Kwikset Black Friday Electronic Deadbolt 275 part 2 HOME DEPOT
Vložit
- čas přidán 22. 11. 2017
- I bought this lock, and the instructions inside the lock were wrong. Which is why I believe it is a Black Friday Special.
This goes over how to program it and how to set the lock up.
You can download the instructions at the address below.
Link: www.kwikset.com/products/deta... - Auta a dopravní prostředky
This video is a million dollar video. When I need to change the code in the last 3 year I always need to come back here because I forget how to programming the lock.
Thank you very much
Thanks Sir.
Had this lock for a few years. Batteries leaked. I cleaned it up and got it functioning but no clue how to reprogram. Those “ instructions” inside the back casing were gibberish.
Found your video. Part I and I was done.
Thank you!!!!👍🏻👍🏻👍🏻👍🏻👍🏻
Finally someone who fully explains everything the right way, directions on this device are trash
So true
Thanks a lot for making this video. I did buy one of these locks from HD back then, but I have been quite lazy to read the manual to install it.
Now, with your videos, I am more motivated to get it installed.🙏🏽
THANK YOU THANK YOU THANK YOU!!! Without this video my lock would have been trash.. There is literally no proper instructions for this except your video which made a nightmare become super simple..
Without watching your vedio I have no ideas what to do. Thank you for a great job that you do.
Another big thank you from Australia. We changed the battery and it stopped working correctly, now it's on point again.
Thank you so much
Oh my god. I can’t express enough how relived I’m after resetting the code. 😢 I looked at so many videos. Nothing nothing nothing worked. Can’t thank you enough
Thank you so much! That was way more difficult than jt needed to be!
Hey Lifesaver! I found this deadbolt lock in my cabinet and the instruction is in espanol!!! Then I found your video, it makes all the sense without using any app. So happy now I have a new lock runs on battery only, love it.
Amy Chen thank you so much!
good grief, i am so glad did this video.....yup brought on black friday and thought it was defective, just pulled it back out and followed your instructions.....thanks soooooo much!!
Thank you so much ! Your video was so unique and kind to teach us !
Yup! The manual is confusing..This is do helpful.. I got lost after step 2..it didn’t have info on how to operate regularly…this video is very helpful..
Thank you for this video. I had it for over a year and had several people tried to program it and were unsuccessful.I was up late and decided to try and find a helpful video and came across yours. So thankful, was just about to change lock.
Dude you saved my life!! You’re the man!!!
Thanks for letting me know!!! This lock was a pain! But it’s been working well for me since I’ve installed it
Yeah, the lock is a couple years old. Needless to say the box and instructions are long gone. So I did an extensive amount of research just trying to figure out the model number because after pulling the entire lock apart and off of the door completely, I realized there is not even a serial number/model number sticker. I have been using the key to get in for about 3 weeks and finally stumbled across this video. Really appreciate the help buddy.
Jarred thank you for video. After watching video it was a easy five minutes. Now I'm happy.
Excellent! Really appreciate the help
Thanks got it like a pro after watching your video.
Anthony, no problem. I'm glad I could help.
I knew I wouldn't be the only bumbling black friday shopper with this issue.
Thank you for the video. You should do more of this type of video since you are very good at explaining things .
Thank you for this video, I was about to throw the thing in the trash.
Thanks!!
Thanks for doing this video. Your videos is a life saver. Y’all don’t follow the manual that came with your Kwikset lock. I tried and it was a mess. This video explains it all…
Thank you! Glad to give back to the CZcams Community.
Thank you so much for this video! I was pulling my hair out trying to program it. You really helped me out.
This video saved me life!! I couldn’t figure out how to unlocked!
I appreciate all the thanks guys!
Thank you, I just bought this and I’m sure I’m going to get frustrated with the instructions and will refer back to this video. I was wondering why it was so cheap!
Thank you so much for this video , the only thing that helped me
Thanks! This made programming a snap!
THANK YOU SO MUCH!!! ……I was able to program it back in 2018 but now that lease expired & my tenant left, I tried reprogramming but without success.….I’ll be trying it again using your video. Kindest regards.
Nice job! very helpful
Thank you man, this thing had me frustrated
Thank you so much for this video!!!!! It's in my favorites now!!!! Great lock, trashy directions! 😂
💯🖒better explaining than the instructions thank
Thanks for your knowledge
Love this video! Thank you bud!
