Instrument Basics: Function Generator - Workbench Wednesdays
Vložit
- čas přidán 27. 07. 2024
- Generating signals with a waveform, function, or arbitrary generator lets you test all kinds of circuits. Learn how to get a function generator to output a signal, the 3 types of waveforms you can create, and which controls matter. James, the Bald Engineer, explains the difference between analog and digital generators: bit.ly/2pOCZXI
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/2MFMG0v
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: bit.ly/2KLz0TS
Roadtest and Reviews: bit.ly/2KH4fj3
Project14: bit.ly/2wPnajx - Věda a technologie
Thank you for the info, I'm 57 and just now learning, ultimately I want to repair flat screen TV. Thank you Element 14!
hi there. I’m 56 now, had some knowledge of electronics three decades ago, but never tried hard to learn ins and outs of it until recently. I bought almost all testing equipment and would like to repair motor controllers, work on smps etc. have you managed to learn a lot within last three years since you wrote this comment?
@@nirmanmulalic1824 Hello I did not pursue what I was wanting, Wish you the best.
I loved the explanation, and the reference to the graphing calculators.
I haven't used a function generator but I have seen the sweep function used when testing audio amplifier circuits. 20hz to 20khz sine wave, to see if amplification is close to linear throughout the range.
I'll suggest this video to the students. They will learn something and enjoy your presentation.
I am pretty new to the world of ac electronics and this video helped a lot.
Succinct and informative, I liked your presentation so much that I subscribed. Best wishes!
The generator sweep i use for filter test with a scope. You can do the same thing with a SA but that SA will require a track be more money and SA may have sensative inputs you dont want to blow up. For me the scope and generator are a better fit for when i need it. Im not at RF frequencies so it works.
Thank you very much I wish somebody would make a video of how to use the function generator in it repair situation you know while repairing a circuit board how would you use it to diagnose a bad component
And how you would connect it to the component you are troubleshooting
Nice
Is that a toaster oven in the background?
OK this is a important question to me I hope you read this. I am just now learning electronics in an old age out of boredom LOL. So I've been tinkering with Arduino and building my own simple circuits to make my life easier I've built a couple small projects that turned out nice etc. I do not have a scope but I'm in the market for one and I'm only gonna be able to afford a Chinese one someone told me hantec makes some that are also combo signal generators.
This is important to me because add an unrelated topic I have a case of galvanometers that are very expensive they were from a facility we shut down and they were gonna throw them out despite them being brand new but sarbanes Oxley dictates you have to get rid of that inventory if the product line is gone so it was going in the dumpster. I took like $50,000 worth of I'm home but some of them are known to be bad in the box and they weren't marked well by the guy that used to tune them.
The driver boards are paired up with the galvanometers and I'm pretty sure I know how to make the adjustments but I wasn't sure if he used a signal generator to do this does that make sense to you at all? I believe he was using an oscilloscope and the signal generator to trim the square wave and get out the peaks. So does it sound like some a job for a signal generator?
Could you please make a video on how to use a fg? I have one and I'm insecure about how I can connect it to breadboard examples and scope with application of trigger in- and outputs from the fg or scope.
Please help
Some function generator has a local view button, what is it for?
Ok so I have no clue how to properly use a function generator. I did buy an inexpensive one on temu because I’d like to learn to use it. I’m wanting to learn about sound waves and build one of the sound/sand tables that makes the shapes depending on the frequency played. I want to know what frequencies match up with certain crop circles that haven’t been proven to be man made. That, and I think it’d be cool to make one and see the shapes in general. I know I don’t need one for that, but I’d like to know the specifics of the frequencies so I understand better. Do you have any suggestions for me 😊 a very clueless beginner. Have you ever built a table like that?
mod can be used in radio repair alignment of the radio.. audio filters i would think also ..
Can someone explain to me if it’s possible to listen to what you’re outputting if it’s within listening range??
Technically, yes. But the drive strength (current/power capability) out of a function generator is very low. You would need some external amplifer circuit to drive a speaker.
MUSTOOL MDS8207 40MHz 200Msp Digital Storage Oscilloscope Multimeter Scopemeter
Anybody know if this digital multimeter/oscilloscope above would be good enough? Or do I need to buy the big dog $350 scope? Thanks
Is very good. I'm looking to buy one too. 40 MHz is ok for most the projects.
FYI, everyone, the above MDS8207 has a max frequency of 9.999MHz, so if you need higher than that you'll need something else.
I have Bill & Dave 3310b analog function generator with a range up to 100 kv.
10:00 When does the toaster oven come in to play? 😀
Toaster ovens are very commonly used in labs as cheap re-flow ovens for surface mount assembly.
There are DIY controllers for them to ensure that the temperature profile is correctly followed so that the parts and solder paste used is correctly re-flowed.
Search CZcams for "SMD toaster oven".
@@yrath5034 thanks for the new idea
@@girishchandra2236 You're welcome!
Is the output AC or DC ? ..or both ?
Are function generator and pulse generator same?
I have SIGLENT made 50-ohm function generator, can I use this instrument as a power source for electrodeposition. How can I generate pulsed current using a function generator?
You need to amplify it using a transistor (bipolar, mosfet, igbt - it depends on). This transistor needs to witstand the current and voltage you use. There are special transistors designed for use in power circuts. Maybe you need to use cooling. Also you may use a driver before transistor.
I am happy for them that they have 721 thousand subscribers, but unfortunately it means they talk at you instead of with you.
Yeah and you can't learn anything because you can't ask questions.
So it is useless.
@@SDsailor7 And the point is learning 👌
So many bench tools: LCR meters, multi-meter, ESR meters, bench PSU, oscilloscopes and not function generator- can't oscilloscopes have that built-in?:-)
Some have it built in maybe in basic form.
does it work without connecting it to other devices?
Of cource. But what sense is in not using it's output in some other device? Under "device" i mean even a single element like a coil or audio speaker.
sir waveform generator connect to pc in steps explain sir please help me sir
Can signal from function generator kills human? I'm a hobbyist.I'mafraid.
lol
Usualy not but if yes then only once.
What are humans?
show 4w power amp.. what is max current output
If it has knobs it is generally an analog???? 2:20 Well.....I don't know but...most digital generators also have knobs...(and a dial)
That music is distracting.