I am a retired metal forger. One of the presses I had access to was 24,000 Tons. We also had a 12,500 and a 500. ton. One day I was exercising the 24 and decided to see what it would do to a wooden 4x4, it was about a foot long. It took down to just under a 1/4'' and then stoped. At this point I was dumbfounded I thought it would take down to paper thin. I was about to pull back on the control lever, and that is when the wood exploded. ( was now petrified) I was in a very large building by my self until the would explode. that is the exact time some of my superior’s come walking in the side door next to the large roll up door. A good size piece of the wood hit the roll-up door as they stepped in the building. There was a large bang at the roll-up door, next to them, they looked to see what the racket was, but the wood had ricocheted off in another direction. I pulled up on the lever, and removed the evidence promptly, they shrugged it off, know body was hurt, and this foolishness was never repeated again.
It must had been water in the wood who had becomes steam, which expands to 2,000 times the volume of it in the liquid state - so it was really a steam explosion.
that isn't how petrified wood forms (lithified through replacement mineral precipitation.) Basically the wood is replaced by crystalline minerals and becomes stone... which still preserves the original shape and detail of the original wood structure.
I would like to see what this looks like using a thermal camera. These steel and tungsten objects must get really hot when subjected to so much pressure.
It’s not the pressure it’s the friction from being reshaped. So the tungsten would not be very hot since it is not reshaped while the distorted steel would burn through plastic. To replicate it try hammering a nail into a knife
I google afterward.. I was expecting it to shatter because of the cold. It turns out the extreme cold actually makes steel stronger. Something about molecular bonds being harder to separate.
@@sshah2545the action lab has done a video on this. Actually the molecules come closer so the steel ball does become harder but it should also become more brittle, ie, it's tensile strength and malleability will decrease
@@sshah2545 When steel becomes harder, it also becomes more brittle. That's work hardening. You can create work hardening on a paperclip, i.e. bending it until it breaks.
Helps you appreciate how annealed roller bearings that the wheels of your car turn on are able to last through decades of shock & severe impact out on the road There will be examples of higher milage, but personally my mother's subaru reached 250,000 miles on the same wheel bearings before she sold the car. (A 1992 Loyale) A neighbor with an 80's Toyota truck reached 350,000 before he finally replaced the bearings during a brake job
There are different grades. Those seen were not actually "bearings" but "valves". Typically the ones used for load bearing are made of 455C steel and tempered to around 60 Rockwell (SUPER hard) Carbide ones go much higher and I suspect the one that broke his setup causing the crash was Carbide not Steel. The 455 one had to be the one that shattered at the start of the video.
Bearings are used in a insane amount of heavy machinery that require a lot of wear and put a lot of abuse on them. They can take a lot, like a lot, a lot.
The SpaceX Starship uses thinner stainless steel because the cryogenic cold fuel makes the steel stronger at very low temps. This is a great practical example.
This is actually a really good analogy for how enriched plutonium can go supercriticl when in a situation where the stresses keep exponentiating from further and further pressure, until the rate of the runaway react, or in this case the microcracking and deforming of the steel balls, goes from 0 to 10 to 10,000,000,000,000 in such a fast time that it appears to the outward eye like a singular instant explosion when in reality is a compounding mass failure of micro cracks and fails that happen millions of times in less than a second which has incredible force
Pois creio que após a expansão há o efeito de vácuo e por isso ocorreria uma descarga elétrica cujo pico um receptor de AM detectaria, pois relâmpagos são descargas térmicas instantâneas que causam o vácuo atmosférico cuja implosão de reação é o trovão.
As above so below. The smallest boom would seem nuclear in size if u were that small, and inversely if it was a real atom bomb size boom, if u were that small it would seem the same to u.
Love this video but I guess I missed the switch between the comparative 30mm and 80mm tungsten Bearings. And what materials are the top compression component made from?
O melhor vídeo de esmagamentos que eu já vi. Sempre me perguntei o quanto aguentariam esses materiais da prensa. E hoje vejo que também possuem o seu limite de resistência. Parabéns pela experiência. E espero que a câmera e a lente não tenham quebrado!
