Draw is pretty neat, you can swipe from end to end to “draw” your signal in more of a flow than changing each individual HZ. The auto feature is pretty cool too.
I know this is a old video but I just got a Mobridge Da2 to pick up the signal in my 2014 Audi S6. Then I have the 608 cleaning it up. The first thing I have to say is that I learned more listening to your video then the pro explaining it on a different channel. Thanks you cleared up some questions I had
Thanks for the vid!! Quick and simple. I have a DM608 going in a GMC Terrain. Going to put it in this week. I got some time off of work to get it all put in.
Great and informative video. I will be using your video to setup my system. I have a DM-810 with the BT-24 (Bluetooth Dongle). I'll be installing it in a 2013 Chrysler 300C that came with the Alpine System. Replacing everything factory except 8.4" UConnect Head unit. Kicker 3 1/2s front dash L/R & rear doors L/R............................................Kicker Key 200.4 Amp. Kicker 6x9 Components front door L/R......................................................Kicker 360.4 Amp (Bridged). Kicker 6x9 rear deck L/R............................................................................Kicker 360.4 Amp (Bridged). Kicker Solo Baric L7S in a pre-fab enclosure from Ground Shaker...............Kicker 1800.1 Amp (Bridged).
I might have to adjust mine to 12db. Whenever I'd adjust the output summing to max, my speakers weren't sounding too good. I also noticed in the output section RTA EQ, where it says RTA Memories, Audio Control has a preset in there to go off of for tuning.
Is having a dsp worth the money? How would affect your system? Am indecisive on the audio control d 6.1200 or audison sr 4300 and a sr 1200 or even the lc 5.300 is just a regular 5 channel amp from audio control. Any in put or advise?
100% is worth it if you're going to take the time to utilize it. I'll never have one in my car or in my house. Especially if your car forces you to use the stock head unit
Heh Kpaceguy. Thanks much for this detailed informative video. One thing I wanted to know, on your video at the 13.30 time you mentioned that you have to either set you DSP or your amp, which I would assume everyone would be setting their DSP. What settings should the amps be adjusted to then, if not the identical as the DSP? I would have thought that you would have to repeat the identical crossover settings etc as on the DSP. Regards and thanks, Randy
Set the crossover on the dsp to whatever you find ideal and set the amp crossover all the way to Max or the highest frequency applicable so that it's well above the crossover set in the dsp and it has no influence on the sound. You're essentially turning the amp crossover to off or bypass
No. The dsp has a clip indicator for the gain so you can turn that as loud as you want before it clips the signal and then you can turn up your amps after that. But I leave mine on 0 gain.
Well explained, I corrected many settings with I/O and AccuBass after your video, keep it up Bro I comment under the video with the challenge I have, maybe you could jump in and help me out? lol.
@@Kpaceguy It's kinda complicated lol. I got a stock HU and have 4 different Amp's going to DM-608 + the EpicCenter pushing the Sub, I would have to take pictures to show you the setups, too much typing. I don't have your instagram or FB
What dB's do you have set on your Input channels? Mine are all the way up to +12 dB therefore my Front and Rear Outputs are at -6 dB. I don't have good linearity control with my Bass knob so I will have to reduce my Line Out to -3 dB. For some reason when I set my Input Gains at 0.00 virtually no signal was reaching my bridged Subwoofer Amp.
@@Kpaceguy That is ideal, but for my set up it doesn't work unless they are all the way up and then reducing it on the Output side. You must have a 5V or higher Aftermarket Head Unit. I am using my Factory head Unit that is probably between 1.5 and 2V. Is that why my Input gain has to be all the way up?
Thanks for the informative videos! I just got finished wiring my 608 to the stock base head unit in my base Mustang. Confused as to how I can make the pink noise to begin to set it up. I don’t have a cd player in the car. Thanks for any advice 😊
Great Video, How do I set up using the low level inputs(RCA) from after market head unit? I have 2 front tweeters, 2 mids and 2 rear 2-ways. I have the Audiocontrol D-6.1200. Thanks!
Yes. My speakers are rated around 50hz. I like to get as much midbass from my door speakers as safety possible and then keep a lower crossover on my sub so that its my boomy and I don't use a lot of power to the sub that my door speakers can do for me. Keep my low notes loud and my midbass smooth
I appreciate you sir. Nice video. I’m waiting on my 810 to arrive. I assume I won’t need to buy the Bluetooth adapter to connect to it? I just install and then I can download app and connect right? Lol thanks keep ‘em coming!
