Mastering Overdrive with the Furitek FX118 and HobbyPlus CR-18P EVO-PRO: A Comprehensive Guide

Overdrive is perfect for small cars that you run in small areas!
It will:
* improve your turning Radius
* it will improve climbing
* descents will be easier to drive
In this VIdeo I try to explain everything you need to know to install and use the overdrive gears for the Furitek FX118! They can also be used in other CR-18P cars by HobbyPlus like the EVO-PRO I show in this Video!
Link to the Gears:
furitek.com/pr...
#hobbyplus #furitek #cr18p #evopro #cr-18pevo-pro #fx118 #scx24 #trx4m #microcrawler #overdrive #underdrive

[@rcklub]

Great instruction, thank you Daniel!

[@daniels_199]

I hope it helps some guys with less expierence

[@AllShadowFox]

I was wondering about overdrive on my way home today! Just ordered my evo pro a couple days ago, so the timing of this is impeccable! Thanks!

[@daniels_199]

You are welcome

[@wu_tal_rc]

Danke für deine ausführlichen Videos😃👍
Zwei Fragen hätte ich noch...
Passen die Injora Messing Felgen auf die Furitek Messing Radmitnehmer?
Und welches King Max Servo benutzt du?
Danke und Grüße

[@daniels_199]

I use the KingMax 1203 MD - I am not sure about the injora wheels! RC4WD BlackRhino even work with the Plstic Hex and a 1mm spacer

[@crawlingri]

Great explanation for people!

[@daniels_199]

Thank you!

[@ScimPeep]

Did you have any issues with gear backlash/wheel slop with sock gears? my CR18p has a lot of wheel play..... (wall, appart from the play in the hubs/wheelpin :))

[@daniels_199]

Yes it has a lot of slop - I got used to it!
But on one car I used super glue to mount the pins in the gears - redusicing slop a lot.

[@Casitascrawlers]

I’m about to have the same 2 crawlers I already have the Fury & I ordered the Evo Pro brushless version.

[@daniels_199]

Perfect Combo

[@sammyboswelldirtybrc7580]

Dan I was wondering if these would also work in the fms axles 🤔

[@daniels_199]

I don't know but would be surprised if they did

[@keldonator]

I've heard someone say something about the shaft inside the cr18 evo pro is longer than the shaft inside the fx118, is this true?

[@daniels_199]

Yes that shafts are extended by 5mm - I will change that back! Details in my unboxing video czcams.com/video/0KUm5KRxjGo/video.html