My eyes twitching and squinting while I'm watching this, like my brain thinks I'm in the same room and knows something is about to go BOOM CHAKA LAKA 😂
I cannot believe the 80mm ball split the plate you was crushing it on. The fact most of your press tools were split by these is a testament to how hard they are
Amazing! Commercial aircraft typically use only 3 super strong hydraulic jacks to lift an aircraft weighing in excess of 400,00 lbs without fuel, in this case DC-10, MD-11. With three separate support arms, with a center column supporting the load, there is only a very small point of contact, roughly 2.5 inches with a center pin in the middle.
The synchronicity of the music along with the sound of the actuality was so spot on to be noted you can put that press in a song in the fact that tungsten dented your press what is both to me fascinating and insane I did not know that
What do you mean don’t try this at home i just set up a 500 ton press in the living room do you know how long it took to convince the wife it was a functional piece of furniture 😂
The Tungsten was literally unbreakable under the 500 ton press, and went through the steel like butter. So was the 80mm ball, but that didn't put a literal gaping hole into it (the steel ball did too, but not nearly as much). I wonder just how much it would take to break Tungsten. I guess that's why they make military tanks out of the stuff
Putting the steel ball back into the press after the liquid nitrogen like "you're not getting away that easy!" And the ball being like "funny, I was going to say the same to you".
@jakefriesenjake Because the steel in ball bearings is so unbelievably hard it's a favorite for today's lunatic knife makers to make Damascus steel utilizing ball bearings among other things. If you haven't seen any of those videos I would highly recommend them. Think of it, turning Ultra hard steel ball bearings into knife blades that look like wood grain. If you've never seen Damascus steel you're missing something.
@@Smedley1947I collect knives and specialize in different types of steel. I use a dovpo straight razor to shave. Lol. I know steels. And tho those Damascus blades are pretty, it isn't true Damascus. Just saying, I wish they had used a different word for it to not confuse the types.
This experiment should be shown to the prosthetic hip industry. Perhaps it would help them better understand the best materials to use when manufacturing prosthetic hip components.
Interesting to me is that you seem to be able to handle all the pieces by hand after the press activity. I would think there would be a lot of heat generated by the process. Maybe some thing to add...
A lot of editing goes into the video, I'm sure they cut out what's probably at least several minutes of waiting for the stuff to cool down before handling it. I seriously doubt they go touch the stuff immediately.
Remember when cars and trucks were made of steel from front bumper to back bumper, the wheels were even steel the lug nuts were steel, I remember those days
I hope you don't mean what I think you mean. Otherwise technically it had all the same energy on it while pressed as when it burst. It just did not release any energy. Keep in mind when something that does not mean it heated up. Thats a chemical reaction not a physical one
@@aheadsounds2522pura Física, pois houve uma relaxação, e osciladores de relaxação têm esse princípio, mesmo tendo havido apenas um impulso ou ciclo na onda gerada. É tal como um monjolo, ou mesmo o rangir de uma porta, ou o eventual som do surto do crescimento de uma bananeira
The plastic sheets mounted on wooden frames used as blast shields are pretty cheap. That Nikon camera however is worth like 2000 euros. As an amateur photographer, my heart broke a little when i saw that camera... OOOF! Im glad he films in a warehouse and stays far away from the press studio. XD
Amazing how the explosion happened to unlock and rotate the lens off of the camera body without damaging any glass or the mount. More peculiar that it was revealed after an edit.
The cilindrical plates are made of high density steel which is why tungsten goes right through them. The plate that exploded was a piece of 10cm steel plate, but of a lesser density than the cilindrical plates. It looked a bit rusted so im guessing old steel from some factory.
>reads “do not try at home”
>sadly wheels 500 ton hydraulic press back into garage and closes door
Dang it😔😂
Yeah, they never let you do the fun stuff 😒
Oh, come on Wiley Coyote. That never stopped you before!🤭
>wheels 500 ton hydraulic press over to neighbor's house >:)
🥺
Reporter: "Do you take steroids?"
80mm steel ball bearing: "I don't juice. Just exercise, good eating, and sleep. Sometimes take a cold shower."
This reads like a Plants vs Zombies almanac entry lol
@zer0_creativity "I'm not bragging, run the numbers, you'll see."
Just do your homework and eat your vitamins, brother!
@@zer0_creativity This is just the Football Zombie's almanac entry tbh.
Just chicken, rice, broccoli and discipline
I love the warning at the beginning. "Don't try this at home", Yeah, because everyone has a 500 ton press in their home!
😂😂👊
Actually, you'd be surprised.....
Mine only goes to 300 tons.
I do every time my mother in law visits.
