Polaris RZR 1000 reverse chain install
Vložit
- čas přidán 22. 04. 2021
- This is a reverse chain upgrade on a 2020 RZR 1000 XP. The factory chain broke and got between the ring gear and the case. It broke the case as well. The kit I used for the chain is from Specialized ATV from Arkansas. It also included the low speed gear that also has to be replaced. I also installed the upgraded Specialized ATV bearing retainer plate. I used a replacement case half from SuperATV.
- Auta a dopravní prostředky
Most informative ( how to video) I have ever watched. You saved me several times on my gear reduction install. Thanks
Thanks and thanks for watching
Excellent video
Thank you for fixing it. Very informational video. And yes I am very rough on it lol.
"dont ask me how i know" about the shift fork lol
Lol I was just about to text you
Hey watch your videos just one mechanic watching another really enjoy it. Would love to email you off you didn't mind. My email is firemen1225@gmail.com please if you don't mind. I do have a question see if you have seen this problem before. I run a repair shop and sometimes just don't know everything so good to reach out!!
Where are y'all located? Would love to take my UTV to him to get it fixed!
@@joshlee364 he’s in Kershaw sc
Very detailed, thanks!
Any problem with the superatv for clearance with the chain. Or noise when all together problems at all ??
You didn’t need use any gasket maker on that?
I have a ranger 570 that is very hard to get into reverse. I have to sit there and work the shifter back and forward while tapping the throttle. It will eventually find the gear but will pop out after driving in reverse for 30’. The entire time it’s trying to go into gear it makes a grinding sound as if it’s trying to engage but can’t fully. No noise once it’s in reverse. I adjusted the cable multiple times and all the other gears are good. Any ideas before I pull the transmission?
Got the same problem. Did you find an answer.
@@gushowlett4161 yes check out the video on my channel
very interesting! i wonder why u choose HL belt chain not turbo? because turbo use reverse gear not belt. very curious about that!
I used the chain from specialized ATV. There was a supply issue when I did this and there were the only folks that had one in stock.
Well im doing mine now as we speak
Mine did not come with the gear you referred to at 25:45 not sure what to do
Does yours have a different size gear on the smaller shaft that meshes with the gear at 25:45?
@@FourwheelerDoctor we found out the customer accidentally ordered a general reverse kit instead of a rzr. Different amount of low gear teeth. We figured it out
@@kolassalkrown0697 thanks for letting me know
I can't believe you reused them bearings.....
They were cleaned and are still going strong for 2 years now running 35s
If people who always have to throw monster mud tires on these rzr's would put on more sensible tires this would not happen. If you can't help yourself then do the gearbox first with the geared down & beefed-up parts