How To Easily Bypass A Fuel Pump On An Onan Engine
Vložit
- čas přidán 23. 03. 2021
- In Taryl's mid-week snack, we bring ya more of an appetizer as this baby clocks in just under 9.5 minutes. Got an old Onan engine with a bad fuel pump?? Taryl's gonna show you what to do in order to get this bad boy working again using a modern Briggs fuel pump! Another handy trick that'll save you time and $$$. Hit that subscribe button for all the latest and greatest Taryl videos. And as always... There's Your Dinner!!
Subscribe Today! (Click the 'Subscribe' button on this channel!)
#onan #onanengine #smallenginerepair
Be sure to 'Like' Taryl on Facebook!
/ tarylfixesall
And Follow him on Instagram! @tarylfixesall
/ tarylfixesall
Pick up YOUR Taryl Apparel Here! (Shipping Worldwide Daily)
www.TARYLFIXESALL.BIGCARTEL.com
Get Your Parts From www.ProPartsDirect.net and Tell 'em "Taryl Sent Me!"
Grass Rats Garage Theme Music Available!!
Pick up a physical copy on CD from the Taryl Online Store:
tarylfixesall.bigcartel.com/p...
Started up the pressure washer yesterday and went WOOOOOOOOOO wife came out and asked what was wrong. Good thing I wasn't doing the Taryl Shuffle!
I just got done posting this same thing,my wife gets so embarrassed.
Is it me, or could Elkskins pass as a Hobbit? I think he’s become a significant CZcams character. I can’t start a single piece of power equipment now without chanting “Fire it up, Fire it up”! Arrrgh.
It's not just you.
after working on a single engine for 3months and it finally started i yelled like him
OUUUUUUUUUUUUUUUUUUUUUUU!!
Every time my wife or daughter starts the cars I yell,Fire It Up,it is usually always followed by,”Would you shut up the neighbors can hear”,lol
@@oxyfee6486 lol
Elkskins I am a huge fan of yours too my friend,I just recently subbed,wish I lived closer.Maybe I’ll make the trip from Woodstock Ontario,Canada,some day,be a pleasure to meet you.
Elkskins,You are lucky to have friends like these,and they are lucky to have you.
So true Mr. David very well said.
@@robertcrum6169 I'll Third the sentiment.
Some folks R lucky to have a friend that can fix anything at all. They tell me that here all the time it's just what they tell me after I hand em their bill is the catch.
Great cast of characters on this channel. Thanks for the dinner.
Pat Sajak has Vanna and now - Taryl has Elk Skins. The resemblance is remarkable.
Nice job guys.
If I see I elkskins in a Bikini I'm gonna ralph all over my key board.
Elkskins is like an operating room nurse handing the surgeon his instruments
Good lord lay off that brand of whiskey please...
That is called a scrub nurse and she is just as important as the doctor is
I say "she" because my old lady is one and she makes one hell of a paycheck 😂
Elkskins look like a Sergeant Schultz if anyone knows what show that's from lol
"if anyone knows what show that's from" I know nothing!
2:51 Elk Skins making sure the steering wheel is in right position for this critical step.
Elk Skins is the Ed McMahon of you tube. He should be laughing more in the background like Ed McMahon did...
That’s funny lol.
More like Larry 'Bud' Melman even looks like him.
I just had a flash back of Jonny wearing his Turbin on his head reading those tarot cards to Ed...
Taryl, you can go to Ebay and get a rebuilt Kit. Smiling!
I really enjoy watching your videos, be safe and have a good day
I’ve also used them on Kohler K series and Command engines to save money over buying the mechanical pumps. They are also great when the fuel tank is lower than the carb and gravity won’t work. Thanks for sharing!
It’s always nice to learn something new
Thanks guys.
I just did this on a friend's Case 446. Worked out great. Unfortunately, this was AFTER I had installed a cheap kit to replace the original vacuum pump (like you said it worked for a while-ONE hour). Thank you so much. The Briggs pump works so well!