Hospitals would be overflowing with I was Stupid cases.
Bro Lost His Studio Just To Break Balls 💀💀
😂😂💀
haha true! 😁😁❤❤👌👌
FR
Ayo Pause lol
Lmfao
I am a retired metal forger. One of the presses I had access to was 24,000 Tons. We also had a 12,500 and a 500. ton. One day I was exercising the 24 and decided to see what it would do to a wooden 4x4, it was about a foot long. It took down to just under a 1/4'' and then stoped. At this point I was dumbfounded I thought it would take down to paper thin. I was about to pull back on the control lever, and that is when the wood exploded. ( was now petrified) I was in a very large building by my self until the would explode. that is the exact time some of my superior’s come walking in the side door next to the large roll up door. A good size piece of the wood hit the roll-up door as they stepped in the building. There was a large bang at the roll-up door, next to them, they looked to see what the racket was, but the wood had ricocheted off in another direction. I pulled up on the lever, and removed the evidence promptly, they shrugged it off, know body was hurt, and this foolishness was never repeated again.
Are you 'retired' now because you sold one of your forgeries to a prominent Museum and you were apprehended when they tested it.?
So petrified wood is just wood under extreme pressure. That explains all the modern petrified artifacts from the mud flood
It must had been water in the wood who had becomes steam, which expands to 2,000 times the volume of it in the liquid state - so it was really a steam explosion.
that isn't how petrified wood forms (lithified through replacement mineral precipitation.) Basically the wood is replaced by crystalline minerals and becomes stone... which still preserves the original shape and detail of the original wood structure.
nobody*
That 500 ton press is amazing. Yet it doesn't stand a chance against a 3 day old McDonalds french fry.
Your right
I bet that hydraulic press would stop existing if it ever came into a 5 foot radius of a 3 day old McDonald French fry
Or my girlfriends muffins!
That's not McDonald's, it's pure diamond right there 😮
Imagine the potatoes in your house there too. hahahaha
6:03
Tungsten ball: CALL AN AMBULANCE!!! ...BUT NOT FOR ME!!!!
💪🤏
Dude, if you keep doing tests like this, you're going to create a black hole in the world.
no.
You need to implode a star for that
@@ifstatementifstatement2704 Next Video: *Hydraulic Press vs Star.*
I thought that anything could theoretically create a black hole if compressed enough
He need to be sponsored
I’ve been wasting my life on CZcams for years.
That was one of the more incredible things I’ve ever seen..
I feel you. It was all worth it.
That's experience
Anyone else squinting their eyes?
nope
@@Zerrow_nighttttt 🏅
@@durango.j-onezwth
No I put safety glasses before watching
@@vihuelero1001 clever
The hydraulic press: “I’m tired boss.”
I would like to see what this looks like using a thermal camera. These steel and tungsten objects must get really hot when subjected to so much pressure.
You mean under suspicious circumstances
Até um gás se aquece na compressão @@Rocket351
Maybe some contact metamorphism.
It’s not the pressure it’s the friction from being reshaped. So the tungsten would not be very hot since it is not reshaped while the distorted steel would burn through plastic.
To replicate it try hammering a nail into a knife
Well get yourself a thermal camera and 500 ton press and start. Channel. Lol
30mm steel: “Oh noes I broke” 😭
80mm steel: *I don’t think so.*
80mm steel after 20 minute liquid nitrogen bath: *I'm still standing, yeah, yeah, yeah!*
Brick underneath: "Oh noes now * I * broke" TT_TT
@@Echo81Rumple83 That "brick" was a chunk of AR500 hardened steel.
Yall cringe
@@Real_uMMActually your single comment calling them cringe is 12 times more cringe than anyone else here
@Real_uMMActually ur ghey
Didn't know there were so many ways to destroy a hydraulic press! 🤣
😆😆
Bro, you’re lucky it’s just the studio. If the 80mm steel ball slips, that’s basically an 80mm ballistic bullet goes straight to you.
Or in some other direction: it's got a lot of directions to choose from :)
Vdd
@@DieFlabbergast But if it chose him. He would literally have the ball go right through him and crush the bones it touched
If it slips😂
It would open a hole on the wall
I only use my 500 ton press for cracking walnuts.
I use a metal nut cracker with the force of my hands to do that
And make walnut butter
That takes busting a nut to a whole new level
Court ordered?
