I’ve looked at close to a hundred different “How To” videos on this subject. Your stuff has been the most effective, thorough, and simple to follow by far. Thanks for sharing-
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens czcams.com/users/postUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
Paul for my new TI2 9” units I’m still running my Old LSS transducer on my boat since I haven’t installed the 2in1 that came with the unit. Am I missing out on a lot by not having that 2in1 on there yet ? I have a shoot thru Hull for my 2d traditional. I’ve noticed trolling on Lake Erie that I don’t get the nice bright colored fish arches like I did with my HDS gen 2 unit. And thanks for all the help you give me it’s really appreciated.
Just a heads up, you’re using dual $250 GPS receivers with 5 meter accuracy, so having the rear point 1 just for having a closer gps for waypoints is irrelevant.
Great video!! Is there a chart speed for the down imaging. I just bought a hds live. It doesnt appear to be moving fast enough as I'm trolling on my post trolling motor
Great video as usual Paul! Have a question on the heading sensor while running. Do I have to run a point one up front or can I run it off of my front bow unit (hds3) while running a live at the console? I have a point one at the back near the transducer if I need to run the heading sensor off of that one but saw you didn't recommend that due to sliding around corners when running at high speeds. Thanks Paul!!!
@@PaulGettysFishing but while I'm on plane running at high speeds do I run heading sensor off of point one at the transom or off of the bow unit to keep from sliding in the turns while following trails as you talked about in your video? Sorry if that first question was clear as mud... lol
The only time I use chirp is if I am running an Airmar transducer, 200kz in 20ft of water is roughly 6ft beam, chirp is about 3 and works better for target separation but u miss alot of fish with it.
Thanks for the information. Only problem I am having is my depth does not show on down scan. Depth will only show on screen in traditional sonar screen. I am sure its a setting somewhere.
Are you using the C-Map withing the unit, or are you using a chip for Maps? The Navionics chip i have for the great lakes does not really give any better detail. As a matter of fact its worse then the C-Map in some areas on Lake Michigan.
C-map reveal is what I am using the chip, check and make sure you have reveal and not discover because discover you have to enable the hi definition blythometry on the unit to show 1ft contours
thanks for taking the time to do this. Just got a new boat with a 12 and a 9 and could not get the 9 to show temp. I'll try the tip on the setup local when I get back up Can you tell me if there is a way to change the font size on the sonar for the depth and temp. They are really hard to read - the colors of the sonar seem to be making it difficult to see....
@@PaulGettysFishing Thanks Paul, your insights are awesome. I'm converting to HDS Live and look forward to all it's capabilities! I love my new Ranger 520C and look forward to catching countless fish with this awesome combination of tools.
They need to start a new circuit call the throwback series , This series would consist of your bass rig with almost no electronics only a old school type screen no GPS etc.. let see how good you good ol boys really are, I know when i was fishing tourneys pre electronics and we were pulling 20lbs 5 fish bags there was no stopping who ever got on em. but these days with all these electronics... idk, the skill of reading the lake/water has been removed from the game. I mean we all have a general idea what the fish should be doing depending on time of the year but lets see who's really good at fishing opposed to who really good at reading electronics a lot of winner will turn into losers real fast!!. Just my humble opinion.. Peace out!
At the 3:30 mark in this video: I have HDS Live 12. Do I choose the PDRT transducer also or does the 12 have a different in hull transducer than the 16?
Do you know how to turn on contours on the charts? Low range has a video where they just push a button. It won’t highlight the button nor let me push it. Are they making me purchase something? Thanks for your help!!! Can’t find anything in the manual or their website or the Internet.
depends what unit youhave and what lakes you are on some lakes have free contours, and then some of the smaller lakes u would need to purchase a navionics card and that is a mapping card for your region
PaulGettysFishing I purchased a navionics west card not realizing it was a different size. Do they make an adapter or do I have to purchase a different card. Thanks for your quick response!! Subscribed.
PaulGettysFishing thank you! Thank you! Thank you!!! There is a little card inside the big card. Today was a shit day of fishing. Tomorrow will be a much better day!!!
I’ve looked at close to a hundred different “How To” videos on this subject. Your stuff has been the most effective, thorough, and simple to follow by far. Thanks for sharing-
Thank u
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens czcams.com/users/postUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
Great video!!! Set up on Live and in hull today. Worked perfectly. Thank you.
Absolutely awesome......thanks Paul, you are a champion!
man definitely the best guy for lowrance info. Thanks for the info :)
Great Video Paul. One of your best IMO.
Awesome! Always knocking it out of the park
Excellent idea thank you I just got this unit HDS 12
Thanks Paul from Australia, your Lowrance vids are the best.
great info! Just got my first Lowrance, a HDS7 Live for my kayak, and trying to learn all I can. This video helps a lot Thanks!
Planning on getting the exact same model for my hobie compass myself
Hey I liked this Video It helped me get my new unit set up, Much appreciated and It is worth watching two or three times. Thanks!
thank you
Your videos are always good. Thanks.
Very good info on the point 1!
Great Video!! Helped so much!!
Thank you for the info - It helped me with my new system,
I do not have a transducer cable for my front fish finder, I am using the US2 adaptor from my Ultrex. What do I select for "Transducer type"?
Paul for my new TI2 9” units I’m still running my Old LSS transducer on my boat since I haven’t installed the 2in1 that came with the unit. Am I missing out on a lot by not having that 2in1 on there yet ? I have a shoot thru Hull for my 2d traditional. I’ve noticed trolling on Lake Erie that I don’t get the nice bright colored fish arches like I did with my HDS gen 2 unit. And thanks for all the help you give me it’s really appreciated.
the 2n1 is definitely a better transducer for structure
Your a star...make it easy for us numptys. Thanks
👍🏻 Awesome info
Just a heads up, you’re using dual $250 GPS receivers with 5 meter accuracy, so having the rear point 1 just for having a closer gps for waypoints is irrelevant.
