I already wrote a thesis, a dissertation and I'm currently working on a book manuscript. Every time I need to do this I go back to this video. Thank you so much. This is so helpful, you have no idea.
i have been looking to insert chapter (word) before numbering for a few years now. Thank you so much Dr Yes, this tutorial is for greater good for life long students. Thank you so much for making it.
Access the full course, "How to format your PhD thesis using Microsoft Word" here: courses.phd.academy/p/how-to-format-your-phd-thesis-using-microsoft-word-windows Unfortunately I can't give specific formatting tips through the comments here- it sometimes takes a lot of work to figure out solutions to these issues!
thank you very much, i have been having a lot of trouble lately with this one, and had to manually write them until i found you video... again thank you very much.
Wonderful! Thanks, works very well, I was struggling with this for sometime as I was selecting the multi-level numbering option that's just above the option you showed.
Thanks for the video! However, when I apply this the font automatically changes to calibri, even though I have a different font in the document before following the steps. Any recommendations for making the heading font standard? Is the page brake between chapters automatic? It does not happen in my document.
Thank you so much for the video. Is it possible to have continuous numbering for all the levels from the beginning of the document/report to the end (irrespective of the headings/level).
Brilliant. is there a way to repeat chapter and section names in the footer? I have figured one for chapters but havent' been able to do one for sections where by it would place it if it only exists in that chapter
if i am working by seprate chapters .means evry chapter is a seprate word file how do i get the numbering right ? because i didn't find where to set the chapter's number from the start
How to list the main heading one as CHAPTER ONE: INTRODUCTION , but the remaining sections as 1.1 Introduction? Everytime I try it, it becomes One.1 Introduction
Hi, i love ur video. It is a grt help for me. But is there any way by the help of which I can specify my chapter [heading 1] , heading2 and heading 3 as CHAPTER ONE, 1.1, 1.1.1 respectively. I have found a way that help me to write heading 1 as CHAPTER One but what I need is the Capital letter ONE bcz it is mandatory in our college thesis. Quick reply will be of great help
I have a slight problem. When I number the first chapter, the subsections or the next chapters do not get numbered automatically. It just adds '1.' as a prefix to the first chapter. That's it.
I already wrote a thesis, a dissertation and I'm currently working on a book manuscript. Every time I need to do this I go back to this video. Thank you so much. This is so helpful, you have no idea.
I saw several videos and they just confused me, while your explanation here is clear and simple to understand! Many thanks!
i have been looking to insert chapter (word) before numbering for a few years now. Thank you so much Dr Yes, this tutorial is for greater good for life long students. Thank you so much for making it.
bro you are a godsend. after an hour of fiddling with word settings, all i needed to do was watch this one video. THANK YOU!
That was literally THE BEST video on the topic. Kudos and many many thanks for this immensely helpful video.
Cheers for this video, James! I'm submitting in two months and was planning on doing this manually but you've saved me the potential nuisance!
Years I have been struggling with tables of contents. Finally a brief video that explains it so simply. Thanks!
Glad it helped!
If I hadn't watched this video, I would've done my Thesis Table of Content manually. Thank you so much.
Thanks a million!!! I've struggling with this for weeks. Now I can submit my thesis:)
I will never forget you James.
Project due tomorrow and you saved my life!! 🙏
THANK YOU 💯
Thanks within the first step my thesis automatically populated the numbering. Thanks a bunch I was struggling for hours before I found your video.
Access the full course, "How to format your PhD thesis using Microsoft Word" here:
courses.phd.academy/p/how-to-format-your-phd-thesis-using-microsoft-word-windows
Unfortunately I can't give specific formatting tips through the comments here- it sometimes takes a lot of work to figure out solutions to these issues!
០០
After wasting a lot of time finally i got the right video. Thanks a million
I wanna know who are the ones that disliked this video! This video saved me hours, days before the deadline of my thesis! Thank you very much.
Very Concise and 10000% on point. This is a life saver seriously
Thank you so much!!!!! I was under the impression I had to do this manually, life saver.
Literally saved my life about to throw laptop out window before dissertation deadline...
Hhh
Same here :)
same dawg
😂😂
thank you very much, i have been having a lot of trouble lately with this one, and had to manually write them until i found you video... again thank you very much.
I had major problems figuring this out for my thesis. Thanks so much!
Wonderful! Thanks, works very well, I was struggling with this for sometime as I was selecting the multi-level numbering option that's just above the option you showed.
I was stuck for past 3 days trying various videos method but this one at last helped me. Thank you so much man!
Glad I could help!
Thank you!, Word F1 help was unclear, but this short tutorial effectively clarified my doubts, much appreciated
Thank you! This has been driving me nuts for years!
This is what I got after searching about an hour. Thank You.
Thesis had too many indents within chapters and did not want to number the entire thing. This helped!!
When I add a new chapter and activate the 'heading 1' style, it does not automatically break into a new page.
Thank you soo much! Spent hours trying to figure out how to do this
Man this actually fixed everything! Thanks so much!
