- 116
- 125 275
Diamond S MotorSports
United States
Registrace 22. 04. 2013
This Channel is everything with a Motor that I own. From my 2011 F350 6.7 Powerstroke all the way down to my Daughter Power wheels Jeep. The main focus points will be my 2011 F350 and riding ATVs. This channel will show me riding modifying and fixing everything myself unless it is way over my head. The line up of machines is broad in age. Starting with a 84 Suzuki 185, 06 700 Sportsman, 17 Can-am Outlander 1000 XTP, and a 23 Can-am Outlander 850 XMR. NEW to the line up is a 24 Can Am Defender Limited Max. So have a seat get comfortable and enjoy the Content.
TAILGATE ASSIST FOR 99-16 SUPER DUTY!!! Intech Auto How To and Review.
In Refreshing Project Bruiser I decided to add the Intech Auto Tail gate assist. The directions are trash but with my help you can follow along with me and know what to do. I purchased this kit off amazon here is a link to it if you interested. a.co/d/8trKS8t
zhlédnutí: 66
Video
Stop a Thief From Stealing your Tail Gate!!!!! 98-16 F SERIES TRUCKS
zhlédnutí 10Před měsícem
As many of us truck owners know people like the Steal our Tailgates. Especially the tailgates with the step built into them. This little $40 accessory can Save you thousands of dollars!! I picked this up on Amazon. a.co/d/4EVqFgQ Get this bad boy and save your Tailgates from a sticky fingered thief!!
How to Quickly Change a 17 Expedition Rear AC Blend Doors!
zhlédnutí 585Před 3 měsíci
In this Episode I show you how to Quickly Change the rear Blend Doors on a 17 Ford Expedition. Part Numbers 1L2H-19E616-BB
23 850 6 Month Review 10 Months Late !!!
zhlédnutí 284Před 3 měsíci
This one is from 10 months ago. Life got in the way and I just go around to editing this video. You will have to excuse the rough editing. Im working on getting back into it. I am also using a new software. Please like Subscribe and Comment.
LED Fog Lamp Upgrade for Fab Four Bumper
zhlédnutí 60Před 8 měsíci
Upgrading the Fog Lamps on my Fab Four bumper to a fully LED Housing. no More H11 LED bulbs in a incandescent fixture.
Replacing Tie Rod On A 2011 F350 4X4
zhlédnutí 161Před 9 měsíci
In This video I found some play in my Steering on my F350. I find the problem and show you how you can Diagnose this issue. I also replace the parts causing my problem. This Could Have been a Total disaster if I had not adressed it when I did.
850 XMR Takes On Thick Mud at Lake Murray
zhlédnutí 569Před 9 měsíci
This Video is a continuation of my last video at Lake Murray. I am on the 23 850 XMR and by myself. Its evident that its dry the holes are drying up and the mud is Thick. Watch and see if the 850 can make it through the Thick Mud.
Lake Murray Solo Rip 2 With the 850 XMR Pt 1
zhlédnutí 258Před 10 měsíci
Got the 850 Back From having the output shaft oil seal replaced under Warranty. Decided to head over to Lake Murray for a quick Day Rip. PT 1 more to Follow.
2017 Ford Expedition Gets New Brake Pads & Rotors
zhlédnutí 211Před 10 měsíci
In this Video I Change the Brake Pads And Rotors on my Wife's 17 Ford Expedition. I decide to go with the Power Stop K5577-36 Front and Rear Z36 Truck& Tow Brake Kit. I got this kit off of Amazon. I also Decided to change out the lug nuts. The Stock Lug nuts have a Chrome Cap over the actual nut. the Cap Swells Causing sockets to not fit. I also got these off Amazon. They are A solid lug nut th...
Replacing Front Left Axle On a 17 CanAm Outlander 1000 XTP
zhlédnutí 331Před rokem
Replacing Front Left Axle On a 17 CanAm Outlander 1000 XTP
23 850 XMR Stock VS 17 1000XTP on 33" XM310s Spring Break Pt3 At River Run ATV Park!!!
zhlédnutí 611Před rokem
23 850 XMR Stock VS 17 1000XTP on 33" XM310s Spring Break Pt3 At River Run ATV Park!!!
Stock 23 850 XMR goes Hole 4 Hole W/ Outlander 1000 and Monster 850 Highlifter!!Spring Break 23 Pt.2
zhlédnutí 327Před rokem
Stock 23 850 XMR goes Hole 4 Hole W/ Outlander 1000 and Monster 850 Highlifter!!Spring Break 23 Pt.2
SPRING BREAK 23 DAY 1 PT 1 at River Run ATV Park
zhlédnutí 527Před rokem
SPRING BREAK 23 DAY 1 PT 1 at River Run ATV Park
23 850 Outlander XMR Axle Boot Replacement!!
zhlédnutí 641Před rokem
23 850 Outlander XMR Axle Boot Replacement!!
