Ford Hydraulic Pump Installation, High-Compression Fitting, How to Install without Leaks
Vložit
- čas přidán 25. 07. 2024
- Rachel and Dan show a detailed installation of the high-compression fitting on Ford 2000, 3000 and 4000 3-cylinder tractor hydraulic pump.
Parts are available at this link: farmtractorrepair.com/product...
Follow Rachel on Facebook: www.Facebook.com/tractorrachel
Follow J&D Productions on Instagram: janddproductionsinc
The producers of this free tutorial do not assume any responsibility for accidental injury, death or dismemberment resulting from the performance of any orations detailed in this tutorial. Please be aware of common safety steps--expressed, implied or not expressed. - Jak na to + styl
I was telling my wife yesterday that I had not seen a Rachel video in a while. Then, this dropped. The Lord do work in mysterious ways.
Perfect video. Organized, clear and zero bloviating. Thank you.
Thank you from all Ford 3000 owners, thanks for taking the time to make this video. Perfect timing
Thank you so much for this video. New to tractors and my Ford 3000 I bought two months ago and now I'm plenty busy getting it into shape for this summer of use. I've used your videos more than any others out there to help me understand the steps for much of what I've been working on. I do have a part supplier (New Holland) where I can get most of my parts locally just 10 minutes from my house. HOWEVER, they are not the ones helping me figure out what steps I need to do for many of my repairs/maintenance and I am learning all that from YOUR videos. So now I need to work on and reinstall my hydraulic pump so it would seem only fair to me to show my appreciation for the service you provide and I've just now ordered the "Hydraulic Pump Mounting Set with High-Compression Fitting" from your website. Thank you again for your very helpful and detailed videos.
Father/daughter project, love to see you two working together..... Good job.... God Bless
Y’all are amazing!!! Thank you so much for the videos and the exceptional customer service on orders.
Hello Rachel: We have been waiting for a new video to make this special workshop, and the hydraulic pump is important at work. Thank you
Great video. My 3000 is a 65 and luckily both LP and HP pipes are flanged and o-ringed so a little bit easier to install. The torque wrench does fit in there. My problem was the oiling hole for gear side kept causing the gasket to leak. After two tries got it straight, but the drive side for my tractor had to be RTV'd, go on straight, be bolted, and not be shifted any...otherwise it would leak.
Keep'em coming, these videos have helped me a ton!
I ordered your HP pump seal kit today. My 3000 tractor makes this a very hard job. The front-end loader apparatus is directly in the way, plus the exhaust is routed down and out the back of the tractor. Those two things make it even more difficult to do this work. Your videos are extreamly helpful. Thanks for being there😊
Thnaks for your illustration, High pressure compression fitting , just repaired mine on my Ford 3000 tractor. Thanks so much
Great video. Looking forward to getting my parts I ordered from your site. For my ford 8n tractor. Your videos are very informative and helpful. 🚜🚜🚜🚜
Always enjoy the Gingells' videos. They are both natural teachers and whether you actually own one of the models they are working on or not, there is always something to learn that will apply to mechanical work.
Dear Dan: I do not have a tractor. Even so, during the last months i have been watching every single video on the channel.
Let me say, you should be deeply proud of your daughter, she is very good.
Great job always learn something. Thanks 😀!!
THANK you for sharing!!
Actually it's kinda simple. Take care and have a blessed week and I'll see you on your next video.
Great video!
Do you have anything on the power steering cylinder rebuild for a 4000 ford?
Thanks Rachael
You & your pa ! Exlent !
Thanks For Ur Video Was Very Helpful
I wish I had a treasure like that looking good your friend from Nebraska
Love these videos, but Im pretty partial to the ford 3000 since I have one!
I have a Ford 3000 gas and was wondering if you have a video on repair the power steering system
Great job want to ask your opinion my injector pump on 150 Massey Ferguson is leaking fuel needs to be resealed would it be better to buy a new pump it,s about the same price either way you go.
Now I know why the kit I bought did not work, the missing piece!!! Seriously, big thanks!!
I am getting a farmall m which has a 6 volt system and I'm wondering whether I should go with a tank heater or a block heater for winter starting. Plus how hard would it be to install muself?