Thanks for helping out with my PhD thesis..
very clear, short and precise, Thank you very much sir!
Thanks for the video! However, when I apply this the font automatically changes to calibri, even though I have a different font in the document before following the steps. Any recommendations for making the heading font standard?
Is the page brake between chapters automatic? It does not happen in my document.
Thank you so much for the video. Is it possible to have continuous numbering for all the levels from the beginning of the document/report to the end (irrespective of the headings/level).
Thank You so much!
But, how dido You manage to automatically configure Heading 1 to start on a new page.
Thank you Sir. May God bless you and your family!
Thank you I was looking for this. Your lectures are amazing thanks 🙏
Thank you so much sir. So simply defined and so well. Thank you, Thank you.....
Thank you very much for this. I was just started my dissertation and I guess this save lots of time from me
This is life saving. Thanks a lot 👍
That's you so much . The way you simplified is so awesome
Brilliant.
is there a way to repeat chapter and section names in the footer? I have figured one for chapters but havent' been able to do one for sections where by it would place it if it only exists in that chapter
Many thanks for the tutorial. It was really helpful.
Thank you so much it helped me a lot. I was looking for this a
few hours.
Thanks a lot Dr James.
So simple, but powerful.
What a great job.
You're the best.
u completed my work thanks for saving my time
Thank you very much. This helps ALOT! How do you change the number "1" to the word "one"?
Thanks, James Hayton, your video is very helpul to me!
thank you so much!!! now i can continue and write my thesis properly
Thank you so much James! You solved my problem.
i am facing problem. in heading 1 i always get chapter 1, it couldn't change into chapter 2 or rest. how can i overcome the troubles.help plz
This is such a helpful and well done video. Thanks so much.
thank for your video: short and worth for every seconds. Not like other tutorial video - very long and wasting time!
exactly what I have been trying to solve. Thank you!
This is exactly what I needed thank you VERY much! Swanson out.
Thank you Professor, this was very helpful....
After inserting chapter 2 how to insert numbering lik 2.1, 2.2, etc? for me it is continued like 1.7, 1.8 (chapter 2). Where did i go wrong?
if i am working by seprate chapters .means evry chapter is a seprate word file how do i get the numbering right ?
because i didn't find where to set the chapter's number from the start
well explained. Thanks for the useful information
hey sir, can i ask how to link heading 1 (as chapter ONE not chapter 1) to heading 2 (as 1.1) ??
How to list the main heading one as CHAPTER ONE: INTRODUCTION , but the remaining sections as 1.1 Introduction?
Everytime I try it, it becomes One.1 Introduction
Greate video. Is there a possibility that you can share how to format equations? Especially the line spaces between them.
If one has to copy a paragraph from another document and paste it after section 1.1 and number the newly copied paragraph as 1.2, how can it be done?
Lets say i ve chapter 1,2,3 and lastly reference. How do i set the reference heading without it follow previous chapt?
thanks Dr. Hayton. Really appreciate it.
Why is the change in multilevel listing in Chapter 1 continuing to Chapter two?
Thanks for the help! Got exactly what I came here for.
Hi, i love ur video. It is a grt help for me. But is there any way by the help of which I can specify my chapter [heading 1] , heading2 and heading 3 as CHAPTER ONE, 1.1, 1.1.1 respectively. I have found a way that help me to write heading 1 as CHAPTER One but what I need is the Capital letter ONE bcz it is mandatory in our college thesis. Quick reply will be of great help
Very well explained, thank you.
Thank you!! Exactly what I needed
You are really great!!!! Thank you Dr. James HAYTON :)))
Sir I want to know that how to bracket both sides of roman numbering ?
thank you so much. this is exactly what i needed
Just saved my life! Thank you!
Great Video. Someone make this man a statue. To you, my laptop's life is forever indebted
An excellent short video really helpful, Word is so awkward, buggy and thinks for itself too much when working with on large documents like a thesis.
Hi, i have try this but the heading two shows no heading number
Thank you very much, this is really so helpful. hope you do more videos like this. =)
Thanks James; a lot of respect, prayers, best wishes
This was very helpful..Thank you
why the heading style on the top always go back to previous mode?
Clear and concise...Thank you
Thank you so much for tutorials
Thank you so much. It was super helpful.
Thanks easy, clear and faster!
thank a million. You solved my problem. great job.
Thank you... Its really a very useful vedio 😊
Thanks dude that was really helpful
Thank you very much. Really helpful.
Thank you! It helped me a lot!
I was going nuts. you sorted me out.
Excellent video you save my time
I have a slight problem.
When I number the first chapter, the subsections or the next chapters do not get numbered automatically. It just adds '1.' as a prefix to the first chapter. That's it.
I have the same problem, if you found solution, please let me know
Very helpful! Thank you!
Thanks very much for your efforts.
Thank you so much for uploading this.
Thank you very much, very informative. I done as you told, succeeded.👍
Thank you very much, it was very helpfull
Why it didn't work ? Does it have to be
Heading 7 selected first or what ?
Great help!! Many thanks!!
Thank you so much for the information