I use it to crack Pistachios 😛
That ball really said: “it’s Opposite Day >:)” to the studio and the camera💀
Tungsten carbide: "You don't wanna mess with me son."
4:08 To think, even after being dipped in _liquid nitrogen,_ the 80 mm steel ball _still survived._
I google afterward.. I was expecting it to shatter because of the cold. It turns out the extreme cold actually makes steel stronger. Something about molecular bonds being harder to separate.
@@sshah2545the action lab has done a video on this. Actually the molecules come closer so the steel ball does become harder but it should also become more brittle, ie, it's tensile strength and malleability will decrease
@@sshah2545outros objetos seriam quebradiços então há algo de resistência negativa
Terminator 2 lied to us!
@@sshah2545 When steel becomes harder, it also becomes more brittle.
That's work hardening.
You can create work hardening on a paperclip, i.e. bending it until it breaks.
I find it funny how attempting to crushing certain strong metals breaks the hydraulic press and/or the stand instead.
I knew steel bearings were strong but i never imagined they'd survive this amount of abuse.
Depends where the steel balls are made
Helps you appreciate how annealed roller bearings that the wheels of your car turn on are able to last through decades of shock & severe impact out on the road
There will be examples of higher milage, but personally my mother's subaru reached 250,000 miles on the same wheel bearings before she sold the car. (A 1992 Loyale) A neighbor with an 80's Toyota truck reached 350,000 before he finally replaced the bearings during a brake job
There are different grades.
Those seen were not actually "bearings" but "valves".
Typically the ones used for load bearing are made of 455C steel and tempered to around 60 Rockwell (SUPER hard)
Carbide ones go much higher and I suspect the one that broke his setup causing the crash was Carbide not Steel. The 455 one had to be the one that shattered at the start of the video.
Bearings are used in a insane amount of heavy machinery that require a lot of wear and put a lot of abuse on them. They can take a lot, like a lot, a lot.
@@AlexBrown230 Fafnir are lifetime
This is what happens when unstoppable force meets immovable object
No. Something always gave way.
@@chrisatkins7959 Yes, everything else.
Lol, this guy literally has balls of steel
The SpaceX Starship uses thinner stainless steel because the cryogenic cold fuel makes the steel stronger at very low temps. This is a great practical example.
That's actually what I was immediately wondering about. I thought the temperatures would make it more brittle.
@@Jake1702 y es mas frágil, mas duro y mas frágil. Lo opuesto a la fragilidad es ductilidad, no dureza.
A shame Elon won't ever get to Mars.
This is actually a really good analogy for how enriched plutonium can go supercriticl when in a situation where the stresses keep exponentiating from further and further pressure, until the rate of the runaway react, or in this case the microcracking and deforming of the steel balls, goes from 0 to 10 to 10,000,000,000,000 in such a fast time that it appears to the outward eye like a singular instant explosion when in reality is a compounding mass failure of micro cracks and fails that happen millions of times in less than a second which has incredible force
Great comment,never read many that are really worth reading 👌👌👌
Much appreciated my good friend!@@stephengeraghty3368
Pois creio que após a expansão há o efeito de vácuo e por isso ocorreria uma descarga elétrica cujo pico um receptor de AM detectaria, pois relâmpagos são descargas térmicas instantâneas que causam o vácuo atmosférico cuja implosão de reação é o trovão.
As above so below. The smallest boom would seem nuclear in size if u were that small, and inversely if it was a real atom bomb size boom, if u were that small it would seem the same to u.
Tha Man of Steel now has a stronger Challenger .... The Man of Tungsten 🤫
This gives "you have balls of steel" a whole new meaning.
7:24
I love how it looks like there's no resistance at all. Just goes in smoothly with zero slowing or struggle.
your tests are amazing.
we use the same system in our concrete block machines to press mortar and shape it to molds. our pressure is maximum 200 bars.
200 bar ~= 2900 psi
Thank you for showing us the metal strength and breaking points. More power to you. 👍👍👍
Wow that was epic, glad u had the countdown my nerves were going haywire
Love this video but I guess I missed the switch between the comparative 30mm and 80mm tungsten Bearings. And what materials are the top compression component made from?
O melhor vídeo de esmagamentos que eu já vi.
Sempre me perguntei o quanto aguentariam esses materiais da prensa. E hoje vejo que também possuem o seu limite de resistência.
Parabéns pela experiência. E espero que a câmera e a lente não tenham quebrado!