Good video I have a Ford 3600 tractor are the hydraulics good enough to run a 25 ton log splitter thanks Danny
I have a quick question, on a farmall h or m, can you hook up to hydraulic hoses to each plug on the left side of the tractor, to create a 2 way system. or would you still have to do the standard conversion with a separate valve?
Any tips on what to do if the high pressure fitting keeps loosening?
I have bought the kit and put everything on like the video said too and the metal line to the compression nut stills keep popping out
Hi I have a question I have a ford 3000 like the one in the video what is the metal bracket above the centre of the hydraulic pump for your one has it to?
All I can only find aftermarket kits. Do you have a parts number with the steel ring?
If my.3 point on a ford 3600 won't lift, is that pretty much the pump. I replaced filter hoping that would help and nothing. It will randomly come on while mowing but I can't lift for most times. Should I replace the pump?
Found it thank you..
Do you know the size of the bolts the two small and two large used to hold the hydraulic pump to the tractor thanks
My high pressure line is all scratched and grooved. Can I polish it or will it need replaced
Good information Rahel mem OK thanks 👌👌👍🇮🇳🚜🚜😃😃
I have one that is leaking, how can I purchase the correct compression fitting?
Can I remove and install high compression fitting with kit without removing the pump
I’m trying to find the correct fittings for the hydraulic line. I just bought a new hydraulic line and need to find the crush fittings. I have the ones with both copper sides but my old line kept blowing out. Do you have part # for the correct one?
I have a Ford 2000, I would like to run the loader off the tractor hydraulics, is this possible and how to do it
Hi team MY Ford 4000 is leaking engine all from around the 1/4 theaded shaft thatn you pulled in your overhaul of the pump >> I can see it coming from around the shaft? Can i pull this shaft from pump like you with a weighted puller,enough to seal ,wihout pulling pump out for complete service ,? Bob Nsw Aus
Rachel
I HAVE 1969 FORD 2000 TRACTOR. MY GASKET AT THE OIL FILTER LEAKS OR FAILS SOMETIMES. ALL OIL IS LOST IN 5 SECONDS OR LESS. HOW CAN I REAPIR THIS PROBLEM. THANKS FOR ANY HELP.
I can see why they changed the later years to just a bolt on flange that looks like a pain, mine is making too much pressure, had a new pressure relief valve and didn't help, could I have gotten a bad one or are they adjustable at all, my put another call into Dan he was very helpful last time I talked to him
How about a how to on a hydraulic front mounted pump!!! Any chance?? part numbers etc??
I have two good Core Pumps for 800 and 3400
Ford 861 powermaters oil change please and fluid checks
What is the part number to get the correct fitting
Who makes the kit? I need one asap
I need to buy the set from u what do I need to do
Greasy nails and fingers...I'm so in love 💕💕💕💕
But when my vein covered, dead-cold skeletal hands are covered in grease it's not as attractive!.
@@coffeepot3123 Then again you're not Rachel.
Question if you please: I have a Ford 4000 Industrial 4-cylinder diesel. Do the 3-cylinder and 4-cylinder use this same hydraulic pump???
They do not use the same pump. There are some similarities between the hydraulic pumps but yours would not have this style of compression fitting. This video outlines the rebuild of the pump you have: czcams.com/video/ILaIk0D1_z4/video.html
@@DanGingell Thank you... ^~^
I wish I own a tractor.
Hope you are well. You have tears in your voice.
Hello, I'm a 64-year-old farmer who recently purchased a small farm in Goodrich, Mi, off Dutch Road.
My wife and I stopped at the Steiner Tractor store for a look around and to purchase a front tractor emblem for my old 8n!
Inside the store, I took 1 photo of my wife sitting in a chair and the counter clerk scolded me saying, no taking of pictures in the store.
The counter clerk demeaned me in front of another customer, and my wife! I don't plan to return to Steiners or make further purchases from them!
Steiner Tractor should post signs that read: (PLEASE, NO CAMERAS ALLOWED!) to prevent degrading community customers.
(Occurred on Monday, July 17, 2023)
🚜😊❤🔨🔧 olivier de france 😊😃☀👍👍🔨🔧
You have the lock washer in the wrong direction .
Sorry my mistake you have your lock washer in the right direction!
hey i know you work on lots farmall, 8n and the like... what about all this china, SK, japan, india... and the list goes on... should someone start hacking and repairing this stuff? thanks...:)
I love you will you marry me???