RC Reviews - ESS-AIR Engine Sound System (from Banggood.com)
Vložit
- čas přidán 17. 12. 2015
- You can see this great little device by visiting bit.ly/1M4WkWK
This is a great little device for adding real sounds to your model. It holds two ‘model’ memories and each of those model memories can hold one engine sound and two additional auxiliary sounds. The unit comes preloaded with the sounds we show in the video.
Useful links: RCPlus application page(PC software) - www.sensehobby.com/index.php?m...
Thanks to Banggood.com for supplying this unit
Thanks for watching, please LIKE and SUBSCRIBE
Happy flying!
Thanks for great review as always . . Be nice if there was more sounds available for this sound generator . . Merry Xmas
Given the size and complexity of a model this is likely to be used in SBUS input would be nice since channels out of the reciever are usually at a premium in PPM setups. Being able to select the second set of sounds remotely would be nice too.
Can't think of anything better than a nice large Spit with a roaring Merlin on a low pass.
Great video, thumbs up :)
I do like the idea of the product. toyed around with the idea myself a few years ago. great vid. now we need some decent reliable smoke system to go with it ;-)
+AndyRC I'll keep looking ;)
hook your vape up to it:)
Great video again sir! Thanks for that :)
Do you know if the middle piece of the speaker allso needs to be stuck to the same surface as the outer ring?
+DutchRC Adventures we just stuck the other ring to the side of the model. Seemed to work fine. Happy flying!
Thanks for the quick response sir! :)
Do you need to mount the speaker over a hole to allow the sound to come out?
Hi, Thanks for yet another great video. Can you fit it to the inside of FMS foamies?
Depends on the foamie. You will need a decent surface to mount it against..
Fantastic, now I can make my quadcopter sound like a tank! ; )
+M390VI Now that's something I'd like to see! ;)
+M390VI - I don't believe those are speakers, but rather, transducers. They use your airframe as a speaker to put out the sound. Consequently, they create a lot of vibration. At least the sound system I have that looks similar to this one uses transducers and they produces a lot of vibration in my airplane. That is not a problem for the airplane, but I think it would completely overwhelm the sensors in a quad's flight controller given how sensitive they are to vibrations.
Hi banggood, the ess one is not loud enough. Can I download car sound to this system?
How much does the system weigh, specifically the speakers? I never really held much interest for these modules but the the idea of an overpowered 250 with a massive engine noise is compelling and would be pretty fun to play with.
+MicroRCFiend The weight is on the listing on Banggood.com. Sadly it maybe a little heavy for the smaller quads ;)
Thanks, yeah it s a little weighty for a 250 unless speakers could be changed for something lighter.
Out of interest, what would be needed if a CP heli pilot wished it to work for pos and neg pitch? Any mixing or maybe it would still work plug and play?
Adds about 120g. I have it in my p-51, it is awesome.
As it is the ESS AIR, does it work with car sounds as well, with reverse? Thanks
No idea, sorry. Best of luck!
Is there any way to add your own sounds? Or is it another throwaway-when-manufacturer-page-down thing?
+superdau Looks like it, but only for the Aux sounds..
They have like 13 planes now. The me262 sound is awesome.
+Nathan Knight Can you provide a URL? I can still only see two on the website..
+Painless360 no url, it's in the software. You have to sign in and go to the store.
+Painless360 www.sensehobby.com/index.php?m=content&c=index&a=lists&catid=48
Thanks for that - still only two planes in the resources tab though..
You have to go to the store tab and install them. I can do a video later tonight if you can't find it.
Hi is there a way to reverse H/L throttle sound.Cheers
is this only for aircrafts or does it also make car/truck sounds too?
Not sure, this is an old video... best of luck
Hello Sir I'm back, Sorry to bother you again. I still cant get the ESS AIR to work. However I have contacted the retailer and they sent me this message (Our supplier have watched the video and they said you didn't set the channel of the software. Please download the second sound file just as you did to ESS ONE) Unfortunately this makes no sense to me as I cant find a secondary download file. So I was hopping you new what they mean. Regards George.
Sorry, we don't have the unit and the video is all the record we have. Best of luck!
Can i record messages on it? Flying up to dogowners telling them to pick up after the dog....
+petfrogg The aux sounds look like they can be anything but the engine sounds are specially formatted so that the noise of the engine can be created 'on-the-go' from the device itself..
+Painless360 hm... then at least I can fool my neighbors if i make my quad sound like a lawnmower
Will these work on a multi-rotor?
No idea. What would they use as the speaker?
Good question…..need to chew on that…..
in my module the gun in aux channel don't work. why?
Happy to help but please watch czcams.com/video/olIqTiSJHIY/video.html and come back to me with more detail of what you've tried..
I think the output sound is too soft for use on aircraft...
+Sam AdvanES You've tried it?
Oh yes, I have a set. It is hopeless as compared to MrRC Sound V4.1!!! My honest, unbiased opinion is, don't waste your money on it! Pay extra more to get the whole lot better one...