Thanks man!
Thank you so much! It helps so bad🎉
I will add my name to your thank you list. Actually had set this up a couple of years ago. Needed to reset and it was eating my sack lunch. Thanks to you it is now reset and working great. Thanks
Thank you! Tried setting this thing over and over with the directions in the box! The problem with the directions is they don't tell you to change the USER CODE FIRST! Besides that, let the lock symbol blink a few times before hitting enter as well.
Thank you for this video I was starting to get pissed off!!
Thank you, this really helps.. I have 916 and I was confused 😕.. you made very clear and easy with your illustrations.
YOU'RE A LIFE SAVER. I HAVE BEEN STARING AT THIS THING FOR HOURS! You nailed it dude. Seriously best how to video ever.. bravo
Thanks buddy
Thank you sir
Thank you
Good video 👍👍
Thanks Bro 👍
Got 3 of these and was about to return them
Kristin Wade well I hope this helped. I like the lock very much.
Check my description for the link to download the instructions from quickset.
Thank you!!
Awesome
My buddy's got one and the directions are a joke thank you so much for your video
Mark Brooks You're welcome! I hope this clears it up.
Also please read the instructions from quickest. I posted the link in the description.
Nice video thanks suscritoo😎
So when you exit the door, the user code would be punched in to lock the door. It's not working for me. Any thoughts?
I could never explain how helpful this was 😭 i was at the point of giving up. Thanks man
I did all the steps but it beeps once not being able to lock or nothing
Excellent video. Do you know if there is a way to mute the obnoxiously loud beeps?
feniansons I think there is, I haven't tried it yet. You can find the kwikset instructions in the description of the 1st video!
Thanks foe posting!, but how do you program the auto lock feature? It supposed to auto lock in 10 to 30 seconds after unlocking.
I have no idea, I dont think it does that. I could be wrong.
www.kwikset.com/products/details/electronic-locks/275-cnt-15.aspx
@@Dumps-R-Us thank you for the link & quick reply!
How do you add a one time user code I lost my instructions
I cant get it to unlock and get the key out what can I do? Please help!
Elizabeth Monje the key should lock and unlock the deadbolt. Try removing the batteries and manually unlocking your deadbolt.
I looked and looked. And as you said. Crappola!!! I don’t think you can mute.
My keys can be removed from the lock unless the door is locked and I can't get it to work.
Thanks for a solid video but how do you delete the preset code.
RICHARD PULLEN check out the comments for a link to the manufacturer’s instructional manual!
Thanks for this. Just got this also for 49.99. The instructions don’t do a good job explaining the difference between the programming code and the user code.
Hello Jarred
How can I program on my Kwikset smart lock a auto lock the homedepot sele for 49.00
Jose Roque, hey I don't know how to. Follow the link to the instruction manual. Read through it and it will tell you the steps
How do you get the default code to inactivate? I was able to set up the user code I want but the default code still seems to work.
Jenni Hembd, you must program the new user code, by
Having deadbolt unlocked and door open.
Press the original programming code in and retry
Sorry for the late response
To Delete - an old user code
Enter your Programming Code, then Enter key (◄╝)
press 2, then key (◄╝)
Enter your old user code you wish to delete
press enter key (◄╝)
Should here 2 beeps
next test the code you deleted while the door is open and it is unlocked. The door should no longer unlock!
If you need a video on it, let me know I will make it for you.
does anyone know how to stop making you push the three buttons before you put in your code. its a big hassle and i hate it.
Se puede usar para lado derecho y para lado izquierdo de la puerta ? Muchas gracias.
????
Thank you I was about to lose my shit
Hello. How can I change the 1234 code
I already program my new code but still have 1234
To Delete - an old user code
Enter your Programming Code, then Enter key (◄╝)
press 2, then key (◄╝)
Enter your old user code you wish to delete
press enter key (◄╝)
Should here 2 beeps
next test the code you deleted while the door is open and it is unlocked. The door should no longer unlock!
If you need a video on it, let me know I will make it for you.
Can i add 6 number code or it only allows 4 digit codes for open or lock?
Chinnam I do not know
You could use between 4 to 10 digit.
I can't figure out how to make it a code it just won't expect it
How long does is take for it to auto lock?