I tried and tried to rebuild the Onan fuel pump using the cheap Chinese rebuild kit. I finally gave up and bypassed the fuel pump just as Taryl demonstrates in this video using the B & S vacuum pump. I had to make a gasket using a thick piece of gasket material because the old gasket was very thin and it leaked gas. I also replaced the gas line from the tank and added new plugs and a condenser. It is unbelievable how well the fuel pump bypass worked...the Sears SS16 Onan starts and runs just great.. Taryl Saved my day!
Nice to see you keeping the onan engine running taryl
Nice love them old machines !
received my order from ya yesterday, coffee cup is premium, z bender is outstanding tool, and the gel lubewhat can I really say about it, excellent without the normal mess with most lubes, just aim and spray. I thank you very much for the stickers you threw in, just haven't decided where to put them yet. keep up the good work so we can keep learning
double k from western pa
I did your fuel pump bypass. Works well. Although it was not the fuel pump. it was a cheep Chineese condenser. I put a SBC ~Blue Streak on and no more loss of power at high speed. I have a 18/6 BG/MS with a DD11 Carb
Thanks for the tip guys 😊
Your Onan it Taryl! Get it..
Yeah, and the water's deep too.
Thank you for the video
We all Luv you Taryl! Great video Brotha!
Nice retrofit, Taryl!
Can't stop an Onan. Badass engines.
I am about to do this fix on my 1973 Sears SS/16 Twin tomorrow, thank you Taryl! I can't wait to FIRE IT UP FIRE IT UP FIRE IT UP!
Good simple solution to buying that expensive factory pump. Thanks Taryl!
Thank you!!
I frigging love Elkskins!!!
I love the sound of an onan!
Great video
Nice job 👍
Nice we need more onan videos
What a great day
Good stuff crazy man....
Did mine like this 3 or 4 years ago still working
Really good video and funny 😆
Dang that was a nice midweek snack..
Watch that circumcision tool...almost got his finger.
Elk Skin's look like Buddy Hackett !!!!!!!!!!!!!!!!!!! LOL !!!!!!!!!!!!!!!!!!!!
Great video Taryn I would appreciate a video on how to fix the surging on one of those onans I have a p216 onan on a wheel horse 1996 model 416 that just keeps surging any help would be appreciated thanks Ron
Cool idea! Elkskins is such a hoot!
Thanks buddy for sharing everything with us you guys are awesome
Fire it up fire it up
I did something similar but I used a electric fuel pump on my case 446 tractor it runs great. No problems. It starts really easy.
Elkskins! 🤘
Coool. Great. Ok, now how about a tecumseh OH120 with a LMH CARB fuel pump ? Can you do the same without removing the carb, or is it just easier to remove the whole thing, buy a fitting and intake gasket, etc...?
Elkskins👍
Can this be done to the Briggs opposed twins?
not sure what's wrong with mine but after a replacement check valve plate it pumped fine for a few seconds and then stopped, opening it up revealed the rubber flaps under the reeds had somehow blown out or expanded and were hanging up.
Great video Taryl, those china carbs are garbage forsure lol good fix!
I like to use mikuni fuel pumps. They can be rebuilt and the kits are readily available.
those plastic fuel pumps are made by mikuni. kohlers use them too
Is the adjustment the same for the brass float--1/8", or is it different?
So is there an unused puls connector on one of the valve covers or ??
Should also get a new Model Replacement Brass Float for her.
As the old Ones ALWAYS fail. well on 95% of the onan bf ms engines i have worked on.
Is the 18 horse 5400 series any good do they have plastic cam gears in them I'm looking at a craftsman mower at lowes
No fuel line clamps or are you going to add them after??
Thought about it but you have a small vent in the cover plate won’t thar leak? Or do you use Taryl putty there?
That was a damn good Sears mower. I believe Roper had one as well. Not sure who actually made it.
what was the pulse line hooked too?
Hey Taryl 👋
How did you test the orig pump?
