My 2021 CBR600RR walk around / modifications followup
Vložit
- čas přidán 12. 09. 2024
- Just a quick follow-up to my previous video with the bike fully assembled and clean!
First Part: • My 2021 CBR600RR USA m...
Partial Parts List:
Corbin Seat: www.corbin.com...
TST Industries / Body Protection Level 2 Kit: tstindustries....
TST Industries / LED Kit (Tail eliminator/Rear LED/Front Turn Signals): tstindustries....
Oxford Heated Grips: www.amazon.com...
TriPage (Gauge Swap / 1000RR Modded Mirrors / Rear sets (Powder Coating & LED mods): tripageled.com...
Motodynamic LED Headlights: www.motodynami...
MotoComposites: All the custom carbon fiber parts: www.motocompos...
Beautiful bike man, ive been trying to get ideas of what to do to my 2023. finally glad to see someone with some similar ideas
How has the ideas come along I’m struggling as well 😭
Best CBR I have seen in a long time !!! Beautiful !!! inspiration to get my own, had a 2015 Mto7 but had to get rid of it, been dying to get back to riding. great vid !
Thanks! Don't be afraid to get back in, I had a 10 year break between mine.
Got damn bro. Want my 2022 to look like this!
It's a process but I love how it turned out. I tried to make everything install clean and look like it was meant to be there.
That gauge cluster! It's perfect man. Super tasteful.
The only other thing I’d do is
1. Change the mirrors to aftermarket mirrors with a built in GPS in 1 and a blind spot camera in the other. The camera sits in/on the tail light
2. Hardwire a radar detector into the bike and put it low on the bike or fairings so it is almost not visible
Immaculate brotha fantastic work
Love the bike - great mods as well. Cheers.
Sweet ride bro
Sweeeeeeeet thing is clean man good job
Oh my she’s is a beauty! How comfy is the seat bro?
Great build
Man!!!
Nice bike. I need that gauge cluster!👌 What brake lines did you go with?
Nice, job! Especially like the foot peg turn signals look great while adding safety.
My question is are their any issues with adding aftermarket exhaust tripping a check engine or anything to know before changing exhaust?
Thanks, beautiful bike!
So I've only replaced the muffler part, and it doesn't cause any issues. Replacing the mid pipe removes the valve controlling the back pressure. You'll have to either leave the solenoid connected or add an aftermarket plug that tricks the ECU into thinking it's controlling it.
I wish Honda would take some tips from you, this bike went from great to perfect. Feel free to donate it to the 6th person to comment on the video. #6th for 600
Awesome bike man. I just put an akrapovic on my 2022 and bro… looks so fucking sick and sounds great especially after you take the baffle out. That fat, carbon fiber fits the undertail perfectly. But i definitely am going to get more mods like you have
Hi ! Do you have a link for the levers ? ,. Bike looks amazing by the way . thank you for sharing.
Where did you get the license plate holder and led light on it?
Nicely done. I love it. Do you have the link for the Side mirrors. And you think this will fit my ‘24 CBR600 RR too?
That is a nice bike, very nice work
The 1000 mirrors is a nice touch, can’t even imagine dealing with that headache, but it looks great in the end. Do you have an Instagram page for your bike?
I don't; not a bad idea for more exposure though
@@cbr600rr21 let me know when you get one! I have the same bike I post on there
link for the tail bag?
www.amazon.com/dp/B08G7ZKPDW?ref=ppx_pop_mob_ap_share
Did the cluster come with the gear indicator, or was that added
That was done by TriPageLED
Was the dash plug n play once you got it back? Or did you have to calibrate it?
Also what’s your exact tripage dash options? I’m trying to get my dash exactly like yours
So; you'll have to route the plug from the dash area to the diag port under the front seat. You'll then have to setup the gear indicator, which involves you either riding and shifting through the gears or putting the bike on stands and running through the gears for it to learn.
I chose white LEDs; white indicator and reversed the polarity on the cluster.
why did you choose the 600 over a 1000? im on a 650 but i think im going to upgrade and get a 1000
Inventory; cost ($6k more) and I'd been off bikes for 10 years, I knew I was comfortable with this and I only regret it when I ride with liter bikes 😂
Hi do you have any links to the things that you added to your 2021 CBR 600? bought one last year thanks 👍
I've added links to the major items in the description
Is there a way to make the dash lit like in the night time in day light as well?
I'm not sure what you're asking.
did you drill a new hole to install the cbr 1000rr side mirrors? last time i checked its not compatible
Yes; I had to drill a hole to pass the wires thru. These are aftermarket ones that Tripage LED already made bolt holes that align with the factory holes.
Gorgeous, you should sell brand new modified bikes like these. I would easily pay $15,000 for this.
I don't know if my sanity could take it 😂 but in all reality, granted I'm paying retail, there's over $5k in aftermarket mods.
Haha funny that’s way more than15,000 not counting the actual labor
@@Losangelesmotorcyclesluckily I did everything myself, minus the ECU flash and Gauge/peg mods. But yeah, you'd be at $17k just for bike and parts.
