New Power Steering for the SC300 Drift project
Vložit
- čas přidán 20. 08. 2024
- We replace everything that has to do with the power steering stystem including:
OEM Reman Rack
Whiteline Rack bushings
Aftermarket P/S pump
Power House Racing Reservoir kit w/ High Pressure line
Aftermarket P/S fluid cooler
while that rack is off you can get to that pesky driver side engine mount to. thank you for this video i am doing the steering bushigns
can you just remove the air control valve thats on the pressure hose? You can just cover those holes?
What is the 6an fitting thread size you're using in the rack for the low-pressure side of the power steering reservoir ?
I’m not sure what the thread pitch is on a -6AN. They should all be the same
What size were the an fittings for the rack and from pump to rack also length of your high pressure line???
I believe they were -6AN fittings.
The length of hose was maybe 1.5ft long
I just purchased an angle kit for my sc but I'm wondering how much poke im going to have and what size wheels to get it to the fender. My question is what are you going to do about your fitment? Are you leaving as is or getting different wheels?
It depends on what kit you get. I think the WiseFab kit that I have is the most aggressive one. I test fitted a 17x8 +45ish wheel and it poked out of the fender only alittle bit. I’m currently running a 17x9 +12. I want to run a 17x9 +25-35 but haven’t purchased any wheels yet. Right now with my current wheels I don’t run on anything lock to lock, I just had to trim alittle of the fender away at the back of the front fender
why not just got with an electric ps conversion? that's what i'm going with. those pumps suck
Where did you get the reman oem rack?
I bought it through Lexus actually