How to install G3P600
Vložit
- čas přidán 2. 07. 2024
- This video focuses on the installation of the G3P600, divided into a total of 8 steps. Click to know more: bit.ly/3zhy7dK
00:25 Step 1 Install the Feed Water Adapter
01:17 Step 2 Install the RO Faucet
01:37 Step 3 Install the Drain Saddle
02:11 Step 4 Position the RO System Housing
02:37 Step 5 Connet Tubing
03:37 Step 6 Connet Power Cord
04:02 Step 7 Install the Filter
04:02 Step 8 Start Up the System - Věda a technologie
Was interested until we realized that we have a duplex outlet which is split across two circuits. In this setup one outlet supplies 20 a circuit to dishwasher and the other supplies 15a to garbage disposal. This outlet in most houses is in an electrical box nailed to a 2x4 stud in the wall which is then covered verged with sheet rock. The base cabinet then sits in front of this wall with a cut out for the outlet and plumbing. To add an additional outlet would involve an electrician to add another box and repair the sheet rock. Perhaps a system for a house without two dedicated outlets for two specific appliances.