He y man I have the DM-608 and on the sub end I have the EQ up to +12db on 25hz, 31.5hz, 40hz. Then between 50hz, 63hz, and 80hz it ranges between +6-9db. Should I lower the first three or get them all closer to flat? Thanks in advance for the help
I have my Sub Output Summing set at -6.0dB and my Accu-BASS Level all the way up to the right but haven't messed with the Threshold because I don't know if I need to mess with it or what it will do. Will lowering the Accu-Bass Level give me more linearity in my Bass Knob and what do you advise to do with the Threshold? FYI: I have a Rockford Fosgate R500X1D Amp with the gain set at 1 of 11.
@@Kpaceguy The threshold was all the way to the left and the Accubass was all the way to the right. By sliding the Accubass to the left the bass (boost) goes down.
@mohammadwong mono sums all the bass each speaker plays and plays it all at once vs putting it in stereo and it only plays bass when the left speaker or right speaker has that same Information
k so you know about the firmware update and updating the drivers, there's also downloading the correct version; I have found 4 so far (HOW?), and making sure you have the CORRECT micro usb cord, MANY DON'T WORK! I cannot get my dm-810 to recognize any incoming signal, had many problems getting it to connect to my computer, had the green light at the top right of the screen even at one point but no signal showing on the DSP software. Im unsure of what and where to download the correct version of the software is my biggest problem. their audiocontrol website software download is no good, dont think it s the right version.
I have a audicontrol d 4-800 with dsp and 1 audiocontrol 1500 for subdwofeer installed on a silverado 2016 single cab it sound good inside the truck but I can't make it sound loud outsite of the truck, what can I do if you could help I will appreciate that thanks
🤔, I have too many questions, not for what you just shared, about the steps that are required that gets you to what you are showing us. Whats your speaker setup(Front stage/ R.S. etc)? Let me go checkout the Rest of your videos, and then chat.
Draw is pretty neat, you can swipe from end to end to “draw” your signal in more of a flow than changing each individual HZ. The auto feature is pretty cool too.
I know this is a old video but I just got a Mobridge Da2 to pick up the signal in my 2014 Audi S6. Then I have the 608 cleaning it up. The first thing I have to say is that I learned more listening to your video then the pro explaining it on a different channel. Thanks you cleared up some questions I had
I forgot what my second point was but anyway awesome video. Thanks God bless
I appreciate it thank you
I wish this video was out a year ago I had to figure out my d61200 out on my own. Very good explanation.
Planning on getting the DM-810 Myself.
Thanks for making this video. I just got my dsp installed and now its time for tuning.
Thanks for the vid!! Quick and simple. I have a DM608 going in a GMC Terrain. Going to put it in this week. I got some time off of work to get it all put in.
Thanks for watching!
Great and informative video. I will be using your video to setup my system. I have a DM-810 with the BT-24 (Bluetooth Dongle). I'll be installing it in a 2013 Chrysler 300C that came with the Alpine System. Replacing everything factory except 8.4" UConnect Head unit. Kicker 3 1/2s front dash L/R & rear doors L/R............................................Kicker Key 200.4 Amp.
Kicker 6x9 Components front door L/R......................................................Kicker 360.4 Amp (Bridged).
Kicker 6x9 rear deck L/R............................................................................Kicker 360.4 Amp (Bridged).
Kicker Solo Baric L7S in a pre-fab enclosure from Ground Shaker...............Kicker 1800.1 Amp (Bridged).
Thanks for watching
You are extremely articulate, Sir. Thank you for producing this! I just need to watch it a few hindered times and will be good to go!
I appreciate it
I might have to adjust mine to 12db. Whenever I'd adjust the output summing to max, my speakers weren't sounding too good. I also noticed in the output section RTA EQ, where it says RTA Memories, Audio Control has a preset in there to go off of for tuning.
Is having a dsp worth the money? How would affect your system?
Am indecisive on the audio control d 6.1200 or audison sr 4300 and a sr 1200 or even the lc 5.300 is just a regular 5 channel amp from audio control. Any in put or advise?
