How to remove fiat 500 door panel and outer door handle

Hello and welcome,
In today's video, we will show you how to remove the Fiat 500 door panel and the Fiat 500 door handle.
You will need to remove the door panel first, start by removing the little covers next to the door pull handle and the cover on top of the inner door open handle. In total, 3 Allen key-type screws need to be removed. Next with a plastic tool get in between the panel and the door assembly, pull out the bottom of the panel first, and then slide it upwards to detach it from the window seal.
If you remove the driver panel, you must unplug the mirror switch and detach the door lock cable from the inner door handle.
To remove the door handle you will need to remove the 10mm nut(this is the same for both sides)
Removing the driver's outer door handle and passenger door handle is the same idea, however, the driver's handle has two metal rods connecting to the door lock, which also has locking clips. The passenger has one rod and from what I know, no locking clips
DETACH THE METAL RODS FROM THE DOOR HANDLE SIDE, if detached from the lock side, the metal rods get stuck and stop you from removing the handle from the outside.
I hope you have found this video helpful,
Please don't forget to like, comment, and subscribe
Applicable models Fiat 500
Keep in mind Australia is left-hand drive with the steering on the right
Disclaimer
Before following any car tutorial, please ensure you have the knowledge, skills, and tools to perform the task safely and correctly. Always follow the manufacturer's instructions and guidelines, and if you are unsure about any aspect of the tutorial, seek the advice of a qualified mechanic or automotive technician. Any actions taken based on the information provided in the tutorial are at your own risk, and neither the author nor any affiliated parties can be held responsible for any damage or injury that may occur.