Elk Skins standing there with both eyes looking out the same hole. Em ole doobies got him walleye’d.
we have the same carburetor and it is spitting fuel , any idea why ? and how to fix it
thank you
recall the HIGHWATER pants Elkskins was sporting in some older video. Straight out of Beverly Hillbillies
Great tip! And an excellent assistant! Just needs to practice the wooooooo🤣
wil that work with the briggs oposed twin engines? I hate those carb mounted vac pumps
Elkskins reminds me or Marty Allen. Remember Taryl, shop rags are useful!
Is that a check valve on the fuel line and where can I get one? I have drain back causing my onan to crank way longer than that thing did.
What did you plug that pulse line into? Intake manifold vacuum hole?
crankcase port then to p port on fuel pump
Put them gaskets on any other way they leak Thanks Taryl
Elk Skins is funny AF !
Elkskin is my fav now cheer from Canada Bro !!
Woodstock Ontario,loves Elkskins,WOOOOOOOOO.
I think fire it up is what you guys do off camera ?
Fire it up, fire it up ! Gotta love it lol
YOU CAN DO THE SAME WITH THE OLD STYLE BRIGGS 14 AND UP OPPOSED TWINS ALSO HAVE DONE IT A COUPLE TIMES MYSELF. CHEAPER THAN BUYING A NEW CARB.
Thanks, I was going to ask that question. Mine is a '77 L head.
Taryl. you are the best!! Can't stand a dirty Car-bit-trator
We call those loppers the Bobbits. 😳
Taryl What did you do with the diaphram breather hole? Its shooting fuel out! There is a tiny hole on that plate where that giant circle piece is on my model. DD15A Carb
Think im gonna block her up with something or maybe a little tack weld over it xD
where does the PULSE hose originate? I thought crankcase had negative pressure.
Your pokes fitting on your engine magically showed up huh
What, no hose clamps? Where did the pulse hose go to the engine? Great video, thanks for that.
Any crank case pressure above the oil line.
Pulse? Is that hose connected to a vacuum port on the intake that moves a diaphram on the briggs pump?
Was wondering the same thing
Yes. It would have operated the pump built into the carb. I expect that it connected to the block piece that he didn't use.
Watch them fingers......whoooooooo !!!
Hose cutting tool: Something you see in a Mafia flick where they try and get information out of a tied up rival family member.
🍻
Is that Buddy Hacket with Taryl ?
I wish I had this engine in my sears so stead of the Tecumseh 16hp OHV.
Contact me
I have 3 and we can work out a swap. Texas
I just cut out the diaphragm, tightened and sealed the gaskets with leather gaskets and gasket maker and plugged the "in" outlet with a bolt and the other end became my pulse pump feed
Is that Buddy Hacket
Elk skins
You should use a better fuel filter since its got a fuel pump, that style is for gravity feed.
White is for pump. Gravity one is red.
Hose clamps?
Hey I did this conversion and the pump is flooding the carburetor
👍⛽️👍
Tighten it up then,fire it up ,fire it up ,fire it up 👀😁🖖🖖✌✌✌
I did tried this repair and fuel sprays out of the air bleeder hole in the inlet cover! Should I knock out check valves? I’m not sure what to try next?
I have the same issue. How did you resolve???
Same. Trying to seal with moto seal
Elskins looks like Oliver Hardy lol
Thanks Jerry- I was trying to put my finger on it but just couldn't quite do it. You got it though.
I was looking at Elkskins asking myself..."Is that a little Hitler mustache...does he have teeth...is it just the lighting?"
Really like them onan motors, but every one I get is always wore out.
No hose clamps?
Next video: how to rebuild a fire damaged Onan engine.
Me working on old Omans:
Step 1 - Don’t.
Y'all gotta love where them engineers stuck them condenser and points... Makes me go easier on people that do drugs. I need a bottle of Old Grand Dad just to work on one.
Will Ronnie be selling the scrap fuel line?