No auto lock as far as I know. This is the cheap 30$ black Friday deal from 2017
My won’t work. It does everything it suppose to up until you go to lock it back by pressing the lock button
I’d reach out to kwikset. I don’t know how to help
My mother and I got it for black Friday... I watched this video and I wrote down step by step how to program both codes. (I know the steps by memory now)
. My problem is user code is not working but the programing did take, it works. I'm having the same problem with mine and my mother's . I tried to program different user codes and nothing.. It does even lock by pressing the lock button.. 🙁🙁
Robert Salinas, follow the link in the description. It's kwiksets instructions. Maybe it will be more clear.
Start fresh by pressing the reset button. Hold it for 5 long seconds, until you here 3 beeps.
I also found that the lock, will only let you change the programming code [pc] after you change the user code.
Remember, 2 beeps while programming means successful.
3 means failure.
This lock is very retarded to program. To save you a headache, near the battery has a reset buttom. Reset everything and follow this step by step.
Step 1, removing 1234 default user code. Press 0 0 0 0 press enter then press 3 then enter. This will remove used code 1234.
Step 2, create new user code, press 0 0 0 0 enter, then press 1 then enter, now enter 4 digit user code press enter.
Step 3, removing master code. Press 0 0 0 0 then enter, then press 4 then enter, now create 4 digit master code then press enter. You will hear 2 beep if setup correct.
Because this lock is hard to set up follow each step. Always creates used code 1st before you can create master code. Used code for everyday use. Master code is for maintenance or battery replacement or need an over ride to create new pass word.
Bro my kid accidently changed the programing code how do i change it
Ihtishaam Hussain reset it back to factory and set it back up. Unless you know the code he used but either way. Watch the videos and follow the instructions 😃good luck my friend.
I posted the link to the instructions in the description area for further help.
Thanks man i got it fixed
How do you delete the default 1234 code ??
It’s been a few years since I posted this, jump to the link in the comments, it should take you to the instructions
Followed step by step but after the two beeps it won't lock deadbolt? It will simply beep 3 times. Help
I’d reset the lock to factory settings and start over , just to clear it up
kwiksetprodstorage.blob.core.windows.net/documents/kw_ig_5066877_275.pdf
@@Dumps-R-Us got it to work thanks!
How can I change the code on my door lack?
Watch both videos, it will show you
How to mute the beeping?
dragva703 www.kwikset.com/products/details/electronic-locks/275-cnt-15.aspx
Can you show me how to delete the company code 1234 I tried to do but I can't
It should be in one of my two videos 😊
How do I delete the 1234??? Anyone can break in
I’ve got no idea unfortunately. It’s been a long time since I posted this
How to set the timer
There is no timer on my model that I am aware of
How to remove this back plate to reset the lock ??
Slide the black plastic cover “up” it’ll pop off
@@Dumps-R-Us thank you
@@Dumps-R-Us I just recently bought this home that has this lock & I live alone by myself …. They have handed me just one key 🔑, not sure if I will be able to reset code or that will help with little secure peace of mind or I may need to get a new lock since who knows has other key 🔑 or multiple keys
Your video seem working for me
Thank you so much dear 🙏🏻
@@LovingMyLife_ good luck, if you read the instructions you can reset the key code. Problem is you could buy this mew probably cheaper then re-keying it.
@@Dumps-R-Us yes I will just get a new one , where do I read or find proper instructions for this septic lock besides ur video ??
How come the 1234 pass code still even working i change it already
Don, this video is helpful but it still missing one part where you need to remove the user code.
To remove used code, enter master code, press enter, then press 3 then press enter
I had the same problem, the 1234 default user code still work even I create a new user code. To fix this problem follow this step.
Step 1, input master code, then press enter, then press 3 then press enter. This process will remove all user code, included manufacturer default user code and your new user code you just created.
Step 2, set up new user code, input master code, press enter, press 1, press enter, add your new user code then press enter. Would fix the problem for sure.
How to mute the damn lock? =(
Antumusic I’ve got no idea
This thing is such a POS. It has gotten to the point where I can't even use the code 1234 after I reset the device. Anyone else having this issue? About to tear the damn door off its hinges.
Brandon Bennett, did you watch both videos. It can be a hassle for sure but I tried to explain to the best of my ability on how to make the lock work.
Thank you
Tirek Hamilton you're welcome!