100% is worth it if you're going to take the time to utilize it. I'll never have one in my car or in my house. Especially if your car forces you to use the stock head unit
Heh Kpaceguy. Thanks much for this detailed informative video. One thing I wanted to know, on your video at the 13.30 time you mentioned that you have to either set you DSP or your amp, which I would assume everyone would be setting their DSP. What settings should the amps be adjusted to then, if not the identical as the DSP? I would have thought that you would have to repeat the identical crossover settings etc as on the DSP. Regards and thanks, Randy
Set the crossover on the dsp to whatever you find ideal and set the amp crossover all the way to Max or the highest frequency applicable so that it's well above the crossover set in the dsp and it has no influence on the sound. You're essentially turning the amp crossover to off or bypass
@@Kpaceguy thanks much. Please keep up the great work
I'm running optical will that have any issues since I don't have individual inputs?
@Kpaceguy, does this include the gain/ level as well on the DM 810?
No. The dsp has a clip indicator for the gain so you can turn that as loud as you want before it clips the signal and then you can turn up your amps after that. But I leave mine on 0 gain.
Well explained, I corrected many settings with I/O and AccuBass after your video, keep it up Bro
I comment under the video with the challenge I have, maybe you could jump in and help me out? lol.
I appreciate it. I don't see your other comment
@@Kpaceguy It's kinda complicated lol. I got a stock HU and have 4 different Amp's going to DM-608 + the EpicCenter pushing the Sub, I would have to take pictures to show you the setups, too much typing. I don't have your instagram or FB
@@Infidel67 my first question is why do you have an epicenter
@@Kpaceguy I had it hooked up to my DQ-61 before I had the DM608 its in a 2011 Camaro SS where I have the sub a Skar VXF12"
@@Kpaceguy Are you saying that with the DM-608 I don't need the Epicenter?
Well done! Easy to understand. Thanks!
Thanks for watching
What dB's do you have set on your Input channels?
Mine are all the way up to +12 dB therefore my Front and Rear Outputs are at -6 dB. I don't have good linearity control with my Bass knob so I will have to reduce my Line Out to -3 dB.
For some reason when I set my Input Gains at 0.00 virtually no signal was reaching my bridged Subwoofer Amp.
Everything is at 0 gain
@@Kpaceguy That is ideal, but for my set up it doesn't work unless they are all the way up and then reducing it on the Output side.
You must have a 5V or higher Aftermarket Head Unit. I am using my Factory head Unit that is probably between 1.5 and 2V.
Is that why my Input gain has to be all the way up?
@@TomTom-gn9mp my head unit is factory but yes you have a low voltage output radio. You can get a high output converter that will completely fix that
@@Kpaceguy Is the high output converter built into the DSP?
@@TomTom-gn9mp no
Thanks for the informative videos! I just got finished wiring my 608 to the stock base head unit in my base Mustang. Confused as to how I can make the pink noise to begin to set it up. I don’t have a cd player in the car. Thanks for any advice 😊
Bluetooth from CZcams or an app
@@Kpaceguy Thanks! Have a great day!
What's the purpose of bar speed?
Shouldn't the bars move as fast as the noise played?
No the slower the Bars move the easier to read what's going on
You did a great job on this video bro! Thanks!
I appreciate it
excellent explanation bro i'll be ordering this dsp soon
I appreciate it
Great Video, How do I set up using the low level inputs(RCA) from after market head unit? I have 2 front tweeters, 2 mids and 2 rear 2-ways. I have the Audiocontrol D-6.1200. Thanks!
Plug them up to your amplifier
Hey,
I was wondering is there a reason you choose to crossover on the low end at 65hz instead of 80hz?
Yes. My speakers are rated around 50hz. I like to get as much midbass from my door speakers as safety possible and then keep a lower crossover on my sub so that its my boomy and I don't use a lot of power to the sub that my door speakers can do for me. Keep my low notes loud and my midbass smooth
if you use the 12db on the dsp, how do you turn it off on the amplifier?
When you get a chance can you do a vid for those of us who like to listen to R&B and HipHop or should I use auto mode and tweak it from there?
Yes you can do that.
I appreciate you sir. Nice video. I’m waiting on my 810 to arrive. I assume I won’t need to buy the Bluetooth adapter to connect to it? I just install and then I can download app and connect right? Lol thanks keep ‘em coming!
You can buy it if you want to make quick changes on your phone but I could never get mine to work
@@Kpaceguy so I just ordered the BT24 adapter for dsp and you’re saying you couldn’t get it to connect to use the phone app?!?! 😅😅 wth AudioControl!
@@Kpaceguy ok so they just did an update December 6th to fix the issue. So it should work if you update your software!
