How to Replace Exterior Door Handle 98-01 Ford Explorer
Vložit
- čas přidán 25. 08. 2024
- Buy Now!
New Exterior Door Handle Set from 1AAuto.com 1aau.to/ia/1ADH...
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped off exterior door handle. This video is applicable to the Ford Explorer model years 98, 99, 00, 01.
This process should be similar on the following vehicles:
1995 Ford Explorer
1996 Ford Explorer
1997 Ford Explorer
1998 Ford Explorer
1999 Ford Explorer
2000 Ford Explorer
2001 Ford Explorer
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/obE/1AX...
• Phillips Head Screwdriver 1aau.to/obE/1AX...
• 11mm Socket 1aau.to/obr/1AX...
• Ratchet 1aau.to/obT/1AX...
• Socket Extensions 1aau.to/obr/1AX...
• 5/16 Inch Drill Bit 1aau.to/od/1AXA...
• Cloth Rags 1aau.to/oE/1AXS...
• Center Punch 1aau.to/oo/1AXA...
• Chisel 1aau.to/oo/1AXA...
• Hammer 1aau.to/oT/1AXA...
• Putty Knife 1aau.to/op/1AXA...
Subscribe: / @1aauto
Check out our playlist:
Ford Auto Repair Videos: • Ford Auto Repair Videos
Door Handles: • Door Handles
For More Info visit us at 1aau.to/h/b7/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Spent 2 hours fighting with it before finding this channel. Thank you so much, you're a life saver
+Nintendork Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
This video shows you how to replace the outside door handle on a 98-04 Ford Explorer. if you need to replace the inner door handle on your Ford Explorer, here's an auto repair video that will show you how to do that. czcams.com/video/l7CkwILS8b8/video.html&feature=plcp
Thanks for taking the mystery out of this for me. I try to do as much as i can myself. Up to about 340K now.
Watching the video made this an easy job. I used a 1/4" drill bit and had no problem removing the rivets. I bought a pair of 1/4"-20 x 3/4" socket cap screws and 1/4"-20 lock nuts from Home Depot to mount the new handle. Make sure you get the little hooks on the bottom of the handle in behind the door handle before you tighten the mounting screws.
I'm using button head bolts.
Thanks for the video. You save me from paying some guy $150 to do this for me. I did it myself in about 45 minutes.
$150 is about right though
@@peralez2383 bullshit lol. The replacement is 30 bucks. With primer and paint matched it costs 55. And a half hour of your time. You telling me some mechanic REALLY thinks hes worth 100 dollars an hour? None of them are. A majority are Just scammers who love to take people for every penny they can.
Thanks for checking us out. Have a great day. 1aauto.com 888-844-3393
Worked for me. Thanks for the video! Note: If both the interior AND the exterior latches are broken. Use a punch and 5/16 drill bit to remove the exterior latch and then use needle nose pliers to push DOWN on the rod to open the door. Then proceed to remove the door panel, etc.
The door handle comes as a whole assembly. We carry the replacement part shown in the video on our website 1aauto.com Part Number: 1ADHE00178 (888)-844-3393
Dude, you rock. I had to replace the door handle and outside mirror. Both of your videos were spot on. It works for the 1997 also.
outstanding video on how to replace this handle had a friend that is a car dealer and tried to do it himself he worked on it for about 6hrs and still wasn't able to fix it, i was pretty sure i knew how to do but watched your video just in case i had it out and new one back in, in about 20mins door panels and all thanks for the help
Thank you! I would never have attempted this without your video. It went reasonably well until I tried to pop rivet the handle back on and discovered they were too small, so I spent 1/2 an hour scrounging up a couple of bolts and lock nuts, after that it went together. And it worked, YEA!
My handle was broken on one side. I just snapped the old one off since it was being replaced anyway and it made it much easier to access the rivets.
I really appreciated the video, much easier to watch something than try to use just the Chilton manuals. It's the little details that make all the difference. Anyway, I have a 2000 Ford Explorer XLT. When it came to drilling out the rivets, I found that using a 1/4 inch drill instead of a 5/16 worked much better. I didn't need to use a chisel at all. Thought I would add my experience to the subject. Also, it is imperative that the clip on the rod be replaced in the exact same spot or you will run into a door handle that still won't open the door. No big deal, but a waste of time to have to remove and install the door panel a second time. Thanks again.
I did mine today and AFTER punching the center of the rivets, I used a 1/4" drill bit and followed with the 5/16" and it worked really well. Your advice on putting the clip onto the rod in the same spot also helped me avoid an issue I'm sure, thanks. I tested the lock/handle assembly and the window down/up BEFORE I put the panel back on. I am not a mechanic, and this was a first for me, so I was pleased when everything worked.
