XL6009 Boost Converter Upgrade

In this video I made very useful feature in XL6009 boost converter module using just few components.
As XL6009 is boost converter that means it can only step-up the input voltage, if we give 12v input it always vary from 12v to above and my circuit can offer voltage from 1.2v to 40v output at 3A which is very useful for any experiments and it just works like adjustable power supply.
As I have shown the inductor which has two coils with opposite direction and connects as the given in circuit diagram.
Circuit modification details here -
innovationic.blogspot.com/202...
Watch XL6009 Upgrade
• XL6009 Upgrades
#buckboost #converter #boost
xl6009
lm2576
lm2596
boost converter
buck converter
buck-boost converter
xl4015
300w converter
100w boost converter
XL4015 module
DIY converter
upgrade xl6009
best xl6009 upgrades
how to make buck boost converter
how the dc to dc converter works
how to make dc dc converter
best DIY lab bench power supply
how to make power supply for electronics
best electronics circuit for converter
inverter circuit
converter circuit
working of converter
powerful dc to dc converter

[@tageandersson3043]

Thanks for a great video explanation above XL6009. Just notice, you mention this regulator only is a BOOST converter. Uptodate, this XL6009 now is available in both version, at same PCB. That's means, it's a BOOST and BUCK converter.

[@innovationic]

Most Welcome 👍

[@jubinroycreation9939]

How long it can run on 5v 1amp to 12v 1amp output? Will that ic get damaged?

[@innovationic]

in the input max current limit is 3A, giving 5v 1A works fine

[@MunishKumar-gw6kw]

Bhai circuit diagram ke saath show kiya hota to thoda samajh bhi aata, log theory ke saath relate kar paate. Remember, diagrams are the universal language of engineering!

[@innovationic]

Next time I will do better, thanks for suggestion

[@user-bi2lx7ou7i]

Can you explain with circuit the change to be made and then make the upgrade ?

[@innovationic]

first thing remove the inductor from pcb
and place new inductor with 4 wire just like transformer which has two coils a secondary & primary, now connect primary coil to XL6009 SW pin and input VCC.
Now the second coil i.e. secondary coil will connect at GND and diode to which gives the output, that's the modification you can do and make its buck-boost converter

[@tcw8431]

excuse me , can i upgrade xcluma 150W Dc-Dc Boost Converter 12-35V/6A in the same thought?

[@innovationic]

yes you can

[@saeedabu3507]

How can increase output Amp of XL6009 module? Please convert the Amp.

[@innovationic]

output amp of xl6009 is maximum 3A its maximum rating of xl6009 IC

[@idadizzul9577]

What is the henry value of the inductor?? 🙏 thanks

[@innovationic]

200uH or 0.2mH

[@TheJavaSync]

​​@@innovationicprimary or secondary? Or same on both?

[@daniloizaias5083]

Please with this update will it work with 5v 1a to 12v 1a?

[@innovationic]

after update it works as normal as before

[@yoppindia]

How is the load regulation?

[@innovationic]

load regulation works fine as before the modification

[@sahilali1815]

10 to 15 ac amp

[@yoppindia]

@@sahilali1815 10 to 15 ac amp is big number, you can't achieve with this circuit

[@abbiemanyu]

how to make the inductor? and what size?

[@innovationic]

wind two 0.6mm wire parallelly of 30 to 40 turn and one coil goes to Switch pin of XL6009 and other to VCC input, and other coil is the output which is connected to diode and GND.
The inductor core is taken from SMPS dc filter, size is
Outer diameter = 17mm
Inner diameter = 13mm
width = 6mm

[@and2749]

can i use 0,5 mm wire ?

[@innovationic]

yes

[@and2749]

thanks sir

[@sanjaykhurana3400]

जादा देर नही। चलेगा। कुछ देर तक। टाईप ओर चेकीग। के लिऐ। सही। हे..

[@innovationic]

aap try kiya h

[@alishahzarasif422]

How to increase itsvoltage rating

[@innovationic]

its ratings are fixed by XL6009 IC

[@sahilali1815]

Dc to ac converter

[@innovationic]

yes I am working on it