Pulling Rear Axle on A Can Am Outlander to replace a Axle Boot
zhlédnutí 1,8KPřed rokem
Pulling Rear Axle on A Can Am Outlander to replace a Axle Boot
Fixing My 2017 CanAm Outlander 1000R Misfire issue!!
zhlédnutí 161Před rokem
Fixing My 2017 CanAm Outlander 1000R Misfire issue!!
Pt 6 We Are Lost Looking for The Beach at Lake Murray ATV Park!
zhlédnutí 525Před rokem
Pt 6 We Are Lost Looking for The Beach at Lake Murray ATV Park!
PT5 Lake Murray Trying to Find the Beach!!!
zhlédnutí 286Před rokem
PT5 Lake Murray Trying to Find the Beach!!!
Pt 4 First time at Lake Murray ATV Park!! The Wife Goes Deep.
zhlédnutí 922Před rokem
Pt 4 First time at Lake Murray ATV Park!! The Wife Goes Deep.
Pt.3 Lake Murray ATV Park First Time Ride!! Does the 1000 Make it Out on its Own Power?
zhlédnutí 986Před rokem
Pt.3 Lake Murray ATV Park First Time Ride!! Does the 1000 Make it Out on its Own Power?
Lake Murray ATV Park Pt 2 Outlander 1000 hurt!!! but Still Going Hole For Hole With the Highlifter!!
zhlédnutí 729Před rokem
Lake Murray ATV Park Pt 2 Outlander 1000 hurt!!! but Still Going Hole For Hole With the Highlifter!!
Changing Battery Terminals on 7.3 Powerstroke New Batteries on The 11 6.7 Powerstroke!!
zhlédnutí 783Před rokem
Changing Battery Terminals on 7.3 Powerstroke New Batteries on The 11 6.7 Powerstroke!!
First Time At Lake Murray ATV PARK Pt1
zhlédnutí 2,6KPřed rokem
First Time At Lake Murray ATV PARK Pt1
What kind of gas you run in your outlander
I run 87 or 93
I’m still not understanding how to get the nutsert to tighten. I’ve been trying for 30 minutes
It will never get completely tight. You just have to go far enough for it to sandwich itself in the hole. They say the nine complete turns cause that’s how many revolutions it takes for it to sandwich down.
Get a driver upgrade so the engine will last longer.
lol I don’t think I was driving it hard enough!!
Thank you. Super helpful!!
No problem thanks for watching!
Where did you buy the 2023 Can am???
This one I picked up at Antlers Motorsports in Antlers Oklahoma.
Did you reset the oil life maintenance that pops up on the dash when it’s ready for an oil change?
No I didn’t. Because I did this at 10hrs. I typically change my oil more on my machines than the recommended. So I did it at 10 the next one will be at 50hrs then I will change it at every 50hrs. I also check my oil before every ride. If it starts getting dark I’ll change it.
I appreciate the video ! ..........keep it coming, I liked and subscribed also :-)
Thank you for watching and subscribing.
This video helped me out. Liked and subscribed. Thanks man!
Thank you for watching!!!
Im looking at one also,does yours come with the new intelligent brake control ,or is that only on the 24, don't like the red,but i can dig the black and tan
No mine is an early 23 and didn’t come with the intelligent brake control.
@@Story53s okay,I thought since it had the new head lights it would have
That winch on the back is badass, good looking rig!
The tiger tail comes in handy when someone just needs a bump to get out or even a tow back to camp
You took too many parts off lol. You just have to remove 4 plastics push clips to remove oil filter😂
To each their own.
I hope you adjusted your linkage by now. Awesome bike !
I did!
What bushing kit did you buy?
Warranty killer has a kit and so does MrRpM
That quad sitting outside baking in that texas sun is going to melt away your balls when you sit down on the seat.😮😂😅
Tell me about it
Would have been great to see how the clips can be removed to detache the plastic fenders from floor board.
Are you talking about the floor boards or inner fender liners?
Inner fenders
So my 23 850 XT owner manual doesn't show it,,, how did you get RPM to be displayed?. Nice riding
My 2024 shows the rpms. Didn't turn anything on.
Not sure on the XT if the screen is the same. But if so it should be a combination of the two buttons on the hump and the button on the left handle bar.
1st service is due at 50hrs on the 850 not 10.
You’re right but it never hurts to change it. Also on the older models it was 10 hours. To each their own!
Thank you Sir
Most welcome
Thank you!
You're welcome!
If you don't mind me asking, where'd you get your hand guards from?
They are CanAm I got them from my local dealer.
Put some brake fluid in your jack fluid it will swell the seals and make it stop leaking
I’ll have to try that. Thanks for the suggestion and for watching!!!
Where did you get that piece that hold your snorkel?
That is a Triangle ATV snorkel kit for a XMR that I modified to fit my XTP.
Is the 1000 power worth getting new and having to snorkel, rad relocate or is the 850 xmr right there with it?
Depending on what kind of riding buying a 1000 xt snorkeling in and just putting the CanAm rad kit is worth it. Especially you go with an earlier year model say a 17-18 that still has the throttle by cable. It’s way more responsive. Through clutches on and it becomes even more of an animal.