They don't come with bolts. You can either attach them with rivets like the factory had done, or you could get a couple of small bolts from your local hardware store.
Buying parts is one thing I do with 1A Auto because of price and fast delivery....but the real reason is because you save me thousands of dollars of repair on my cars and trucks via the videos that are clear and well organized....things I would have never considered doing on my own you make simple to do after watching your videos. Thank you so much very these. My VW 2000 Passat 4motion has > 300K miles and still runs like a sewing machine! Too bad for the new car dealers!
vail8150 Thanks for the kind words. Glad to hear we could help you out. 1aauto.com 866-403-3393
Thank you. This was so helpful. Made a difficult job easy.
@Cristofre Thank you for checking out our Ford Explorer door handle replacement video. We have these door handles available on our website. 1aauto.com/1A/DoorHandleExterior/Ford/Explorer/1ADHE00178?ATony
You saved me so much time with this video. The rivets were the worst since I had no drill nor a chisel but I still got them. Thank you!
Thanks 1A. I am replacing the handle on my daughters ford for Christmas. No more passenger entry with 2 kids!
Dang it! So helpful but idk if I can do all of that! What happens if I already have to lift up on the handle to open the door and it jiggles as if it’s loose. I’m assuming that it can’t be fixed because the springs
never realized how many things go wrong with an Explorer.. I have done some work myself and videos like this are VERY helpful THANKS.
THANK YOU! I spent an hour trying to put the door handle on, but I didn't take the window track off, it was extremely frustrating.. Then I found your video, very helpful, thanks
Thanks for this video - replaced my driver side rear handle. Needed a Help kit that included a new actuator clip retainer, but it all went in exactly as outlined in the video.
That is great, I feel much more confident that I can do the job myself. I sincerely appreciate this video, Thank you!
Thanks for the video. You helped me repair my 2000 Mercury Mountaineer. With the $15 door handle from 1A Auto, you saved me $200 for sure! 👍
Thanks for all your Help!
Thank you for posting these diy videos! You have made life so much easier
Just replaced one of the back door handles, which was a little more of a pain because the assembly is harder to get to. But the video was a great help, thanks!
FYI: I drilled the rivets out with the 5/16 drill bit and I used hex head bolts that were 3/4 inch long
Thank you. I just replaced my door handle with the help of your video. Very thorough!
Thank you for watching!
1aauto.com 888-844-3393
UPDATE… with the back door that would not open from the inside or outside, took out the two bolts that hold the seat to the floor, the seat lifts up hinged and out of the way. With front seat moved all the way forward plenty of room to work. Had the other door panel off so I knew where the clips were, starting at the bottom of the door under the speaker got that clip out , it went great from there THANKS and WOW received handles in less than 48 hours after ordering with your free shipping.
You may need to remove the door panel and pull the door rod inside of the door to pop it open for you.
Oh god thank you, the Chilton manuals are the worst, again you are a life saver.
Thanks for checking us out. 1aauto.com +Bruce Nickens
I just followed your instructions and was able to replace my door handle with no problem. One note- the bolts, nuts and washers for installing this did not come with the handle from Ford parts. Luckily I just happened to have the right pieces at home.
My door handle has been kinda loose for a while now. I wondered if it was something that needed to be replaced... apparently I need to do it before it breaks and I can't open the door anymore. I had no idea that it was such a common problem in Explorers. Thanks for all of your videos!
My 2003 was slightly different than the video (1 screw at the door jam) but for the most part was perfect. I used metric bolts 6x1 10mm long w/ 6mm flange nuts to secure the handle. Just for safety I put a couple drops of blue locktite on the threads before tightening. This video was very valuable....thanks a bunch.
I've done this repear on the last handle and used your video, thank you, I'm doing it again, always forget the window track.
Thanks for stopping by and checking us out. Have a great day!
This video was very helpful i watched it twice before i did the job.it saved me time and gave me the confindence to do the job right the first time
+Dennis Desilets That's our goal. We're glad we could help you out. 1aauto.com 866-403-3393
excellent video, exactly what i was hoping to find. Never did this work before but managed to get it done in half an hour. Thanks alot!
Thanks for watching.
1aauto.com 888-844-3393
thank you this helped me out a lot I would have never thought of doing it like that I was working on it for 3 hours until I saw this video thank you for saving me money thank you it has helped me
+tobie williams A little know-how can go a long way. We're glad the video helped you out. 1aauto.com 866-403-3393
Thanks for the video, a tip to unsnap the actuator, use a paint can opener, hook the tab and it easily opens.