@@cbr600rr21what kind of mirriors with the lights on the back are those? An do they make them for other bikes? An the led rear foot pegs
Sorry for the delay, didn't get notified you commented. The mirrors are aftermarket 1000 mirrors, Tripage LED sells them, and they also did the rear peg LEDs.
how long did it take for your gauge to come back?
I want to say it was about 3 weeks from door to door; however during that time something happened in Florida I think there was a hurricane that delayed things.
Hi, nice bike!! I see you black painted the heat shield under the tail, right side, behind the passenger peg; was it difficult to unmount the heat shield? I'd like to do the same on my bike. - Thanks!
It's not too bad, have to loosen the rear brake master cylinder and kind of push everything out of the way. It'll be tight on the bottom.
awesome video! really interested in the rear pegs but on the website says 2007-2019 i just got a 2023 cbr and was wondering if they would fit? since yours is a 2021
You actually send your pegs in and they modify them I just don't think they regularly update the years. Email to confirm but I don't see why it would be an issue.
@@cbr600rr21 oh i see. thank you
Great bike, I have a 2023 and I like the MoTo dynamic headlights and the TST taillights would they fit by chance, it’s hard to find videos on the 2023
If you're in the US; they are the same model
Hey, do you mind telling where you got the tail bag from the thumbnail?
Motorcycle Tail Bag Backpack... www.amazon.com/dp/B08G7ZKPDW?ref=ppx_pop_mob_ap_share
How easy was the cluster to install?
So you have to remove the front end and the bracket holding it on to completely remove it from the bike. I sent it out then reversed the removal to get it back together. So if you're comfortable removing the fairings, nose cone etc it's not bad. Just label all the bolts and screws you remove.
@@cbr600rr21 hell yea definitely need to get an updated one lol
nice bike
beautiful bike i have an 08 wondering where i can get that undertail plate mount i need one baddd??
tstindustries.com/tst-fender-eliminator-honda-03-16-cbr600rr-04-07-cbr1000rr.html
what color is your Lcd Display ? is it blue ?
It's white; like a pure white "daylight" color. Swapped from the orange/red.
The blue hue is from the polarity swap; so what was black is now white; the black from the LCD looks blue.
Wow, is a beatiful bike
Thank you!
If you don’t mine me asking, what was your setup on the tripage gear cluster? It gives 3 options led color change, gear indicator mod, and blacked out. I’d like the same setup just wondering what your drop-down choices were so that I can get the same resemblance. Thanks!! Killer bike brotha
I went LED color change: White; Gear Indicator White; Blacked Out: Yes (reversed polarity)
@@cbr600rr21 awesome bro, thank you!
Why did you flash ecu for a slip on? Thought you had to do that if you installed headers
It was really to smooth out the throttle decelerating. It can benefit from the slip on and K&N filter.
Ok I was just curious. I ordered a full toce system but then cancelled the headers and am just getting the slip on for now. I have a 23’ cbr600rr, I think I’m gonna buy a k and n filter when I make the first oil change. Only have 360ish miles on the bike currently
@@blainebrown2899
Definitely have toce flash your ecu. It does more than you would think for such a small investment.
Great job, Man. What a beautiful bike.
Would you send me the link for those gas tank pads, please ?
Sorry for the delay..
REVSOSTAR Motorcycle Tank Side... www.amazon.com/dp/B07YKJZTHT?ref=ppx_pop_mob_ap_share
How hard was it to do the slip on and do you need to tune it for just slip on? Second where you get the frame sliders and was that hard to install
The slip on requires removing the tailsection to get to the bolts; and removing the heat shield, The frame sliders i cut the fairings with the included templates, if you take your time and tape off the area it's not that hard.
Where can I find those headlights brotha?
Updated the description: www.motodynamic.com/2013-2023-honda-cbr600rr-full-led-projection-head-light-with-drl.html
Can we get an install video on the exhaust and some links for the parts?
I don't have any install videos; there are some on youtube, they typically require removing the tail section to get to the bolts; and removing the heat shield, then cutting or removing whatever part of the tail section you want for your license plates.
What is ur indicator LED color ? White or no change ?
No change
How did u install that mirrors and which model is it from dude?
They are tripage aftermarket mirrors.
You have to drill a hole to pass the wires thru.
I want the head light the mirrors foot pegs and rear tail light
I love that red carbon fiber I want to bay for my Honda ?!?
Very nice.
Thank you!
What material is the Corbin seat? Its two tone!
It's leather
Hey man I just got a 2024 cbr 600rr. I got the same heated grips but my bar ends don’t fit. Can you help me figure out how to get them on?
Mine are after market bar ends; not sure what issue you're having
@@cbr600rr21on the right hand side if I try to put on the bar end. The bar end slips under the grip causing friction between the grip and the bar end causing my throttle to stay open. So right now I’m only running the left side bar end. I don’t want to cut the right hand grip to fit the bar end on. It’s been a hassle. Any chance I could DM you?
How is the fitment of the 1000 rr mirrors?.
It's a little off; it did rip the decal. You also have to drill a hole to push the wire through.
damn thats a sexy machine! almost as nice as my 2015 HRC 600rr
How hard was it to remove the gauge?
It's not really bad; Just make sure you label your bolts. You have to remove and the way down to the bracket that holds the gauge on.