Ferguson FE35 Grey and Gold Restoration Part 19 Draft Link Spring
Vložit
- čas přidán 22. 08. 2024
- In this video I replace a missing draft link spring.
Parts seen in this video can be purchased from.
www.queenslandtractorspares.com.au or call 1300 850 097 in Australia.
If the parts you need is not on our web site, Ph1300 850 097 and talk to us directly.
or
E Mail: info@queenslandtractorspares.com.au
or
Worldwide, www.sparex.com/ and look for a dealer in your area.
Good to see you back - another top video, looking good!
Thanks Charles.
This video helped me to disasemble and asemble draft link on Imt 533,pretty much the same tractor as Mf 35
Glad it helped.
We used to stock the self spreading split pins. You know the ones with the long tang bent over the short tang so all you had to do was drive the loop in farther causing the short tang to push under the long one spreading the tang end so it could not come back out. Explained that to customers and they usually bought several more because of the ease of installing.
Im not sure I have seen them, off to google for me, lol.
They have a funny looking hump loop and when you tap the loop it drives the short side under the long side that is bent over the short pushing the pin apart and stopping it from coming back out the hole. Much easier than having to try to spread a pin in a hard spot. You do have to size the pin for the hole.
Well done Lance! I learnt something watching that, you have to hand it to the blokes that thought it all up John
I am rebuilding three 35X's at the same time. In each case the whole draft control mechanism is rusted solid. Each one is getting a 6 mm. grease nipple discreetly on the underside and and the whole space will be filled completely with grease. This will stop rusting and, more importantly, stop water ingress into the hydraulics.. Fraser Brown.
Yes good idea.
Thanks very much for this video. I will, this weekend service my 135 for surely it has draft level keeping problems. Everything else in the hydraulics is new; only this draft sensor is unserviced.
Good luck!
Very good lecture.
Thankyou.
Good job Sir thanks 🇮🇳👍🚜
thanks Abdul
@@BundyBearsShed you welcome sir 🇮🇳🚜
Can water get into the transmission from thiere, if the boot is missing?
Yes it can for sure.
Good video, but the new bottom yoke with the linkage pin, is upside down to take the top link when attaching any implement. Just saying.
Regards England/UK
Yes I noticed that in editing. I must have been blind.
I am looking for a dimension for the second grinding of the mf35 petrol crankshaft. thanks for help
Look in the free workshop manual at www.queenslandtractorspares.com.au in the technical section.
What position is the draft control lever normally at if you not ploughing or using it.
I believe all the way back.
When setting this up where should the draft and control levers be on the quadrant?
You need to look at the manual as there is different positions for each adjustment.
@@BundyBearsShed thanks I'll have a look
Nice job Lance ..but how do you set it up for a working tractor ? I would like a video on adjusting the PTO clutch on a mf 65 . because mine is out of adjustment .. Cheers ...
G Day Anthony, when I buy the tractors I will cover the PTO etc but only when it is needed. You never know Im always buying something.
Ok
The yoke is up the wrong way in this video, I didnt realise until later.
Thankyou Lance
Thanks John.
Hi Lance.... so to change the rubber boot I have to fully disassemble the spring unit......?
Yes but you can do it without lifting the top off if the big nut is not rusted up and stuck.
Sir I am from Mansfield Ohio and owned a MF 1080 Understanding the 3 point lift on this tractor was difficult for me. for its time this lift in my opinion very advanced.
I hope that at some point you will explain inner quadrant, outer quadrant, and .draft control vs position control. How do settings vary from plowing vs using a disc vs digging post holes
I will cover that when I get to the hydraulics on the 35. I had to read up on that myself to understand it.
Hey mate would this be similar to a massey 185? I need to replace the rear boot on mine but just wasn't to sure on how its done. Cheers.
Yes very similar.
Be a great job if you hadn’t installed the yoke UPSIDE DOWN?
Yeah we did. But not worth re filming.
On the continent (Europe ) we are using a wrench that calls a Churchille key . Dont know it is the correct name.
Ill look it up.
👍جيد نحتاج ترجمه وشكرا
Thankyou.
Why are there two different gold colors on the tractor? One looks more like copper.
G Day Stephen, It is all the same gold out of the same can but some is shaded and some in the direct light from the High Bay 400w bulbs. The metalic flake changer it a lot in different lights.
I noticed near the end of the video some ares went into that shade and it changed the color completely. Thanks for answering.
Color flip. 6:00 is a good example of how different paint can look under different light sources. His torch makes the paint appear copper. Gives painters fits when trying to color match. Camera is not always going to reproduce what the eye sees in person either.
Moze li prevod na srpski jezik
Thankyou.
Goran D.
Yt Channel 👍
IMT 539