Part 2 - Mounting Projectors Using Reference Points
Vložit
- čas přidán 20. 04. 2016
- Check out the selection of upgrades for your vehicle at www.lightwerkz.net
Lightwerkz specializes in custom automotive lighting upgrades for all makes and models. We offer the best brands in custom automotive lighting and also offer services to customers all around the world.
Contact us today for additional information.
Phone: 201-644-0337
Email: info@lightwerkz.net
Follow us on social media!
Facebook: / lightwerkz
Instagram: / lightwerkz - Auta a dopravní prostředky
Looks like I have to cut the bulb holder for my 8th gen Civic even with the threaded shaft projector!
thanks for the info
I'm assuming this isn't as important if you're doing bi-xenons and don't use a separate high beam?
To some degree - yes. You still want to get the projector mounted in the same height/angle as the original low beam area.
how do you align the projector straight before doing the holes in the reflector bowl ?
Just comes down to experience basically. You first open up the hole and recess the projector all the way back until it hits reflector. Mark out the four points and then drill right through. We do have templates now for each projector though so its a little easier.