Tank Gearbox Restoration! (Tank Project)
Vložit
- čas přidán 23. 08. 2024
- Support the channel by downloading War Robots on your iOS/Android device for FREE bit.ly/WR_maste... and get an awesome starter pack!
Technical components: www.indi.nl
▼Click here for more!▼
Today we are continuing our Tank Project. This time we take a look at the gearbox of the tank, in what condition is it?
Behind the scenes & more?
Check out our 2nd channel: / werkplaatsvlog
Would you like to contribute? Check out our Patreon!
/ mastermilo
Follow us on:
Facebook: / mastermilo82
Instagram: / mastermilo82
Merchandise: shop.spreadshi...
Website: mastermilo.com/
Support het kanaal & Download War Robots GRATIS op jouw iOS/ Android toestel! bit.ly/WR_mastermilo82 Ontvang een geweldig starter pakket!
Should we spray the gearbox with some paint? Zullen we de versnellingsbak een lakje verf geven?
It should be painted pink. Do it for Dirk!
Zou het wel doen, zo mooi blank als-ie nu is blijft-ie vast niet...
YES...PLEASE PAINT IT!!! Just incredible work. I watched all of the daily workshop videos and this was a chore. One word of warning. I was watching a video put out by The Tank Museum in England and they restored a T-57 with the exact same steering and gear box and a very minor problem with the steering linkage caused the bare metal clutch plates to become so overheated they melted together during Tankfest 2019. It made me think of all the sanding and polishing of dozens of those metal clutch plates you did and how it all might be wasted by one little slip up in fine tuning the linkage. BE CAREFUL!!!!!!
Kijk hoe het origineel is. Is het origineel geverfd dan zou ik deze ook verven !
Paul ter Haar nah the tank needs to be profesional otherwise he maybe cant sell it
If everyone had such DiY skills like milo, the moon would already be inhabited by hobby astronauts
A Roll-Golf on the moon, that would be really funny :-D
Don't give milo ideas now...
The planet Mars too....but at the moon, Milo wants only go on the sunny side of it....the dark side are only for very strange people.....
@@divicio1 after the helicopter and the submarine, he will go for a spaceship....I think....
No doubt eh !
Master Milo is the only CZcamsr who's fun to watch even while he's plugging his sponsors.
too bad we dont understand what the hell theyre saying x.x
@@mattmathew6706 yeah i use those
* opens random part *
... a lot of rust ....
Emile: "Ah looks good!"
Those cogs at 4:46 are pretty darn tame compared to the other rusted parts they found, including the entire side of the engine with parts completely destroyed by rust.
They don’t really care about the rust, just whether the part is worn or there are teeth broken.
😂😂😂
As a french looking at an English subtitled Dutch serie about tank repair, I can tell you, what you're doing is amazing.
My little contribution : 12:18 I think, as well as gearing box, engine, tracks, the big gun might be a source of an uncomfortable noise. xD
bonjour ami francais!
Damn you just ruined it for me. I didn't know their were subtiltles and i've been watching it and laughing a lot, until now! :D
@@neilcowan535 you're welcome =)
une bonne série effectivement
The main gun. The elephant in the room.
Damn that pink forklift so gorgeous. I want one myself to lmao
on their 2nd channel they made a video painting it pink in vlog 100
I have the same one but its red😂
@@parkeerwacht why? Any reason to paint it pink?
@@kitecattestecke2303 Running joke. They joke that Dirk likes pink because his old golf was faded red which started looking pink. People started suggesting that they should paint the forklift pink so Dirk would drive it more and they did that to celebrate their 100 wp-vlog.
"Heftrut" instead of "heftruck", heerlijk 😉
I will watch this until I speak dutch fluently :D
Top dat je weer kijkt ;)
vloeiend spreken gaat het best met bier
veel succes makker zullen we even oefenen? (translate that :P)
De taal leer je horizontaal!
ik hou van je , is the only thing I remember, my ex gf was dutch :D
Greetings from America to all my Dutch friends I love you guys keep up the great work.
Ik wil gewoon even zeggen dat ik zoveel respect heb voor jou. Ik leer hier meer van dan een techniek les. Respect.
I was introduced to your videos by a friend of mine i am amazed at the quick progress of your restoration of the tank! Love the work you and your friends have done very inspirational! Ive been a automotive mechanic for 25 years and its not just a job it's a passion as well your doing one of my bucket list that i would love to get my hands on to restore a military tank of any kind! I live in the United State's and to find something anything remotely close to a tank would be a Bradley troop transport that i could pick up for cheap is in Texas military salvage yard thinking hard on it! But all in all keep up the great work and thank you for the videos keep them coming!! Peace out brothers!!!
That forklift needs a Hello Kitty sticker or two, just to top it off. :-)
Yes ! in fact he should paint the tank in full Kitty liverage too :-)
the pink forklift brings out your eyes milo! keep up the good work
Thank you to those who translates! This was one of the better translations!
