Volkswagen Door Lock Fix
Vložit
- čas přidán 19. 01. 2024
- Removing, repairing and refitting a broken door lock cylinder on a Volkswagen Polo Mk4 9N. If the key doesn't turn at all or it just keeps rotating without opening the door lock, then one or more of the internal parts of your lock cylinder are probably damaged or broken. This repair process is similar in many other VW, Audi, Skoda and Seat cars from certain years. Check with your car’s manufacturer to be sure. The cam inside the barrel is the part that usually breaks. I carried out the repair with the cylinder in my hands but it would probably be easier clamped in a vice, if you have access to one. You can buy a repair kit online for a few euros/dollars. I would advise keeping your locks lubricated to prevent them from breaking in the first place. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Lock Repair Kit ~ amzn.to/4afw1w1
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2024
Read important information below:
Disclaimer:
My videos are a guide to making repairs and also to provide helpful information.
Do not attempt to make any repairs unless you’re sure you know what you’re doing. For more detailed information, if something is not clear to you, or you don't understand something, have the repair carried out by a qualified mechanic or at your local car dealer. Any repair you carry out on your car you do at your own risk.
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts. - Auta a dopravní prostředky
0:26 today I fixed my polo car lock using your instructions amazing man thank you very much
You're welcome !
9 Umdreungen Lupo, Golf IV 12 Umdrehungen bei gezogenem Handgriff. Ohne Worte alles perfekt erklärt! Klasse.
Thank you !
The spring set is the hard part. I think 4 hands might be needed.
Excellent demo !
Thanks Mark ! :)
Very detailed and helpful. Thank you. 2000 VW New Beetle
Thanks for watching!
Thank you sir, i love your detailed explanation
You're welcome !
Sve rečeno bez ijedne reči.Svaka čast,majstore 👍🍺
Thank you !
Köszönjük! Nagyon jó, érthető videó!!!
Thank you !
Very detailed video THANKS BRO!
You're welcome, thanks for watching!
I fixed my car lock, thank you very much 🎉🎉
You're very welcome, thanks for watching !
Excellent
Thanks for watching !
Thanks a lot bro your video helped me a lot
Excelente, el mejor tutorial.
Thank you !
Thank you!
You're welcome!
Thanks so much❤
You're welcome 😊
خیلی عالی بود ..
آفرین به شما..❤❤❤
Thank you !
Gracias me costo lo del resorte pero se puede
Como se hace en el video con un destornillador
Excelente video gracias
Wish i watched this video first.. i lost the locking ring 😂
Мне нравятся ваши видео!Без слов,но всё понятно.
Thank you !
Danke schön
You're welcome !
Se ve tan fácil cuando tú lo haces 😢
El muelle es insufrible (una hora llevo intentando colocarlo, pero no tengo fuerzas... Probando a tu manera lo logré ❤
Muchas gracias 🤗
You are very welcome, thank you for watching my video !
Good edu video thanks
Hello there again. Would you be so kind and send me a link for replacement of these parts
www.amazon.co.uk/dp/B09VSRYQDR/
Double check to make sure they fit your car
@@screwsnutsandbolts I'd repaired it during Easter bank holiday's weekend with the right parts (well I shoudl grid a bit here and there but I make it done)
I can actully see if I would order it on Amazon I would be even cheaper than here in CZ. Anyway so far best video tutorial for such situation. Thanks and bye
That is super, thank you. Could I ask, what if the door is closed and I can't open it just now, because the lock is broken? How to open it the first place? :) Thank you
Thanks. It depends on which part of the lock is broken. There are plenty of videos on youtube showing different methods of opening car doors which won't open from the inside or outside. I haven't had to do it myself so I can't really advise you on that.
Hello, first of all thank you for the videos you make. Do you know if this works also for polo 5 6r1 ? Do you know if can get the parts from somewhere or if you have a related part number please ? Keep up the good work, you are saving thousands !
You're welcome. What year is your Polo ?
Did you replace anything or just take it apart and put it back together? I have a problem when i unlock it it works fine but if i try to lock it it keeps rotating indefinetly. Should i order repair kit before trying anything or could the fix be just to reasemble it?
I just took it apart and put it back together to demonstrate the process. If it keeps spinning in one direction it sounds like some internal part has worn or broken so it's it's up to yourself if you want to order a kit before disassembling the lock to check.
Muí.bueno.el.video.meayuda.para.mi.iviza.del.97👍🏻👍🏻👏👏👏👏🚘🚘🚘🚘
You're very welcome, thank you for watching !
bonjour moi jai ma commande qui ne marche plus ,donc je suis obliger de condaner avec la cle manuellement ;esceque si jais une cle d'une autre voiture de meme marque je reprogramer la commande . ma voiture est mercedes ml 270 de 2005
Do you know where i ca buy the Kit for 2 dors polo 2004 mk4?
You can find replacement kits on Ebay or Amazon
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Thank you !
But what did you change the cam the spring or tailpiece? (Or all)
I was just demonstrating the disassembly/reassembly process but it's usually the cam that breaks.
Hello bro, is the repair kit the dame for VW Gol 2011?
Thank you!
I don't think so. The cylinder is quite different on that model
Que año este auto
@@lgcarkeyNJ This is a 2004 VW Polo
What do I do if I completely messed it up n lost the ring but n the torx screw is wonky in the door now?
Any updates/tips? I’ve just lost the ring too😅
You need to take the door apart from the inside and recover the ring. This video will show you what you need to do: czcams.com/video/juU8IhH0KKs/video.html
@@Japanesezenwindows You need to take the door apart from the inside and recover the ring. This video will show you what you need to do: czcams.com/video/juU8IhH0KKs/video.html
@@screwsnutsandboltsthanks for the quick reply and helpful video! I lost the ring when trying to put the cilinder back in😅. Taking the door apart is way above my skill-level so will get help from a garage. It was worth the try though.
What happens if you don't keep the handle open while you're undoing the Tork screw?
The locking ring could pop off and fall inside the door frame, which can be a lot of work to retrieve and refit
@@screwsnutsandbolts all done and working fine. Thanks for taking the time to help people.
@@jezpday You're welcome !
Man, on new generation they put an whole steel piece around that can't be open and repair 😢
But this shit still breaking.
Anyway thx for your video
You're welcome !
Thanks !