NEW CR18P Evo Pro!!! overview, mods, and tricks!
Vložit
- čas přidán 15. 07. 2024
- I'm happy to announce Munkee RC has a new CR18P EVO PRO!!! I'll go through a few things on the rig as well as mods, tips I've done so far! winter competition is ahead and I'll be running this rig! like and subscribe for more RC content and to keep up with my shenanigans 🤪. thank you everyone for your love and support!
#rccrawler #rccrawl #hobbyplus #cr18p #cr18pevo #prolineracing #microcrawler #savox #cr18pevopro
Seriously, this is the single most useful video I've come across to help me become familiarised with my brushless Evo Pro. I'm new to crawling and it has been difficult to learn about the basics when many videos out there assume you already have a detailed knowledge about this hobby. Can't thank you enough!👍 I've already needed to replace the drive shafts [front broke] with metal replacements. I would like to know about the benefits of switching the drive shafts, if any. I tried it, but the front and rear wheels ended up turning in opposite directions, so I guess I'm doing something wrong. Thanks again!
@@Biolazard I'm glad I could help!!! So replacement of the driveshafts is going to help a ton and add weight. Lower weight is the key to a better crawling experience! 😉
So it sounds like you placed the driveshaft on the wrong output shaft, which is why your wheels are spinning opposite from the front. They put 2 output shafts on the transmission if you want to swap the rear differential to fight torque twist. ( The car lifting on one side) In order to do this you need a different rear axle that allows the differential gears to flip.
Great info. Thanks! May look to do this in the future. Currently looking at Cling On tyres and 1.3" beadlock wheels as my 2nd upgrade 👍😁
Nice, informative video, good tips, liked and subscribed, thanks. Love my Evo, can't wait to get to upgrading it.
This is the best and most thorough review. Great job. New sub.
Thank you Soo much!
I just got one, and so did my bud. Should arrive in a week: will be following to see what upgrades you so
Very good video with a lot of info! Thanks!
1st switch - Running Mode
UP- FWD/REV/BRK
DOWN- FWD/REV
2nd switch - Battery Type
UP- NiMH
DOWN- LIPO
3rd and 4th - Drag Brake
BOTH DOWN- 0%
3 DOWN and 4 UP- 50%
3 UP and 4 DOWN- 75%
BOTH UP- 100%
I have the Furitek version I just had it out with new Meus 1.2 wheels n tires awesome performance super heavy.
Like and subbed. Also I just got mine and its the brushless one. All the settings are via Bluetooth which is awesome. Better than tweaking everything on the transmitter. I recommend upgrading to the furitek when you can.
Thank you for the tip!
🦁Hakuna Matata! 😂😂
You mentioned using the TRX4m steering linkage? It works with no modification? Thanx...
Reminds me of a micro ascend
Pretty sure they offer the stock hex's in brass
Do you know any way to get more articulation? I feel like the shocks are very great but short. I have the brushless international version and it's been great stock so far
Do the injora brass high clearance links fit even though it says they are for the 4m?
I'm not sure I haven't switched the links yet. Just steering links from spare parts
This thing is perfect? Well, except the huge torque twist? Hobbyplus is proposing already a new rear axle turning to the opposite direction… increasing the bill quite a lot…
Check out some videos that show changing shock positions to decrease torque twist
@@MTDub99 thanks I will!
Bearings throughout or just bushings?
I believe its bushings
Bushings
How much run time are you getting
I haven't ran it dead yet. I do 20 min runs in the winter then switch rigs or come inside and put the battery on the charger. I ordered 600 mah battery packs for this that will double the run time
Where is micro rc club located? I’m over in northern Utah
We are located around the state of Utah but based in salt lake county. Feel free to join us on Facebook! We have tons of events and support for our crawling community
Whats the top speed on this thing?
It's 2 speed and upper gear it's pretty quick
Sorry, commenting as the video goes on, but its all metal gears throughout.
Jesus man save some hair for the rest of us.
Hahaha gotta let the mane out! 😂
your the Robert Baker of rc. you sound like him alot and have the hair.
www.youtube.com/@RobertBakerGuitar
Thanks man!