Theo S when you look to the other vlog s you can see the translation guys 👍
Just be glad you didn't have a broken gear somewhere, forcing you to press apart a gear stack! Great work.
So looking forward to the completion :)
Wow! You have made a big change from a guy who making funny videos by building and welding funny things to a professional restaurator! I´m impressed!
versnellingsbak we are learning slowly
Greetings from California USA, love your channel as I write this we’re I live is on FIRE as all of Southern California seems to be. Great to see you guys restoring this historic tank. All the best!!!
One of the coolest channels on CZcams!
..but please guys! Safety! Parts washer with no gloves? Grinding/polishing without respirators? Neither is healthy for you in the long run. ;)
Gwlyddyn the parts cleaner is just diesel no filthy chemicals
@@jochemhoogantink8075 Diesel is still far from healthy for your skin. :)
Gwlyddyn as long as they regularly wash their hand with the workshop soap from indi it should be fine since there are skin care products in most kinds
Great job, thanks for the English subtitles
Can’t get enough of this Milo! I’m learning so much about mechanics too
What a beautiful gearbox - this is tank class stuff! Imagine putting this in a car - it would never ever break 😂 I admire Milo and his “side kick” and all the other guys that show up! I’m watching from southern Sweden 🤟🏻
Love your videos great hard work in this tank i enjoy the tank project ..i am From saudi arabia i am subscribed from while now in your great channel i wish you complete this project asap
Gaaf die versnellingsbak. Is echt een heel basaal voorbeeld van hoe dat werkt. Tnx voor de uitleg!
Saludos Master-Milo desde México, me gusta mucho el proyecto que está realizando.
My favourite part of this is the audio and the special sound effects! Keep up the good work!
thanks milo for this series. it's very interesting to watch. Greetings from finland!!!
Ik heb een suggestie voor de volgende nutteloze experimenten. Water in de motor gieten en tegelijkertijd terugschakelen naar de eerste versnelling op hoge snelheid.
Ultimate carnage
You need to get a sand blaster, it would make these resto-jobs so much easier (at least when it comes to de-rusting the engine, gearbox casing, body, etc)
Respect hoor dat jullie dit aandurven en ook daadwerkelijk doen 👍🏻
Grande trabalho! Saudações do Brasil!
Gotta love the pink forklift.
Really loving this series.
You guys are AMAZING mechanics.
Holy shit, that's a hell of a set of gears. The power handling capability must be incredible.
Good old instant gasket still being used, used to get through gallons of the stuff back in the 60's trying to keep a British bike oil tight.
Ziet er nog goed uit (6:50) na zoveel jaren!
Ik was bang dat ze droog hadden gestaan en daardoor helemaal vast zou zitten.
Je hebt behoorlijk geluk hier want die tandwielen vervangen was extreem duur geweest
En schuine vertanding is minder efficient (11:36)
Sometimes i watch youtube-vids and think. Damn i wane do this too. But nope, not interested in Tank restauration :-) I am glad that i can watch this out of the comfort of my living room :-) Great work!
Wow. Wat een grote versnellingsbak. Mooie video !!
This work requires patience
Just sat here wondering if that gearbox will fit in my mini, or if the mini would fit in the gearbox! And still loving the forklift Lol 😂
Milo I hope you were kidding about that rusted bearing being like new. Replace it or you will just have to in the near future!
Goed bezig weer! Is echt heel mooi geworden, versnellingsbak is weel als nieuw
NOOOOO, *DON'T* put the seized bearing back in. Even though it turns again, it's no longer good. Good bearings cost as little as 2,50€ so there is no reason not to replace it.
@chibikong I noticed that, but they cleaned the bearing like they wanted to put it back in.
Are you really tryna tell these guys how to do their job? Get real haha
@@madkills10 pull that stick out of your ass...
I agreed, thats for sure!!
I noticed that to.. i was suprised they not seem to replace any bearings at all...concern all the job it was to take it down why not replace all old bearings with new ones ?
Thx. I can see big big module.
Great work Guys. Thanks for sharing. (Birmingham UK)
Straight cut gear are stronger in terms of what theyll take,slanted teeth engage smoother, its for consumer comfort.
I am really enjoying this build, also a shop is not complete without a dog.
danke fur das video es ist super gut
Fantastic job
Man man man een industrieel ingenieur is er niets tegen, tegen deze tankbouwers. Milo jij bent praktisch een mechanisch genie. Jij pakt alles aan alsof het niets is.
молодцы чуваки!Наши люди,и газом умеют работать,и кувалдой!Уважуха!
master milo with pink forklift is like superman with skirt...
Yes ik heb herfstvakantie en wat doe je als 1e....natuurlijk Mastermilo kijken😀 duimpje als je ook gaat kijken👍🏻
Wow.... U actually revived it. Impressive
Amazing really - the gearbox has been sat full of water, neglected, abused... and yet all it needed was a clean up and reassembly, No replacement parts needed.
