23 CanAm Outlander 850 XMR Solo Rip!!
Vložit
- čas přidán 29. 04. 2023
- On this episode I Head to Lake Murray Atv Park for a solo Rip!!!! I get my first Ride with the 850 XMR. I give you all my first hand experience with the 850 XMR. That has 11 hours on it.
- Auta a dopravní prostředky
That winch on the back is badass, good looking rig!
The tiger tail comes in handy when someone just needs a bump to get out or even a tow back to camp
I hope you adjusted your linkage by now.
Awesome bike !
I did!
If you don't mind me asking, where'd you get your hand guards from?
They are CanAm I got them from my local dealer.
Im looking at one also,does yours come with the new intelligent brake control ,or is that only on the 24, don't like the red,but i can dig the black and tan
No mine is an early 23 and didn’t come with the intelligent brake control.
@@Story53s okay,I thought since it had the new head lights it would have
So my 23 850 XT owner manual doesn't show it,,, how did you get RPM to be displayed?. Nice riding
My 2024 shows the rpms.
Didn't turn anything on.
Not sure on the XT if the screen is the same. But if so it should be a combination of the two buttons on the hump and the button on the left handle bar.
Nice trails!!!
Yes they are it’s always nice to find a new place to ride.
Your shifter arms need adjustment , my outlander 850 drives me crazy with all the noises it makes.. I hear yours is the same!
Yes I need to adjust it. Most of the noises are the clutches. That gets magnified when you have snorkels like I have on the 1000. Thanks for watching and commenting.
What is that I see where your 2 inch receiver is?
It’s called a tiger tail. It’s a retractable tow rope. It’s probably one of the best if not the best accessory I have.
Can u do a video on how u clean your atvs would be great 👍🏽
I have some clips of me washing. I’ll see about throwing them into a video.
It's an xmr it's snorkeld
The only think on a outlander xmr that is snorkeled is the belt intake and exhaust. The air intake is the same height and location as a non XMR.
@@Story53s air intake is on a non. Xmr is at the same level as the rack on an xmr it at about half the dash
@@RicardoHernande I can assure you that the air intake on a xmr outlander and a non xmr outlander are the same height. They are both under the instrument pod. Belt intake on XMR is part of the rad relocate. On a non Xmr it is on the left side on instrument pod. The belt exhaust on a xmr loops on the left side of the instrument pod and then back down to blow on exhaust. Non xmr models belt exhaust is left side under seat and blows on exhaust.