Waterdrop Under Sink G3 P800 DIY Installation

Sdílet
Vložit
  • čas přidán 4. 07. 2024
  • Waterdrop G3 P800 Reverse Osmosis Filtration System is designed for DIY installation.Please refer to the following instruction.
    Step1: Install the Feed Water Adapter
    Step2: Install the RO Faucet and UV Sterilizer
    Step3: Install the Drain Saddle
    Step4: Position the RO system Housing
    Step5: Connect Tubing
    Step6: Connect Power Cord
    Step7: Install the Filters
    Step8: Start up the System
    Waterdrop official website:bit.ly/3OS2gYg
    Amazon: bit.ly/3UwGeeE
    #bestwaterfilter #waterdrop #rosystem
  • Jak na to + styl

Komentáře • 2

  • @failednone6070
    @failednone6070 Před rokem +1

    Where does the MNR filter get Installed on the Waterdrop 800g with the UV System? Before the UV (so water feeds from the MN into the UV filter), or after the UV filter (so water would go from the UV filter then into the MN filter before coming out the faucet)????

  • @purplerose9041
    @purplerose9041 Před 2 měsíci

    Can I use my own faucet? I’d like to have a pull-down faucet in my kitchen.