Also I see you have the 1000 xtp and xmr 850. That’s what I’m stuck between getting. Is the power that noticeable to where it’s worth getting a xtp 1000 and snorkeling or is the 850 the best move?
If you are looking for a mud machine. Out of the box you can’t beat the 850. I love my 1000 XTP but when in it comes to mud and deep mud the radiator becomes a problem on the XTP. The 1000 has more down low power 850 is more mid range. Thanks for Watching.
Is this South Carolina lake Murray? I didn’t know there was riding that way or do you just have to know the trails? I’m in clover sc beside rock hill
It is in Oklahoma.
looks like you can do the oil change without removing the fender. another reason why i liked my renegade but my outlander is better lol
Yes you can. I do it this way so I can get to the gearbox as well look the machine over good. Thanks for watching!!
What is that rope winder?
It’s a KFI Tiger tail. It’s one of the best accessories I have.
Liked and subscribed
Thank you!!
I’m buying my first ATV ever a the age of 60 to take the grandkids for rides out at the cabin. It’s a 2023 Outlander XT-P 850. I’ve been watching some videos and cannot believe how much there is to change the oil. What does a dealer charge on an average at a dealership?
I have no idea what a dealer charges. I have always changed my own oil. It allows me to look over the machine for anything out of the ordinary.
I subscribed right after the Polaris joke! Lol
Lol Thanks for Watching!!
I am totally new to this world of can ams, I have an xmr 1000 2016, what would you recommend I do or check to make it work perfectly, and another question, to keep the heat out of the plastics and not burn more
Check your fluids often. Especially rear diff. I change mine every couple rides. Clean and inspect clutches. Check and change air filter. Keep up with maintenance. If your going to be riding in deep water have your snorkels smoke tested every so often. I wear pant most of the time when I ride because of heat. But I have also gotten the reflective heat tape and applied it to my plastics that are near the exhaust. Most importantly get out and ride. Thanks for watching!!
XMR 👍👍
The XMR is a great package.
@@Story53s Yes I got the Defender XMR and I'm not even a mudder. I just got it because everything is beefed up and it's a monster. My dealer up the road has a 200HP Maverick XMR in stock. That thing is a beast
Yooooooo
When’s y’all’s next ride
It will be at least till it cools off a bit.
O ya it’s pretty hot
And there’s probably not much mud
Your son needs to be in front of you so we can see what he's doing on the video too...
Thanks for the input. We are learning as we go. I am now using a go pro off the back of my four wheeler to watch him. I don’t allow him to lead because he doesn’t know where bad holes are. There is no sense in putting him in a shitty situation that could turn bad for him and the machine. Thanks for Watching!!!
👍👍👍👍👍👍👍👍👍
great video sir and thanks for sharing. These types of vids are helpingme decide between brands. I’m thinking I’d rather take an assbeating than spend that much time changing oil on an atv.
Glad to help. But in the end they all have their trade offs. I’d rather not have to disassemble the whole left side to change a belt. Like you do on a High lifter. Like others have pointed out. You don’t have to pull the floor board to change the oil. But to get to the gear box fluid you do. Thanks for Watching.
Can-am's suck lol
How’s that Polaris General treating you? Have you even been on a ride before taking it to the shop?
@@Story53s it’s in the shop getting a 92mm turbo installed
Polaris guys are like android guys. Always feel the need to speak on it or explain why theirs is better bc they know what’s up.. lol
Love the canam I got a canam 450
Thank you and Thanks for watching!
Have you went to the river yet
Yes we have been down to Bikini beach and Pebble beach several times.
The part where he almost sunk it that was scary
Yeah I thought I was about to be unswamping a four wheeler instead of just replacing a axle.
The part where he almost sunk it that was scary
Yes it was a little nerve wracking. Especially knowing he can’t hold it up on his own. But it was a good learning experience for the both of us.
Where was the farthest atv park you have been to
I have gone trail riding in Mena Arkansas years ago. Furthest mud park from us I have been to is probably Gator Run.
Where is this Park at ? What state ? I’ve heard the name but haven’t been there
It’s in Texas closest town is Jacksonville.
What size xm310s are them I'm looking at putting 33s on my xmr 800
33s on 18s
HAVE TO TAKE TANK OFF SIDE PANEL SCREWS IN MUD FENDER TAKE 1 1/2 HRS TO CHANGE OIL ROYAL PAIN IN THE BUTT
Not sure I understand what you are talking about. But thanks for watching.
Why don't you want people to know they don't have to take half the machine apart?
Just for you I’ll make a video of changing the oil with out pulling the floor board. But considering I generally go ahead and do the gear box fluid as well.
HaHa
Love the content
Thanks For Watching!
If you ever in south Texas at sabine atv park they have good trails and I ride polaris sportsman high lifter and we ain't scared here in the south 😅😅
We have been wanting to try Sabine. It’s a 6 hour plus drive for us. That’s the only downside. He isn’t typically scared of hitting holes. He was just being cautious with my son following us.
@Story53s no worries I figured as much, I just recently seen some of your videos and started watching keep up the good content very enjoyable and helpful
Thanks for watching!!!