Russell Gowers Mother Russia engenerink iz stronk
@@xavierrajda933 China did the assembly, the engineering (design) was done in russia.
Om een of andere reden vind ik het altijd heel grappig hoe jij die games aanprijst.
Daar kan Gaston nog wat van leren ,😄, en Gaston wat zijn de prijzen? Nou 400000 zilver.........
Looking good keep it up.
You are a master so you picked the right name.
I discovered that if you use a knife instead of a chisel to start the separation between two flanges, it helps to eliminate damage to the gasket surfaces. This is a great video series and extremely interesting to say the least. Keep up the great work!
i'm looking forward to see this tank completed! keep on guys!!
Судя по разговорах - немцы наверное.
Молодцы, крутой проект!
Привет из Киева! ))
Голланды. Эмиль живет в Барле-Нассау, Дирк, наверно, тоже.
Bas werkt nu gewoon mee! 17:30
Die tank versnellingsbak is net zo groot als een hele Zoefzuki Alto 🙈 🤪
Thanks translation staff ❤️
build escalator ladder for your workshop next. :D
You guys are doing some fine fucking work
my dutch words of the day, khalopelage = bearings, versnellingsbak = transmission and HOOPPAA! = there you go. in this speed I will be able to speak Dutch fluently before the tank is finished!
Pulls down entire box to realise it was one seized bearing probably accessible from the outside then proceeds to scrub the housing but doesn't replace seized bearing. Transmission Mechanics 101
Good Job!!!! And Nice Skills, Greetings from Portugal!!! =)
I want to work for Milo. This is such a cool channel.
Ah, net 15 seconden geüpload. Perfect getimed dacht ik!
1050 mensen per minuut geken tot nu toe...dat gaat MASTERRRRR
Good job
Sick project! Amazing job!
I believe the tank used a straight cut gear for the torque it needs because of how massive and heavy it is.
Dit is toch geweldig.
Young Men! I would like to suggest wearing latex gloves while in grease and particularly Your parts cleaning tank. You are absorbing nasties through Your skin without glove protection. Love Your due diligence and masterful mechanical miracles!! Thank You both!!
All strait cut gears in that box. Must have made one heck of a noise running.
Hello Master Millo ,a question I seen this gear box have drive a air compressor for start the engine ,what pressure work tha air for start the engine? ...thank ...and congratulations for that job ..from Uruguay
Milo verkoopt al die niet echt bijzonder uitziende spellen wel mooi XD
You didn't have to time the gears? Normally in big rig transmissions you need to time them and check gear lash
Ha he was cheesing getting a couple shots of the pink forklift,looks tight in the workshop when it's spread all over the floor good job tho it was educational
That was an excellent video. You do great work. I would get sooo much more out of it if I spoke your language. Do you have an english translation channel?
Captain Hotrod turn on English subtitles, they have a generous team doing translations for them.
Мужики молодцы и танк красавчик!
YEE boi! Gearbox ! Look at this monstrosity !
I've got a gear from a crashed German Ju88 bomber that looks exactly like the gear that runs the compressor and fan drive on this gearbox.
bizar interessant dit, alleen ik vraag me af tot hoeveel bar die compressor zou gaan en hoeveel bar er dus op de flessen komt te staan. Want ik heb het gevoel dat je wel wat luchtdruk nodig heb om het motorblok te starten.
50 Bar. Laten we maar hopen dat de flessen niet van binnenuit zijn doorgeroest. Kon nog wel eens een harde klap geven als die kapot gaan.....
Like the music from Sick Puppy 4x4 around the 14 minute mark
Hey gasten, waarom gebruiken jullie geen lucht sleutel en straal cabine voor dit soort dingen? Gr Sjoerd. Keep up the good work!
Good news the gear box is good!
I'm curious. How much will the tank be worth after it's finished.
Compared to how much work has gone into it? Loving this series btw!
Hey lets hammer on aluminum sealing surfaces. Geez guys, a little finesse. Howd you break a boss? And did you tear down the gear shafts and inspect them?
How do you even keep things organized in order to put them back together afterwards? There are thousands of parts!
Keep going, here since super! My daughter loves Dirk! :-)
De "in de achteruit maakt een ander geluid" theorie heb ik vandaag uitgetest en het klopt. Oftewel, nooit twijfelen aan milo.
I reckon I could use that gearbox on my Quad Bike !
I need something that will handle 12 Rampant Ponies.
At the rate that you completing this tank, you need to consider what the next project will be. RollTank maybe?
Or a tank with a different kind of engine; 2nd hand m1 Abrams.
Dommage je comprends pas grand chose mais ça a l’air sympa
What kind of degreaser is in that parts cleaner? Is it safe for your skin?
cant wait for next video