He y man I have the DM-608 and on the sub end I have the EQ up to +12db on 25hz, 31.5hz, 40hz. Then between 50hz, 63hz, and 80hz it ranges between +6-9db. Should I lower the first three or get them all closer to flat? Thanks in advance for the help
Do what sounds good to you but it's typically better to lower frequencies than to boost them do adjust your gains accordingly
Hello I have a d 6 1200 In factory audio but I have a some noise went the car is running.I install noise filter but the noise it’s still there
It's in mine too. You can open it up and switch some relays to help. Call audio control and they'll Advice you
How the rta work u play it from your source unit u using a mic or just pink noise on your source unit
Pink nose from unit
OK thanks man
I'm going to get the dm-608 I have 4 ch stock radio to a 5 ch amp will this work, can it make 4 ch to 5 ch by copying 3-4 to make a subwoofer channel?
Correct
I have my Sub Output Summing set at -6.0dB and my Accu-BASS Level all the way up to the right but haven't messed with the Threshold because I don't know if I need to mess with it or what it will do. Will lowering the Accu-Bass Level give me more linearity in my Bass Knob and what do you advise to do with the Threshold?
FYI: I have a Rockford Fosgate R500X1D Amp with the gain set at 1 of 11.
It won't work without the threshold so you essentially did nothing
@@Kpaceguy The threshold was all the way to the left and the Accubass was all the way to the right. By sliding the Accubass to the left the bass (boost) goes down.
@@TomTom-gn9mp but if your threshold is wrong it won't trigger the level you set
Are you using the bluetooth streaming/programming option?
Nope it was way too inconsistent for me
Great video! Thanks.
Thanks for watching
Great video!!
I appreciate it
Thanks for the Project Lexus Series! Makes me wanna tackle mine one day
Definitely go for it
For my subwoofer i use 1-2 and in output config i can select mono when i do that it brings the bass stage more forward ? Should i use that ?
Yes it should be in mono
@@Kpaceguy aha can you enlighten me as to why just to learn
@mohammadwong mono sums all the bass each speaker plays and plays it all at once vs putting it in stereo and it only plays bass when the left speaker or right speaker has that same Information
@@Kpaceguy appreciate it make sense now !!
k so you know about the firmware update and updating the drivers, there's also downloading the correct version; I have found 4 so far (HOW?), and making sure you have the CORRECT micro usb cord, MANY DON'T WORK! I cannot get my dm-810 to recognize any incoming signal, had many problems getting it to connect to my computer, had the green light at the top right of the screen even at one point but no signal showing on the DSP software. Im unsure of what and where to download the correct version of the software is my biggest problem. their audiocontrol website software download is no good, dont think it s the right version.
Delete all your versions and delete the app and start from scratch
I have a audicontrol d 4-800 with dsp and 1 audiocontrol 1500 for subdwofeer installed on a silverado 2016 single cab it sound good inside the truck but I can't make it sound loud outsite of the truck, what can I do if you could help I will appreciate that thanks
Why do you want that?
@@Kpaceguy I want to make it sound outside, If I close the door it sounds like a regular radio with no amps
@@Q123X that's just how acoustic work.
@@Kpaceguy oh I see thank you for fast repley nice videos 👍
Having trouble setting input output gains with this amp maybe I just don’t understand somebody please help
🤔, I have too many questions, not for what you just shared, about the steps that are required that gets you to what you are showing us. Whats your speaker setup(Front stage/ R.S. etc)? Let me go checkout the Rest of your videos, and then chat.
You can watch the "project lexus" playlist. Shows the car start to finish
U never linked the video on the description bro! 😉
Which video did I say I was linking? Lol
@@Kpaceguy setting accubass
czcams.com/video/utaoe0_VVpA/video.html
What did you summon, Bahamut?
Quick question...how do I control the dsp on my hp laptop
Download the application on their website and follow the install instructions
@@Kpaceguy 🤦🏾♂️ duuuhhhhhhh
@@Kpaceguy thank you for the prompt reply...I have had a complete brain fart
How do you make the test noise
You have to play it yourself
Where can I download the app from on my laptop ?
Their website
@@Kpaceguy yea just did but it's saying after I installed it that failed to load function_createDeviceinfolist.
You need to summon a dictionary 🙃
Didn’t you get this free in the Camry? That time you called a Idmax a cheap sub lol 🤦🏽♂️
I got the 4ch amp from the camry. I bought the dsp myself