Wind Towers Scotland Ltd - 5min video
Vložit
- čas přidán 17. 07. 2013
- A short video showing the process of manufacturing a wind tower at Wind Towers Scotland Ltd in Campbeltown - Scotland's only wind tower manufacturing facility. The video also shows the slick process of transporting the towers from the site to Campbeltown harbour for transportation.
- Věda a technologie
Wind Towers Scotland Ltd Videos Chanel Is The Best 👍👍🙏
That ... was a good video 👍
thank you good job
pretty efficient machine.
Love it.
Do you know what project these were manufactured for?
In this vedio no shot blasting used. Why ?
Nice job
The video is great.One query,do you need polish the shell surface before doing sand blasting?
Thanks, Sean, we appreciate the feedback. To understand more about the process, I'd encourage you to contact Wind Towers Scotland direct. They will be able to tell you more about their work.
Any way,thank you for your responds.
They grind off the welds to make them more smooth, otherwise there will be crevices where they will not get paint on. Sand blasting is done just before painting as they tubes rust pretty quickly as does any steel except stainless of course.
Hello Mr.... I 'm Froom Indonesia
I Like To Your Chanel 👍👍👍
looks good welding
what is the atmospheric pressure of wind is required to blow the tower
One bar, absolute
Good! efficient machine
what is the dia and thickness?
Nice
What is the machine you are using for edge preparation of sheells
It's called an edge blaster. Used to prep steel for welding
Very very nice
جميل جدا
Granding job pleace
hello i have a question, which welding machine is used for such processes?
would be very happy about an answer
I actually work for a company similar to this here in Texas. For welding we use 0.45 hard wire to weld root passes for the plates that are bent into a cylinder and also when they are fit up together. Afterwards they are welded with a Sub Arc welder. If there is any defects within the welds, they are gouged out and repaired using only .045 dual shield flux core wire.
saw 121
I saw an man using a yellow machine what is the name of that machine
Good wind turbines
Metal fab
Marketing Guy: "Our state-of-the-art facility uses advanced manufacturing techniques..."
1:05
Operator: "...and then what I do is I go back and forth with the roller machine knob, kind of eyeball it really, and I got this scrap metal my buddy made to double check it"
Proceeds to show you a huge flat spot with the sweep gauge
عندي خبره في مجال تصنيع البايبات
لحام حلزوني او طولي
وعلي اي سماكة حديد
مرحبا انا من العراق من اي بلد انت
@@ffffff3756 السلام عليكم انا لحام بايب هل توجد فرصة عمل رقمي الجوال و الواتس اب/96407711678331
good
Where is the earth clamp when welding the job in the machine? Always have it directly on the job. If you rely on erthing through the machine you can get arcing accross bearing clearances leading to bearing failures.
When are they employing
how to apply operator?
I'm welder SG I'm welding plate and pipe.
David
White block interior parts name please
I think without sandbasting applying of paint not good.
it was already blasted to grey steel.. spec is SA2 1/2 cleanliness, 60 - 75 micron profile on those.
Is all the welding done manually? There is no sub-arc welding in this facility? Seems like a natural fit.
W Ana and have been
Adds a little more
Do you still produce it now? or any update? thank you.
Unfortunately the factory closed a few years ago, a local contractor now owns it but it remains largely unused at the moment.
Vestas?
Hi sir iam QC and Production experience sir
Dear Sir
We would like to introduce ourselves as manufactures for Stainless Steel Pipes, Flanges & Pipe Fittings
Material Grade : SS 304/304L, 316/316L, 301, 301LN, 309, 310S, Duplex 2205, 2507..
(Specialist in High nickel alloy)
Sanghvi Overseas
Mumbai - 400 004,
Maharashtra, India
Tel : +91-22-6659 5387
Mob : +91-9867 754 399
Email :info@sanghvioverseas.com
Web :www.sanghvioverseas.com
i am weldar
I like to weld this type of job
HOW CAN I DOWNLOAD THE MUSIC 😛
No NDT in video :(
Hi David ( Thai Land )
Saw and CO2 welder huaaa
I am a SAW welder
There is no room for error with that rolling metal , if its overolled nigh on impossible to correct with that thickness of steel plate .
Probably why some of the damned things keep collapsing like bent drinking straws. Many wish they all would. www.google.com/search?&q=wind+energy+backlash
Steel cans can be re rolled after welding. I can re roll can to +-3mm on the diameter.
IM a Pressure vessel designer that worked with upto 8” rolled steel. 10 years have never seen a shell rolled not within tolerance. There are ways to deal with overrolled shells.
No fume extractor for all welder, not gooooood
Jean Aimarre Yes I thought the same thing as I am a ex metalworker with lung problems from smoking and the trade .
It's crazy, absolutely crazy of is true..
Manual welding
Manual painting
It is f...ing hard job...
@@barmalei9927 For sure. Sub-arc welding would be beautiful here.
Hu
I am a tig welder
I am a rolling operator operator I have 15 years experience
give me drawing you work take
Gahir wtir
Vijay
आई एम एस ए डब्ल्यू ए डे फॉर इंडिया गिव मी अ कंपनी
We are a professional dished heads manufacturer from Yixing, China with 18 years experience.
Following standard: ASME, DIN, NF, etc. sales@disheadforge.com
i m a fabricator
Diploma engineering work in your company I am experience holder this tank
Me allso a rolling machine operator... Please give me a job
good