"Do not repeat at home"!?! Who in Hell has a 500-ton press in their house?
My eyes twitching and squinting while I'm watching this, like my brain thinks I'm in the same room and knows something is about to go BOOM CHAKA LAKA 😂
Glad I wasn’t the only one.
I cannot believe the 80mm ball split the plate you was crushing it on. The fact most of your press tools were split by these is a testament to how hard they are
Wow, how crazy?!! Incredible. Love this
Me gustan mucho sus videos. Por favor siga haciendo más y más. Para mí es muy relajante verlos
Very informative to know how those materials will react under such conditions in relation to each others
What is the piston and block made of? What is it’s hardness? If seems unphased by 150tons.
The hydrolic press has met it's match and then some!
Amazing! Commercial aircraft typically use only 3 super strong hydraulic jacks to lift an aircraft weighing in excess of 400,00 lbs without fuel, in this case DC-10, MD-11. With three separate support arms, with a center column supporting the load, there is only a very small point of contact, roughly 2.5 inches with a center pin in the middle.
Ty. No one actually compared what 500ton lbs actually equals out too. Lol, kinda like Americans like to compare things to football fields.
The synchronicity of the music along with the sound of the actuality was so spot on to be noted you can put that press in a song in the fact that tungsten dented your press what is both to me fascinating and insane I did not know that
I like this video on how to break your tool the pro way !!!
Holy crap! I think you just made an earthquake! 😲
What do you mean don’t try this at home i just set up a 500 ton press in the living room do you know how long it took to convince the wife it was a functional piece of furniture 😂
The Tungsten was literally unbreakable under the 500 ton press, and went through the steel like butter. So was the 80mm ball, but that didn't put a literal gaping hole into it (the steel ball did too, but not nearly as much). I wonder just how much it would take to break Tungsten. I guess that's why they make military tanks out of the stuff
Putting the steel ball back into the press after the liquid nitrogen like "you're not getting away that easy!"
And the ball being like "funny, I was going to say the same to you".
I was surprised when the first steel bearing shattered. I predicted it would flatten. I think the ceramic bearing surprised me the most!
Ultra hardened tool steels don't flex, they break.
@jakefriesenjake
Because the steel in ball bearings is so unbelievably hard it's a favorite for today's lunatic knife makers to make Damascus steel utilizing ball bearings among other things. If you haven't seen any of those videos I would highly recommend them. Think of it, turning Ultra hard steel ball bearings into knife blades that look like wood grain. If you've never seen Damascus steel you're missing something.
@@Smedley1947 oh I've seen my share of knife making vids. They are beautiful.
@@Smedley1947I collect knives and specialize in different types of steel. I use a dovpo straight razor to shave. Lol. I know steels. And tho those Damascus blades are pretty, it isn't true Damascus. Just saying, I wish they had used a different word for it to not confuse the types.
What kind of heat temperatures when the objects are forced together by the press?
I know a hero when I see one
Not even a word spoken during the video
Letting us take it all in by ourselves
Probably the greatest thing I've ever watched
4:00 PLOT TWIST
Love this channel and their videos!
This experiment should be shown to the prosthetic hip industry. Perhaps it would help them better understand the best materials to use when manufacturing prosthetic hip components.
6:07
What kind of ball is that??? Its destroying the 500 ton press!!!!!!!!!!!!!!!!!!!!
pretty sure it's tungsten
Yeah, the press is no match for tungsten, quite literally the strongest metal.@@yannbardet8265
Try doing a Christmas tree under a big press for the holidays!
Insane to think how dangerous these experiments can be. Great way to meet your maker.
They used to coat tank shells in tungsten to increase their penetration. None of that shocked me, but the steel ball bearing did.
your commitment to break balls is truly amazing and inspirational
🤨
Interesting to me is that you seem to be able to handle all the pieces by hand after the press activity. I would think there would be a lot of heat generated by the process. Maybe some thing to add...
The workpieces are fairly large, and therefore able to absorb a fair amount of heat.
A lot of editing goes into the video, I'm sure they cut out what's probably at least several minutes of waiting for the stuff to cool down before handling it. I seriously doubt they go touch the stuff immediately.
Great educative video. Thank you👍🏻 I think Its the time to update your equipments!👌🏻
This channel keeps getting crazier.
That heavy metal sounds so friggin metal, dude!
