měsícem +1

    Tachechen Herr Bier und Gratulation zu 100k
    Ich hab jedes Deiner Videos seit Deiner Vorstellung in der lafamilia Gruppe gesehen und geliked.
    Grüße
    Julian

    • @NTRprojects
      @NTRprojects  Před měsícem +2

      Hahaha danke Julian, erinnere mich gar nicht mehr dran die da geteilt zu haben

    • @juless-pw1oj
      @juless-pw1oj Před měsícem

      War sowas wie "hab 100% Corona-Kurzarbeit und mir ist langweilig...hab CZcams angefangen " 😅

  • @PD-be7ln
    @PD-be7ln Před měsícem

    It’s been great watching you improve your skills (and tools!) over time. You’re an inspiration. But I do so miss the beer.

  • @mediumstudio
    @mediumstudio Před měsícem

    Great colors

  • @mftmachining
    @mftmachining Před měsícem

    Klasse Arbeit. Als ich im Museum gearbeitet hab, hatten wir in der Metallrestauration auch das gleiche Stück. Gratulation zu 100k Subscribers...hast du dir mehr als verdient.

  • @NowInAus
    @NowInAus Před měsícem

    Lovely job. Your dad’s gift was perfect

  • @royreese993
    @royreese993 Před měsícem +1

    You are a Master at your craft, Great Video, Keep them Coming, From Ocala Florida, USA

  • @f75gunslinger
    @f75gunslinger Před měsícem

    I've seen many knife makers use a forge with a steel tube ( usually square tube for more room ) in heat treating . That will give you a more even heat across your parts instead of having the hot spots under the burners .

  • @DanielConstantinoS
    @DanielConstantinoS Před měsícem +26

    No long sleeves at the lathe please! We need you safe and sound. ❤

    • @WishintobeFishin
      @WishintobeFishin Před 23 dny +3

      It will only hurt for a second but yes!

    • @candyqueenify
      @candyqueenify Před 11 dny

      And please wear gloves 😭

    • @un-Lucky137
      @un-Lucky137 Před 9 dny +2

      ​@@candyqueenifyno wtf, never wear Long sleeves or gloves with any rotational machines

  • @garymucher4082
    @garymucher4082 Před měsícem +1

    Nice refurbishing job. While I have no idea what it truly is or even how it is used, it looks good all the same... Thumbs Up!

    • @NTRprojects
      @NTRprojects  Před měsícem +1

      You will see in my next video how it works

  • @Ale.K7
    @Ale.K7 Před měsícem

    Congratulations on 100K! :-)

  • @Michael-ul8bv
    @Michael-ul8bv Před měsícem +1

    Very nice did a good job

  • @ukpatriot
    @ukpatriot Před měsícem +1

    Another piece of history restored absolutely excellent work that you do.

    • @NTRprojects
      @NTRprojects  Před měsícem +1

      Thanks and best regards to the UK

  • @BB_Chaptsick
    @BB_Chaptsick Před měsícem

    Great restoration! Very well put together project. And, congratulations! See you on the next project.

  • @rtyrsson
    @rtyrsson Před 16 dny

    Congratulations on the 100,000 subscriber plaque! I found this episode enlightening. I've always wondered how goldsmiths and silversmiths narrowed wire and this machine speaks for itself.

  • @DarrenFuller
    @DarrenFuller Před měsícem +1

    Just found (and subscribed to) your channel and blitzed your videos. It’s been chaotic here and they’ve provided a moment of relaxing travel for me, so thank you. Plus your restorations look incredible, and I’m definitely here for the beer ratings

    • @NTRprojects
      @NTRprojects  Před měsícem +1

      Thank you very much, hope everything calms down for you soon

  • @Faesharlyn
    @Faesharlyn Před měsícem

    So happy or you! This is a gorgeous resto, i cant wait to see the ingots you send through!

  • @erictoddw
    @erictoddw Před měsícem +1

    Great work! You were missed.

  • @foxwhiskey
    @foxwhiskey Před měsícem +1

    A pleasure to watch. As always ! Regards and greetings.😊

  • @einufo
    @einufo Před měsícem +1

    Ich find's super, dass Guss nach dem Pulvern noch aussieht wie Guss!
    Bin auf das Projekt gespannt, wo Draht gewalzt wird . .
    Gruß Tino
    PS: Tolles Geschenk von Deinen Eltern und ganz tolle Arbeit von Dir wieder!
    I think it's great that casting still looks like casting after powdering!
    I'm looking forward to the project where wire is rolled. .
    Greetings Tino
    PS: Great gift from your parents and great work from you again!

  • @meninoandrade9833
    @meninoandrade9833 Před měsícem

    This is called professional restoration 👍💯👍 the best one

  • @theskyehiker
    @theskyehiker Před měsícem

    Quite a nice rolling mill. You can work any non ferrous metal besides gold. Silver, copper, etc. great job.

  • @michaelcaprio5269
    @michaelcaprio5269 Před měsícem +1

    A sublime restoration

  • @colleenmccarthy-evans3149
    @colleenmccarthy-evans3149 Před měsícem +1

    Beautiful tool, I look forward to watching you use it, and congrats on 100K subs! Cheers!

  • @user-cu9tx2qx4u
    @user-cu9tx2qx4u Před měsícem +1

    Круто 😊😊😊😊

  • @vinceianni4026
    @vinceianni4026 Před měsícem

    Hello mister beautiful restoration beautifully restored well done

  • @gndvl
    @gndvl Před 29 dny

    Wow
    The beer is from my country.. glad to see that! Hope you like it..

  • @andrzejporeda7281
    @andrzejporeda7281 Před 22 dny

    Super jest odrestaurowane ta maszynka do robienia makaronu Pozdrawiam serdecznie.