Best way to learn how to work on your car is through videos .Toss the HOW TO books in the trash . you cant understand them anyways. Seeing it done in videos is way more helpful . I did both my door knobs in less than an hour watching this . Thank
you for the video.
Well, don't write off the books all together. They can be really handy for reference. I like to keep one around for referencing torque specs, bolt patterns, and firing order and such. But we're glad you're enjoying the videos all the same! thanks for watching. 1aauto.com?CZcams&CTA%20Comment&ATony 866-403-3393
Yes of course, sometimes the books just confuse me more but they do have a place in automotive repair.
thank you guys. I purchased all the time from 1A auto
+gnikmi That's awesome to hear! Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/1A/DoorHandleExterior/Ford/Explorer/1ADHE00178?CZcams&CTA%20Comment&ATony
Thank you! This was very detailed and helped completely...took me two days because my previous window repair wasnt correct but I got it! I will recommend you guys!
Thanks a lot for posting. I just replaced mine. Very helpful video!
@cartreachery The replacement door handles are just like the original ones that Ford had. If you co to you local auto body supply store they should be able to color match a spray bomb for you to paint you new handle the same color as your Ford Explorer.
HI Jorge, you would need to rivet them back in or buy some bolts to bolt them back into place from your local hardware store.
We currently do not have an auto repair video that shows you how to make this particular repair. We'll keep this in mind during any future repairs that we may make.
Thanks so much, I worked on it for over a hour til I saw your video.That little plastic clip had me puzzled.It was just a snap lol
Bought my handle from the site and installed it just like you guys said! THANK YOU!!!!
@Tricia67060 Currently we do not have a video that shows you how to remove the seats. They should be bolted into place.Once the door panel is off, you should be able to reach inside of the door and pull one of the rods to unlock the door. Hope this helps you out.
Thanks for the tutorial, just changed mines with the help of your video. Everything was as described. Appreciate it bro.
+DogMugz Thanks for checking us out. 1aauto.com
Thank you for showing me how to do it.......time to tackle the door handle.
Excellent videos. This one plus another of yours helped me out greatly while changing an Explorer door latch. Thanks!
Very helpful video!! Part ordered from 1A Auto, came as promised. Only thing was no fasteners were in the package. Had to get stainless steel nuts and bolts at the hardware store. Otherwise, fantastic. I would never have been able to do the repair without this video. Thanks!!
+Charlie Gahn Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
What size nuts/bolts did you use?
@@bradharper9282 I used 3/4"long by 3/16"diameter because that is what I found in my stash. I imagine 1/4" diameter would work as well. BESURE TO USE LOCK NUTS so everything stays together.
Thanks Mike! Saved me a lot of trouble.
Same exact process for a Ford Ranger, Mercury Mountaineer or Mazda B-Series.
Extremely helpful. Replaced mine today. Thanks!
Hey 1A Auto- thanks for the clear directions. Followed your video step by step and managed to get it done in my XLT. It took me about 50 hits to punch out the rivets though. Whats up with pretending you did it in two shots?
:oD
Thanks again,
Phoo
this worked for my 2002 explorer sport, thanks
Literally the same vehicle I'm watching for
I just want to say, thank you!
+Angel Nieves Thanks for checking us out!
If you use a 1/4" drill bit, then turn it at an angle it stops the rivet from spinning. Then I'm using 1/4" Philips head screws and nuts but thanks this helped a lot.
+bigemakinit Thank you for your feedback!
ok ill give it a try these weekend thanks....
This is also applicable to 2001- 2005 Ford Explorer Sport/Trac trucks
I have a problem with my door handle breaking. I have bought 2 doors handles in the past month and it seems they are breaking because of the window regulator. When I installed the second one I realized it. The bulky part of the handle that holds the latch bar on the inside gets caught behind the top bar of the window regulator. Seems as though the window regulator should be somehow adjusted further out so that the handle won't get stuck and break. Is this possible? Manufacturer defect maybe?
I just ordered 4 exterior handles, I have one door in the back (drivers side) that will not open at all, outside handle is broke, inside has nothing it apears to be hooked to. What should I do, take out my seats to get panel off, do you have a video on taking out my seats... smiles, I love your videos... (2000 Ford Explorer)
Thank You for the video, it was helpful. It would have been nice had you shown some of those pesky details. I followed along with you step by step. But when I tested the handle it would not open. Not sure if someone tried to break into this truck or what. The owner did say that they had to pull really hard on the handle to open the door. Just below the yellow clip that you show in the video there is a connection, a tab. Took me a while to figure out it was bent down. As if someone had pulled really hard on the handle and bent it. Once I straightened it out the door opened like new. Not sure why but I was thinking your parts made out of metal. But then again Nothing screams Quality like a thin peace of plastic with some springs and for only $18, and you have to get your own nuts and bolts. You know how it is the handle breaks on a Sunday night and you got to go to work on Monday. So I get my KY jelly and headed down to the dealership, I knew what was coming. The guy said $48 bucks and change. I was Not looking forward to going there. But then he says he has to order it. I was some what relieved and disappointed I knew i could get it cheaper on line. But I did not want to have to wait. So for half the price even though I had to wait a week not a bad deal.