Great video!! Is there a chart speed for the down imaging. I just bought a hds live. It doesnt appear to be moving fast enough as I'm trolling on my post trolling motor
There is no adjustment for scroll speed on side and down scan. I was very disappointed to learn this. I was told it works best at 3 to 5mph.
Great video as usual Paul!
Have a question on the heading sensor while running. Do I have to run a point one up front or can I run it off of my front bow unit (hds3) while running a live at the console? I have a point one at the back near the transducer if I need to run the heading sensor off of that one but saw you didn't recommend that due to sliding around corners when running at high speeds.
Thanks Paul!!!
the heading u will run it off the point 1, but the gps on the front will use the internal gps and the rear unit will use the point 1 for the gps
@@PaulGettysFishing but while I'm on plane running at high speeds do I run heading sensor off of point one at the transom or off of the bow unit to keep from sliding in the turns while following trails as you talked about in your video? Sorry if that first question was clear as mud... lol
@@DavidWhite-lc1fc u run it off the point 1, or under heading on your console u can just uncheck the point 1 under heading
Paul why do you prefer 200 kHz vs chirp on your 2D sonar setting? Great video really helped me setting up my new carbon
The only time I use chirp is if I am running an Airmar transducer, 200kz in 20ft of water is roughly 6ft beam, chirp is about 3 and works better for target separation but u miss alot of fish with it.
Do you use the same process for the HDS 9 Live or is there different settings you need to use?
same
Big Help!!!
Thanks for the information. Only problem I am having is my depth does not show on down scan. Depth will only show on screen in traditional sonar screen. I am sure its a setting somewhere.
Just make sure u are pulling from the correct source
@@PaulGettysFishing ok. Thank you. Great information.
Are you using the C-Map withing the unit, or are you using a chip for Maps? The Navionics chip i have for the great lakes does not really give any better detail. As a matter of fact its worse then the C-Map in some areas on Lake Michigan.
C-map reveal is what I am using the chip, check and make sure you have reveal and not discover because discover you have to enable the hi definition blythometry on the unit to show 1ft contours
Paul can i install a point one ant on my new 9TI 2 unit ? and do youhave a Video for that ?
yes you need a nmea 2000 starter kit
thanks for taking the time to do this. Just got a new boat with a 12 and a 9 and could not get the 9 to show temp. I'll try the tip on the setup local when I get back up
Can you tell me if there is a way to change the font size on the sonar for the depth and temp. They are really hard to read - the colors of the sonar seem to be making it difficult to see....
Press power once, edit overlay. Hightlight what u want to enlarge and press + to enlarge and - to shrink
@@PaulGettysFishing Thanks Paul, your insights are awesome. I'm converting to HDS Live and look forward to all it's capabilities! I love my new Ranger 520C and look forward to catching countless fish with this awesome combination of tools.
They need to start a new circuit call the throwback series , This series would consist of your bass rig with
almost no electronics only a old school type screen no GPS etc.. let see how good you good ol boys really are, I know when i was fishing tourneys pre electronics and we were pulling 20lbs 5 fish bags there was no stopping who ever got on em. but these days with all these electronics... idk, the skill of reading the lake/water has been removed from the game. I mean we all have a general idea what the fish should be doing depending on time of the year but lets see who's really good at fishing opposed to who really good at reading electronics a lot of winner will turn into losers real fast!!. Just my humble opinion.. Peace out!
At the 3:30 mark in this video: I have HDS Live 12. Do I choose the PDRT transducer also or does the 12 have a different in hull transducer than the 16?
Depends what boat u have
@@PaulGettysFishing 2021 Nitro Z21
Hi I changed my temperature form global to local and it don’t show me temperature in sonar source only depth . How I can put it back ?
Connect a transducer with a temp probe
Great video, thanks for sharing!
Could you please place the link of that video you are mentioning here on this time: 9:33 ?
Thanks in advance!
czcams.com/video/C7VWdHb0X7A/video.html
@@PaulGettysFishing Thanks Paul, awesome!
Do you know how to turn on contours on the charts? Low range has a video where they just push a button. It won’t highlight the button nor let me push it. Are they making me purchase something? Thanks for your help!!! Can’t find anything in the manual or their website or the Internet.
depends what unit youhave and what lakes you are on some lakes have free contours, and then some of the smaller lakes u would need to purchase a navionics card and that is a mapping card for your region
PaulGettysFishing I purchased a navionics west card not realizing it was a different size. Do they make an adapter or do I have to purchase a different card. Thanks for your quick response!! Subscribed.
@@tyson1015 if it is a new card they have a micro card in the end of the full size card, is the card new?
PaulGettysFishing thank you! Thank you! Thank you!!! There is a little card inside the big card. Today was a shit day of fishing. Tomorrow will be a much better day!!!
@@tyson1015 good deal!
How do you add boat docks to your mapping
Navionics has them on their cards, cmap reveal you have to turn the photo overlay on and adjust the transparency to see then
My 3 in 1 transducer didn't auto detect and my transducer list doesn't show it to select. Any idea?
which unit?
HDS Live 12
I'll add the downscan and side scan work but would they work better with the proper transducer selected?
@@djcarpenter77 do the latest update and then perform a hard reset, make sure u save waypoints before
@@PaulGettysFishing Tried that a few days ago and still didn't work. I'm just curious if it's worth worrying about? Thanks for the reply!
Great video, are you local in Florida?
No sir I am in SC
I left a voice mail for you , would like to talk about getting my hds 12 lives dialed in . Thanks for the reply
@@captainstevespatafora4185 call ya tomorrow been slammed