When you select "Remote volume: Level", to link the volume level to the ACR-3 knob, and you have multiple output channels selected to use the Remote, does it adjust the level proportionally when you move the knob? For example, channel 1-2 is set to 50% level, and 3-4 is set to 100% level. Then you enable "Remote volume level" to allow the knob to control both channels. When you turn the knob all the way up, does it set the channel 1-2 signal to 100%, or does it proportionally adjust volume, not allowing it to go over the 50% you had set previously? Basically, I have a SPDIF signal coming in with no volume control, and want to make front speaker outputs quieter than my subwoofer output, but still be able to control all of it proportionally with the knob. I don't ever want the front speaker outputs going over 50% because that would either make it sound bad, or blow the speakers entirely.
If the 810 don't power on ive had it for 2yrs I hadn't updated the software ,would that be an issue for it not turning on..apreaciate any input u may have. Thanks
Hello. I have a volvo xc70 2015 that amplifies and DAB. radio is under front car seat. There is no aux sound out and holes from the engine are on the same side. I need to convert speaker out to RCA. Both speaker cable and power will go on the same side. Do I need to use shielded speaker cable to avoid noise and interference ??
When you select "Remote volume: Level", to link the volume level to the ACR-3 knob, and you have multiple output channels selected to use the Remote, does it adjust the level proportionally when you move the knob?
For example, channel 1-2 is set to 50% level, and 3-4 is set to 100% level. Then you enable "Remote volume level" to allow the knob to control both channels. When you turn the knob all the way up, does it set the channel 1-2 signal to 100%, or does it proportionally adjust volume, not allowing it to go over the 50% you had set previously?
Basically, I have a SPDIF signal coming in with no volume control, and want to make front speaker outputs quieter than my subwoofer output, but still be able to control all of it proportionally with the knob. I don't ever want the front speaker outputs going over 50% because that would either make it sound bad, or blow the speakers entirely.
If the 810 don't power on ive had it for 2yrs I hadn't updated the software ,would that be an issue for it not turning on..apreaciate any input u may have. Thanks
Hello. I have a volvo xc70 2015 that amplifies and DAB. radio is under front car seat. There is no aux sound out and holes from the engine are on the same side. I need to convert speaker out to RCA. Both speaker cable and power will go on the same side. Do I need to use shielded speaker cable to avoid noise and interference ??
I need the next video
👍