  • @jamesriordan3494
    @jamesriordan3494 Před měsícem +1

    Gut gemacht 🙌

  • @falkortechnologies8039
    @falkortechnologies8039 Před měsícem +1

    Respect for not editing out your "idiot mistake"! That was funny.

  • @dannraff
    @dannraff Před měsícem +1

    Been a while but good to see you back .

    • @NTRprojects
      @NTRprojects  Před měsícem +1

      Yeah I had to organize some stuff

  • @MrSteve280
    @MrSteve280 Před měsícem

    My grandfather used to have one of these. He said it was for little boys who misbehaved.

  • @billakosl.a3227
    @billakosl.a3227 Před měsícem

    Perfect restore

  • @larrykelly2838
    @larrykelly2838 Před měsícem +1

    Nice restoration

  • @foks6376
    @foks6376 Před měsícem +2

    Лайк 👍

  • @tedpreston4155
    @tedpreston4155 Před měsícem

    Wow, after seeing the condition of that rolling mill at the beginning makes me feel much better about mine! It's "modern," but really not very different in its construction.
    May you get as many years of use out of it as I have mine! (I think we're going on about 30 years!) It's a wonderful tool for recycling scraps!

  • @jonesy2112
    @jonesy2112 Před měsícem

    I reckon you're going to use that as a pasta maker. Specifically 'really thin spaghetti' and 'really fat spaghetti' ;)
    Great work as always

  • @ninovulkan9815
    @ninovulkan9815 Před 20 dny

    I watch the video. ;)

  • @eviesoap2655
    @eviesoap2655 Před měsícem

    So nice to see you! My hubby and I love your videos! ❤❤

  • @jonilviv
    @jonilviv Před měsícem +1

    Nice job! I just can imagine the golden wire diameter of 1 cm :)

    • @NTRprojects
      @NTRprojects  Před měsícem +1

      Well it starts as a thick short piece and gets rolled thinner and thinner. You will see next time

  • @xtender5
    @xtender5 Před měsícem

    Congrats! Very well deserved!

  • @EliGadsby
    @EliGadsby Před měsícem

    I appreciate the edit, captions, quality of video and restoration. You will blow up soon but not compromising. Quote me in 1 year when you are over 1m subs

  • @TheJanssenbart
    @TheJanssenbart Před měsícem +1

    Perfect video! Vielen Dank! But next time try one of our marvelous Belgian beers?

    • @NTRprojects
      @NTRprojects  Před měsícem +2

      Yesss I know it's time for a Belgian one 🙂👍

  • @florianpanko7552
    @florianpanko7552 Před měsícem +1

    Very nice Work. Would you test the "Altenmünster Bier". Its my favourite

  • @danajetton4704
    @danajetton4704 Před měsícem +1

    Hi, Not sure if the Red, White, Black was intended, if so very clever. Congratulations on your Milestone. Lovely work as usual. Jealous of all of your equipment.

  • @atuned85
    @atuned85 Před měsícem +1

    Nice!

  • @user-iv1pl9nl7e
    @user-iv1pl9nl7e Před 29 dny

    Good 👍

  • @mangamaniaciam
    @mangamaniaciam Před měsícem

    What a simply gorgeous restoration!!😎

  • @adnacraigo6590
    @adnacraigo6590 Před měsícem +1

    Very nice.

  • @Gonyos
    @Gonyos Před měsícem

    Well done, sir. A very satisfying video and great finish.

  • @Dirk-Ulowetz
    @Dirk-Ulowetz Před 27 dny +1

    Ich dachte zuerst, soooo alt kann diese Walzmaschine nicht sein, wenn da Passfedern drin sind...
    Ich begann 1987 mit der Lehre. Und bereits da waren Passfedern normal. Mittlerweile arbeite ich schon viele Jahre im Bereich Maschinenüberholung. Und da sind die ältesten Maschinen, die ich gesehen habe, aus den frühen 50ern. Und auch die hatten bereits Passfedern. Bedeutet dann wohl, dass deine Walzmaschine mindestens bis zu 70 Jahre alt sein kann.
    Ich vergesse einfach immer wieder mal, wie alt ich mittlerweile bin... 😅
    Nebenbei... bei mir am Ort gab es die Firma Dinkel, die Walzmaschinen herstellte. Allerdings mit Elektroantrieb. Während meiner Zeit in der Grundschule hatten wir da mal ne Betriebsbesichtigung. Wenn ich heute darüber nachdenke... Eine Horde aus 20 8-jährigen Kindern wuseln durch die Fabrikhalle... 😂
    Waren wohl andere Zeiten damals.
    Gutes Video. Einer der wenigen Kanälen, die ehrlich restaurieren. Es gibt ja auch Kanäle, wo auch Kunststoffteile "rosten". Hier ist das nicht der Fall. Einfach ehrliche, gute Restaurierungen mit viel Liebe zum Detail. Gefällt mir. Weiter so.

  • @davidjohnston330
    @davidjohnston330 Před měsícem +1

    One word-FANTASTIC 🤙🤙

  • @terrystrife4198
    @terrystrife4198 Před měsícem

    Satisfying!

  • @condar419
    @condar419 Před měsícem

    Great job. I'm so sorry about the loss of your father.

  • @persioboni9373
    @persioboni9373 Před měsícem

    Excelente !

  • @oneshotme
    @oneshotme Před měsícem

    BIG congrats on your 100k Play Button!!!!!

  • @Longing4theWoods
    @Longing4theWoods Před měsícem +1

    Incredible.

  • @South-of-Heaven
    @South-of-Heaven Před měsícem +1

    What a great day! Your video and HTR dropped.

    • @NTRprojects
      @NTRprojects  Před měsícem +2

      Sometimes the stars align perfectly in the firmament :D