Reverse A Yale Lock For An Outward Opening Door 👉🏾Must See!

You can find out more about reverse a Yale lock for outward opening doors you can visit: 🏽👉🏾 www.lockmonster.co.uk/
The video is presenting reverse a Yale lock for outward opening doors but also try to cover the following subject:
-reverse a Yale lock for outward opening door
-how to reverse a Yale latch
-how to reverse a cylinder lock
CZcams is the best place to go when searching for videos about reverse a Yale lock for outward opening doors.
Reverse a Yale lock for outward opening doors is undoubtedly something that intrigues you and other people so i made this video .
++++++++++++++++++++++
If you wish to find out even more concerning reverse a Yale lock for outward opening door I advise you to check out our various other video clips : • How To Replace Your UP...
_________________________
If you were searching for more info about reverse a Yale lock for outward opening door or how to reverse a Yale latch did this video aid?
Perhaps you wish to comment below and let me understand what else i can assist you with or information on reverse a Yale lock for outward opening doors.

[@erangallage3151]

Thank you. Cleared a puzzle about how the spring works.

[@senswiwuu]

Thanks for posting! Very helpful

[@joepower4702]

Thanks !

[@janearthars1897]

Thank you so much for such a useful explanation!!!! My goodness, the shed door lock has been broken for years but now I have been able to restore it myself!!! Wonderful

[@amokopera]

Brilliant. Easy to follow and I successfully reversed the lock. Thanks 🙂

[@JohnDrogan]

Thank you. Spring was a bit fiddly but saved me from having to buy another lock. Cheers.

[@NicleT]

Thanks. Exactly what I was looking for.

[@ExeCodger]

Thanks. Helpful video short and to the point.

[@tools144]

Brilliant. Thank you.

[@81Fio]

Thank you so much! 👍🏾

[@iancameron3137]

Great video really helped me out thanks for shareing

[@rebeccawood9472]

You were very helpful thank you

[@rossitherhodie5659]

Thank, Just what I needed to do.

[@DxDx222]

You saved me £££ thanks a lot✌🏿✌🏿

[@garethlatham6388]

This was exactly what I needed! Problem solved immediately! Short. Concise. Total clarity 💪🏼😎👌🏼

[@ayodejirauf7712]

Thank you

[@sedonyareilly6358]

Thank you for this video, my lock has been broke for wa week. Thanks pal 😊 👍👍

[@LockMonster]

glad it helps

[@MK-mh6lh]

Is this possible with any ERA or other Yale night latch ?

[@LockMonster]

Yes, it works with many more brands, not always the expensive high security ones. For those you need to buy a SC73 on our website

[@MK-mh6lh]

@@LockMonster thank you, just had a look, unfortunately it’s waaaaay out of my budget for a lock

[@aaron6841]

What happened to yale they used to be quailty now its pressed steel and zinc alloy cast made in whatever country will do it the cheapest.

[@chelseashakespeare3396]

Hi, can you recommend a night latch lock for a heavy outward opening door, but needs to be brass. Thanks

[@LockMonster]

any good???.. www.lockmonster.co.uk/item/era-british-standard-security-nightlatch-bs3621-1830-1930

[@aaron6841]

Personally would go with the cisa electronic lock

[@MrOChleirigh]

As shown, this will not work. If the strike is simply recessed into the jamb so that it is flush with the jamb, the night latch must be offset from the edge of the door by a significant amount, not flush with the door edge. Otherwise the body of the night latch will just hit the door jamb and the door will not close. But the back of this particular night latch is not flat. There is a raised edge that is meant to be recessed into the door edge so that the side of the night latch body is flush with the door edge. This means that, in order to offset the night latch from the door edge, you need to remove that raised edge or else create a slot in the door to accommodate it, so that you can place the back of the night latch flush against the door even if it is not at the door edge.

[@LockMonster]

It does work, i've been fitting locks since 1985, maybe i didn't make it clear enough for some? All comments said it helps?

[@immanueldelcastillo6041]

Do nOt aTTeMpT To MoDiFy iT

[@plasticbike]

Flipping it on many brands makes the stopper button fail. 😢

[@immanueldelcastillo6041]

@@plasticbike perhaps you should flip it as well?

[@LockMonster]

not on most, especially yale I show here. Thanks