Truss analysis by method of joints
Vložit
- čas přidán 22. 04. 2020
- The video consists of all the necessary idea that one need to analyse a truss by the method of joint.
1. Do check the following link to get information about meaning, the type of trusses, and method of analysis:
• Analysis of trusses
........................................................................
2.Tension coefficient method is here:
• Tension coefficient me...
Three Hinged parabolic Arch example including the maximum bending moment with SFD and BMD:
• Three hinged arch | Th...
3. Truss analysis by Method of section
• Method of sections | M...
__________________________________________
Conjugate beam method in Hindi:
• Conjugate beam method ...
STIFFNESS MATRIX METHOD
• Matrix Method-Stiffnes...
__________________________________________
ENVIRONMENTAL ENGINEERING PART2
Here is a video on formula for different steps of calculating formula:
Design of sewer
• Design of sewers || Wa...
_________________________________________________
Subscribe CIVIL LEARNING ONLINE for more engineering related videos
........................................................................
#Trussanalysisbymethodofjoint
__________________________________________
Truss analysis by method of Section:
czcams.com/video/2IFKrm3rRG4/video.html
p
p
Thank you so much for this, it was very hard during classes but you taught it so easily. Really appreciated 👏
Thank you, Sir. It was very helpful.
Man always doing so easily.ure the best. Gracias
Great job keep up the good work buddy
To the point video 👍👍
Thanks buddy...good explanation
This video really helpful to understand the begannier of civil engg
Absolutely. Will be adding some more examples soon.
Thanku u a lot sir after listening u class I got confident that I can pass the exam
Good explanation bro....Keep continue
Very helpful video sir... Thankx
Super anna very good expand ❤️
Thank u, very useful
Thank you so much sir very clear explanation 😊
Welcome dear
Tqq sir i was Help full chala bhaga cheppaaru tqq
Updated more videos on Engineering Mechanics & material science & thermodynamics excellent explanation we want more videos from you👏👏👏💯💯
Yes.
I am working on it.
Tq sir 🙏 for your good explanation
Good video thankyou
Excellent bro
Nice one sir
Good explanation sir Tq
Thanku thanku✌️✌️
thanks alot very good
Thanks alot 🥺
Thank you sir
I would really appreciate it if you could make a video about how to convert uniformly distributed loading on the truss to point loads.
Simply multiply udl with span it gives point load. And on multiplying the result with half of span it gives moment.
Thanks mate. You have cleared my brain. Thanks a lot bro 😎
Always dear.😎😎🤘
@@Civillearningonline how do I contact you by email?
Currently i am working on INFLUENCE LINE DIAGRAM of Structural Analysis 1. After that i will be adding some more examples on analysis of truss and frame by these Methods ( joint, graphical and section).
@@Civillearningonline I have sent an email.
Yes, i got your email. But i was unable to contact you on telegram. But you can contact me on telegram as well as WhatsApp.
Thanks sir i have really understood😊...please make more videos
Ok
Sooooopeer explanation
You choose simple prblm but explained concept clearly.
Reason is student don't prefer long video. But i am planning to add some more examples related to this method.
@@Civillearningonline ohh good add more related to method of sections also
Sure
Thank you so much brother it is really helpfull for me 🤗
Welcome dear
@@Civillearningonline dada fluid mechanics ko ne numerical ko vedio chaiako thaio
@@Prerana2323 hunxa. Soon
Super sir
thanx sir
Good explanation tq sir
Welcome
From Kenya capital Thank You sir
Lots of love dear.
Thank you very much for this helpful video but i have a question sir
You can email.
Good 👍👍
Thanks
👏👏👏👏
Upward & towards right side is positive else it is negative. Is it correct?
Yes, force is +ve on upward side and towards right too.
Its similar to Graph with 4 quadrants.
Can you tell me the name of book in which this question is taken?
Strength of material by RK bansal
Bro make one video on method of joints with lames theorem
Ok sure . I will
By next month u try to upload 🙏
Tell sign conventions for compression and tension , +ve for what nd -ve for what
Tension = +ve and compression = -ve.
👍👍👍
Thank you deaar
if angle not given then??
Use relation tanX=(p/b).
Bro make one video on moving loads
Influence line diagram for maximum moment on moving UDL
czcams.com/video/t2GHc6ovDUQ/video.html
How to find moment please explain...
You can find moment similar to what we do in SFD and BMD chapter. Taking sum of clockwise moment = sum of anticlockwise moment.
FAC value is 0.29 not -0.58 KN
How to write directly ten
And com
While solving you will get answer as +ve and -ve in each truss member. And after that put term(ten and comp) accordingly.
-denotes comp &+denotes ten sir
It's for representation.
Sir how to know if a truss is candid lever or not ?
It will be supported on one side only other end will be over hanging.
@@Civillearningonline oh OK sir , I got it ....Thank you sir
Speak little loudly
Sure dear.
Thank you sir
Good 👍👍
Thanks alot