just wanr to say thabk yiu fof postubg this video i was able to put my handle on myself with your help. thank you
I'm bummed that I purchased the handle from Amazon, then when it arrived I discovered this video. I will absolutely bookmark 1aauto.com for the next part I need to order.
Great video, thanks for making it! When I got to the yellow clip thing my pliers and the yellow clip had an argument and the clip won. I found it easier to unclip using my fingers.
+Jim Schwarzbach Thanks for watching Jim. We carry the part shown in this video on our website with free shipping. Here's a link to them in case anyone would like to take a look at them. www.1aauto.com/exterior-door-handle/i/1adhe00178?CZcams&CTA%20Comment&ATony
I LOVVVVVVVE THIS VID BABYYYYY
Thanks a lot, really helpful.
Greetings from Chile.
+CRISTIAN KLAPP Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Thank you! Worked exactly as you showed!
+Papazooks Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/DoorHandleExterior/Ford/Explorer/1ADHE00178?CZcams&CTA+Comment&IrUfqKHGkQ
If you look at the clip it may just attach to the rod, some times they just clip on.
Thanks for your video help me replace door handle. But I can’t open the door so I adjusted the rod in three different places on that clip and it doesn’t make a difference where I clip it. It still doesn’t work now what
I am struggling with getting to the clip the slide thing moves very little. But, thank you for teaching me this, this is my first automotive repair!
thanks for you video very easy , gracias por su video muy facil de reparlo
Thanks for the video. I had to watch carefully to see if the window had to be up or down. I know common sense right. Wish i would have ordered through your company, because I had to go find bolts and locking nuts.
+Thomas Stout Live and learn, right? Thanks for watching! 1aauto.com?CZcams&CTA%20Comment&ATony 866-403-3393
Yes it does I have a 1996 and it worked the only difference was the door handle, make sure you buy a 1996 door handle instead of a 1997 which I did do on accident.
Your video was a great help. Thanks!
I enjoyed your video. It was very helpful. Thank you!
+RM Hutchins Thanks for watching and the great feedback. Have a great day! 1aauto.com
This video was very helpful. I'm now a subscriber
You may be able to pop in off of the rod with a flat head screw driver.
Thanks that helped a lot , considering the door handle cost $197 I used 1/4" x 3/4 ' long bolt ,with a Lock nut , and lock washer , and added thread lock also.
$197? 10 bucks on Amazon. Lol
VERY GOOD VIDEO TKS
+josefamixe Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
I think I am on my third drivers door handle-wish they were made out of something besides plastic, break easy when it is below zero.
I got my part in the mail, but was a little disappointed that it didn't come with the bolts and nuts as it appeared in the Video. Or at least they could of commented on the size in the video.Thank Anyways.
Got it fixed! thanks for the video!
You're welcome. Thanks for watching 1aauto.com
Very god vídeo thank yuo for yuo help. From México
+Miguel Angel Rodriguez Thanks for checking us out. 1aauto.com
Someone tried breaking into our Mountaineer with a screwdriver and broke off the handle. We replaced the handle per your instructions, though the door will still not open with the outside handle. When I move the clip up & down attached to the latch module, it appears to have spring tension, though it will not open the door. Do you have any suggestions? BTW - Thanks For The Great Video!!!
thank you for doing this video it helps.
Thank you for watching. Please let us know how the repair comes out!
1aauto.com 888-844-3393
Great video! Super helpful!
+Sofia Raab Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@Cristofre After reading some of the post I went and bought the nuts and bolts prior to getting my handles from "1aauto", they came with the nuts and bolts :-) really nice flat head black bolts painted black.
Update:we just istalled it with success it took us like 30 minutes,thanks again bro.....
GOOD JOB
+Danny S Hodges Thanks. 1aauto.com 866-403-3393
Wanted to give a huge thank you for a great video. Any advice on how to replace a handle if the door won't open?
Also video brother thank you all very much
Great informative video!
The ext door handles havethe places are one towards the front and one to rear a place to hook the rod which hole does it go in and what goes on the other side of the handle
Does the door handles come with the studs and nuts ordering them through you all?