Can you get your hands on some depleted uranium? I'm sure you must have some laying around somewhere XD
Here in 1955 it’s a little hard to come by…
6:04 bro really said "It's already broken, what do I have to lose at this point?"
Can you smoosh metal/s together until they're same frequency resonance as ultra violet light?
How much did this entire "test" cost you?
yes
Almost a supernova. 😂 Epic! Hope your studio is OK.
That was a real ball buster. Ive never seen a thick piece of steel blow apart like that.
The video that I didn't know that I need to watch. Thanks to the algorithm. I am impressed.
That was awesome bro!
Holy shit!! Did not expect that
Epic doesn't even come close to describing THAT. Holy carp!
Remember when cars and trucks were made of steel from front bumper to back bumper, the wheels were even steel the lug nuts were steel, I remember those days
You do good work.
True! 💙💙😉😉❤❤
After 6:16, I think you're going to need a new press.
500 ton press: tungsten carbide, I will crush you!!
TC: haha that's adorable bud, have fun playing!
Holy shit.
That 80mm steel was super dangerous.
That feeling of it will explode in your face in any moment.
It's seems like you're pretty familiar with that feeling lmao
That big steel ball chilled released a lot of energy when it burst.
The steel ball was intact. The 10 cm steel plate under it is what broke into pieces and damaged the studio.
I hope you don't mean what I think you mean. Otherwise technically it had all the same energy on it while pressed as when it burst. It just did not release any energy. Keep in mind when something that does not mean it heated up. Thats a chemical reaction not a physical one
@@danielciocilteu3545 I thought it was a brick?
@@aheadsounds2522pura Física, pois houve uma relaxação, e osciladores de relaxação têm esse princípio, mesmo tendo havido apenas um impulso ou ciclo na onda gerada. É tal como um monjolo, ou mesmo o rangir de uma porta, ou o eventual som do surto do crescimento de uma bananeira
Ok, CZcams algorithm HAS to be reading my mind. I was just thinking that I haven’t seen a hydraulic pressure video in forever.
Holy mackerel! This was amazing. I can't imagine how much this probably costs.
Be that hard that nothing can press you down,instead break up who press you down💪🏻
Btw how did such motivation came in my mind idk😂😂
Phenomenal, broke the block!
3:55
Steel Ball: "And I won't watch this ANYMORE! HYAAAAH!!"
Hope it was not too expensive to replace the camera and tools!
The plastic sheets mounted on wooden frames used as blast shields are pretty cheap. That Nikon camera however is worth like 2000 euros. As an amateur photographer, my heart broke a little when i saw that camera... OOOF!
Im glad he films in a warehouse and stays far away from the press studio.
XD
@@danielciocilteu3545 He told he had to replace only lenses. Body was ok
Amazing how the explosion happened to unlock and rotate the lens off of the camera body without damaging any glass or the mount. More peculiar that it was revealed after an edit.
@@digitalthrills in russian version of this video he told the way it had happened
Water balloons. Air balloons. Coffee Tumblers. Multi tools.
Dips 80 mm steel ball into liquid nitrogen.
Steel Ball: So you've chosen death for your little toy.
You should do a collaboration with the slowmo guys.
Tungsten press with a tungsten ball with a tungsten stand. Unstoppable force vs immovable object. PLEASE I BEG OF THEE
If a man has [balls] of steel, nothing can break him.
This does give new meaning to "got my balls in a vise."
Ele é o Clark Kent mas é segredo.
After the 80mm steel ball, they be like, "...imma stick to Skittles from now on." 😂
Ok, whats the second song that drops? It's pretty awesome! Also, i cant believe how your studio almost exploded on the frozen 80mm steel ball.
Different types of rocks.
Very nice 👍🎉❤❤
I agree! ❤❤❤❤😉😉👌👌
@@FurryAnimator thanks 😍🙏🤩😘😘🌹
I think the lesson of this is that your stencils should always be made from a material that is harder then the object being crushed.
What alloy are the black/yellow parts and the unpainted block that exploded under the chilled ball?
Interesting videos, thanks!
The cilindrical plates are made of high density steel which is why tungsten goes right through them. The plate that exploded was a piece of 10cm steel plate, but of a lesser density than the cilindrical plates. It looked a bit rusted so im guessing old steel from some factory.
The ball lost its bearings
500t mehr kann die Presse nicht 😅
Es muss eine größere her!😊
Translation please