Yale how to replace a Nightlatch
Vložit
- čas přidán 22. 08. 2024
- Learn how to install a Nightlatch lock step by step. Use this video as a guide to replace your existing nightlatch lock with a secure Yale Nightlatch. Watch our 'How To Install' series for more easy fit security upgrades for your home!
Before changing your nightlatch measure the "backset" to make sure you get the correct size, the backset on my nightlatch is 50mm, most are 40mm or 60mm
Great video - simple and to the point.
You had me right up until you said "hack saw" 🙈
ßsßsß😊
Hey, this is way too easy when the door is open. What shall I do when the door is shut, de Yale deadock is broken and it is impossible to open from the inside? I even can’t disassemble it because the screws are on the wrong side of the lock.
Use Keys to unlock 🔓 fr ok m Outside. I use my garden Back 🔙 Door. If None then try Window 🪟
Or Call professional Lock smith 🔐
Excellent. Thank you.
The arrows on the back of my existing lock were not aligned. When I align them it is the wrong angle to fit the bar. Any suggestions?
If you now install a door pull the bar will now be short and what about the edge of the door where old lock was mortised in, what a mess!
No mention of refitting a door pull, or making good the door where the old lock was located?
Hi, thanks for your feedback. We will look to amend in the future
@@yaleuk
Removing mounting plate on a P2 lock
Thank you. Great video. I have lost the little screws which are for fixing the latch to plate.where can I buy then or what size
Good video. Does she drill pilot holes for the wood screws first, or would you recommend to do so? I couldn't see any under the mounting plate.
Would recommend pilot holing the screw holes first to a maximum size of 3.0 to 4.0 depending on screw thread thickness
AWFUL VIDEO. The video says 'How to INSTALL a Nightlatch. There is a vast difference between replacing a night latch and installing a new one. Replacing means all the holes and recesses already exist whereas if you want to INSTALL a new one then you must drill new holes and cut new recesses in the wood door and frame to accept the lock and latch. I want to INSTALL a new lock on a new door, NOT replace an existing lock on an old door. If this video is HOW TO INSTALL a lock then the most difficult bit is preparing the holes and recesses which she does not show us.
Hi, thanks for your feedback. We have now amended the title, sorry for the confusion
And where is the How To INSTALL video now? I have same problem as David L. How To make 30mm diameter hole for the cylinder!?
@@robbiespence6504 With a 30mm Spade bit...?
Get your hands out of the way lady, we can't see what your doing.
Whats that women number?