How to - Jet Sled Wear Bar Install
Vložit
- čas přidán 3. 01. 2022
- #jetsled #wearbars
It was time to install these wear bars before this sleds hits some more parking lots with me in it.
Amazon Affiliate Link
Wear Bar Kit - amzn.to/3yLVv1V
Jet Sled- amzn.to/3H4QAfJ
SWB1: fits Jet Sled Jr, Kodiak Jr, Jet Sled SUV
SWB2: fits Jet Sled XL, Jet Sled Magnum& Kodiak XL
SWB3: fits Jet Sled 1, Jet Sled Mini Mag, & Kodiak 1 - Jak na to + styl
Very informative
Good tips here, I’ll have to install some wear bars to ensure my sled lasts a long time
It will save the sled and easier to pull
How about adding wheels to the back side as an upgrade ! Could it move easier in dry conditions? Just a suggestion I thought about it
Maybe, just adding the wear bars helps it a lot
How come the kit only comes with 3 bars when you need 4?
Depends on the brand, 3 is usually enough
I bought a jet sled for $29 tonight. No way I’m adding $39 wear bars 😂
Fair enough 😂
picked up the pelican version of the runners on amazon for $27. worked just fine. my last sled only lasted 2 years with moderate use before it wore thru in spots.
If you use a drill bit thats a 1/16 smaller the bolts will thread through the hole, and stay in place instead of falling out. More sturdy and more importantly you can flip the sled over with the bolts falling out and put the nuts on
Good tip!
if you really don't care to ever take it off (why would you) just JB weld it xD
Because it comes with hardware...