Probably want to wash the car thoroughly first before wrapping it. The edge of the panel should cut about a 1/4 inch away from edge then heat, tuck and fold. At the corner, heat then pull up and pull down toward the back of the corner. For those door handle, I wouldn't bother to take them off to wrap unless you are trying to wrap door handles like an ISF. Check out CK Wrap from Toronto. I learned how to wrap from his channel. By the way, what spec front wheel and tire you are running with the wise fab? trying to get some idea what I need to get. I might go with the FDF kit as it retains the stock knuckles. Keep up the good work as I am building one of the same car here, and will soon start gathering parts.
Wheel spec is alittle aggressive, it’s 17x9 +12... ideally I’d want it to be like a +30 but these are what I had on to begin with. That’s why I want to get a different wheel setup for the front. These wheels still clear lock to lock though with minor trimming. Tire size in front is a 215/45ZR17 If you want to keep your speedo I’d say to get the FDF kit. WISEFAB doesn’t have a provision for the speed sensor.
@@EvanIggy The magnetic sensor at the knuckles are for anti lock brakes (ABS), right? At 17x9 +12, how much room does inner side of the wheel have to the control arms at full lock? what about the outer side to the wheel well cavity? Just want to gauge as I am looking at something like 18x9.5 +22. Pretty simple fare run of the mill size and offset. I really appreciate your input.
@@QGARAGE at lock to lock the upper and lower arms have about an inch before hitting the inside of the rim. And I believe they do speed and abs b/c my speedo doesn’t work anymore after removing my front and rear sensors.
Probably want to wash the car thoroughly first before wrapping it. The edge of the panel should cut about a 1/4 inch away from edge then heat, tuck and fold. At the corner, heat then pull up and pull down toward the back of the corner. For those door handle, I wouldn't bother to take them off to wrap unless you are trying to wrap door handles like an ISF. Check out CK Wrap from Toronto. I learned how to wrap from his channel. By the way, what spec front wheel and tire you are running with the wise fab? trying to get some idea what I need to get. I might go with the FDF kit as it retains the stock knuckles. Keep up the good work as I am building one of the same car here, and will soon start gathering parts.
Wheel spec is alittle aggressive, it’s 17x9 +12... ideally I’d want it to be like a +30 but these are what I had on to begin with. That’s why I want to get a different wheel setup for the front. These wheels still clear lock to lock though with minor trimming. Tire size in front is a 215/45ZR17
If you want to keep your speedo I’d say to get the FDF kit. WISEFAB doesn’t have a provision for the speed sensor.
@@EvanIggy The magnetic sensor at the knuckles are for anti lock brakes (ABS), right? At 17x9 +12, how much room does inner side of the wheel have to the control arms at full lock? what about the outer side to the wheel well cavity? Just want to gauge as I am looking at something like 18x9.5 +22. Pretty simple fare run of the mill size and offset. I really appreciate your input.
@@QGARAGE at lock to lock the upper and lower arms have about an inch before hitting the inside of the rim.
And I believe they do speed and abs b/c my speedo doesn’t work anymore after removing my front and rear sensors.