How to run DStv installation wizard, your DStv specialist South Africa
Vložit
- čas přidán 22. 08. 2024
- You need to run this on your new decoder or if you have lost of signal and always check your LNB cable at the back of your decoder. dstv installation wizard for the best signal quality.
Make sure to Subscribe to my CZcams channel and click the notification bell so you are notified every time god bless.
multichoice south africa , how to install dstv in Johannesburg, the best signal of your DStv,have a good dstv cable in Johannesburg,dstv aircon media is your DStv specialist in Johannesburg, your can repair your DStv by yourself, for your DStv signal go to DStv and aircon media, is preferable to contact a accredited installer for your DStv repairs, a solution for a E48-32error no signal on your installation, you can have at Brixton Johannesburg your accredited installer, great to upgrade to DStv explora, we are your DStv local installer in Johannesburg, for all your DStv problems contact DStv and aircon media, the loss of DStv signal could be fix by yourself, we go the best of smart LNB for your installation, the damage of the LNB could be the your problem, do your extra view and extra point by yourself, DStv alignment can be useful for your installation, a new DStv decoder ultra will make a big difference on your installation . subscribe and share this video ,thanks for watching.
WhatsApp 0839477233 in Johannesburg
www.mrappliances.co.za/mrappliancesrepairs@gmail.com
• How to solve dstv E48-...
/ dstvandairconmediaalpha
don't forget to subscribe and like my video thanks god bless
This was so helpful it saved me money for the technician
Thank you some much 🙏🙏I called the call center that lady waisted my whole 30min and my etym..Thank you so much sir..my problem was resolved in 1min within your help.
thanks for watching
Thank you very much, I was so confused about this problem. Now I'm happy because problem solving and I saved my money too
This worked for me.
Thank you very much😊
I believe this video has helped you to fix your dstv problem. support the channel with a like , subscribe ,share and comment below. Thanks and god bless.
My screen is stuck on step 4of5
This was helpful,was about to buy a new decoder🤞thank you so much 🙏
Mine does want to scan it says “this function cannot be performed as the signal strength is poor
Same here 😢
@@khayananadid you end up finding a solution i am stuck too
Thank you sir. Have been running around not knowing what to do
It worked thank you so much brother 🙏
Thank you.....I'm from Ethiopia
Wow thank you so much you just saved me R300 these people eat our money for good nothing
Thanks I was so stressed 🙏🙏🙏
You are the best,thank you so much❤❤❤you have just saved me alot of money,God bless you
Do you know you can earn over R63000 weekly working from home and be your own boss just ask me how via WhatsApp for more information +2774 972 0043.
Thank mr this was helpful been stressing 🙏💯
Yey, ngyabonga bhuti. Zinhle izaluleko zakho.
Thanks,I got it right, that's so helpful 🙏
if you have a smart lnb with 2 ports do you select unicable or universal? on explora?
I wandered why mine did not have universal ,but I now know it is because it is an explora. I struggled a lot but the I got it
I wish you typed how you got it cause I’m also experiencing the same thing
Thank you very much ❤️❤️❤️❤️❤️👌
This was helpful..thank you
Thank u so helpful
Thanks a lot afonso
thanks man,this was really helpful
Thanks you ❤ so much help
Thanks man you help us
Thanks for watching
Thank you so much
If you happen to see the black box please refer to other videos in this channel that show you how to fix signal problems
thank you
Thank you!
What's different of multichoice and other decoders of DStv
Does IS20 work for the DStv?
How do i remove from this process without scanning
Hello boss im having a problem here i bought a dstv decoder, when doing the steps of installation wizard, the decoder scan from 0 number of tv serves to 35 then back to zero again.what could be the problem?
I need help
Hlw sir can u plz help mine doesn't rich 5 of 5 step its ends at 4 nd says this step cnt b continue the strength is poor
Just there on step 4 of 5, I have selected universal as an LNB type and when I try to scan it just shows a black bar .what can I do coz from there it doesn't move it hist stays there. And the is a time I reached step 5 of 5 but all those numbers remained as 0.and it says your signal strength and quality is poor.
Same problem as mine, please assist
Same problem as mine🤦♀️
Mine too
How did yall solve it😢
I need ur help , my decoder is ending on step 4 , what's a problem
What if when you press 5of 5 it says the signal strength is weak
Lyk mine
Mine to
Mine says the signal is poor i must increase the percentage what do I do because it's not scanning at all
Help
Mine says the signal is poor 😭 it doesn't want to scan, what should I do?
Im having same problem
@@fezilentombela6392 was your problem sorted? Mine too
What if you are not in one of the countries outlined
My dstv it's been like this for two days now guy please assist me on what do now please guys
When i get to step 4, LNB Type: Universal
Tuner Signal Status: no signal (signal strength is 0)..please assist
I'm having the same problem, please help if you got it fixed
I'm also having the same problem
Mine is stuck on step 1, not moving.😢
My installation is stuck on step 4 and I press LNB Universal and scan it shows signal quality is poor 😢😢
Same
how do you enter/access the installation wizard??
My wizard is set on Portuguese how to return it to English
This is not working for me😢😢
Mine says signal is poor
Hi but if. It still show poor signal than what must I do
Hi still shows there is no signal after I try this what must I do
Still there no signal on step 4 of 5😢
How did you solve it