Quick Tips - Removing Terminals Part 1

Sdílet
Vložit
  • čas přidán 25. 07. 2024
  • Craig Darpino, support technician for American Autowire discusses the proper way of removing terminals from connectors. In this video he is using 56 series terminals.
  • Auta a dopravní prostředky

Komentáře • 19

  • @bigsparky8888
    @bigsparky8888 Před 4 lety +3

    OUTSTANDING...IM ON A 2.8 HEADLIGHT 9004 ON 91 NISSAN SENTRA...DINKY...BUT YOU SHOWED THE KEY...THE WINDOW...NOW I CAN GO FOWARD...TY SIR...(I believe if one does it every day...he/she gets good at it!!!) God Bless America...the LIGHT SWITCH HAS BEEN FOUND!!!

  • @pi4630
    @pi4630 Před 2 lety +1

    Thanks for this video! Those connector specialties are underestimated.

  • @graemed-g522
    @graemed-g522 Před 6 lety +3

    Best video I have seen on doing this so far, thank you.

  • @CarsandCats
    @CarsandCats Před rokem +1

    I was really struggling on some old MoPar headlight connectors (H4). What I found that finally worked is to jam the smallest flat tip screwdriver you have (like a jewelers) and move it up and down and you slide it in smashing the connector into itself. This is the ONLY way I could get mine out as the metal they used was extremely stiff. Then I used needle nose pliers to grab the metal part of the connector and wriggle it out. This did require a lot of force and was not easy! Newer connectors are much easier to remove.

  • @froglegs4910
    @froglegs4910 Před 6 lety +1

    very good tricks ! thanks lot !

  • @randysoong6129
    @randysoong6129 Před rokem

    Great info thanks!

  • @PENNYLS1
    @PENNYLS1 Před 4 lety +2

    Great video.. I’m in the process of changing my headlight switch and the connector were all burned. No I know how to Devin and replace. Thanks

  • @sjwalker5696
    @sjwalker5696 Před 9 měsíci

    Father-in-law keeps on saying do what. 😂

  • @oldelpaso4444
    @oldelpaso4444 Před 4 lety +1

    Thankyou so so much

  • @puffalump76
    @puffalump76 Před 4 lety +2

    So helpful thank you.

  • @bluestar.8938
    @bluestar.8938 Před 3 lety +1

    Thank you : )

  • @g-track5065
    @g-track5065 Před rokem

    Hello you only show one phase of terminals what about the other ones how you get them out?

  • @707SonomaComa
    @707SonomaComa Před 7 lety +1

    What is the proper crimper for those terminals?

    • @WiringHarness
      @WiringHarness  Před 3 lety

      www.americanautowire.com/shop/crimper-splice-clip

  • @matthewdon9565
    @matthewdon9565 Před 2 lety

    Helpful thank you, but RIP headphone users for that intro.

  • @matthewdrummer7091
    @matthewdrummer7091 Před 3 lety

    and nobody shows how to get the dill blox out of the holder. Be bold and try it

  • @greatguy4076
    @greatguy4076 Před 3 lety

    *sigh* The PROPER way to remove terminals is to use the tool that is MADE for removing the connectors. Either that, or fabricate a tool. I'm tired of videos showing the "correct" way to do something, and then..... a screwdriver. Come on people, screwdrivers are for driving screws. But you knew that, right? Because of the two words that combine to make the word screwdriver?? You probably also use a hammer and socket to install bearings, don't ya.

    • @WiringHarness
      @WiringHarness  Před 3 lety +3

      Sorry that you didn't find this video useful.

    • @gizzyguzzi
      @gizzyguzzi Před rokem

      Yes. Large sockets work well for driving bearing races.