Unboxing and installation of IKEA STÖTTA LED cabinet lighting strip

Sdílet
Vložit
  • čas přidán 26. 07. 2024
  • Quick look at the battery powered IKEA STÖTTA LED cabinet light and how I installed it into my IKEA PAX wardrobe.
    0:00 Unboxing
    0:40 Installation
    1:50 Final result
  • Jak na to + styl

Komentáře • 69

  • @Fancylooks
    @Fancylooks Před 2 lety +51

    Thanks, I couldn't figure out how to fix the lamp to the supports, the explanation in the instructions leaflet if not clear, but now I could do it thanks to you!

  • @YAM1878
    @YAM1878 Před 10 měsíci +9

    I really needed to see this video. Thanks for making it. I could not understand how those little flanges were going to hold this light in place. Now I get it!

  • @rebekahshirley8661
    @rebekahshirley8661 Před 2 lety +15

    Perfect - the instructions just don't say enough! Thank you

  • @anna_mn
    @anna_mn Před 3 lety +22

    I needed this video so much! It's a shame Ikea changed the design of this light, it was way easier to install and change batteries before.

  • @ArinMatikkaa
    @ArinMatikkaa Před 3 lety +5

    Thanks! I needed this! Was thinking it wrong.

  • @aury7382
    @aury7382 Před 2 lety +1

    Oh very helpful video for me also, thank you very much!

  • @nicolagiangaspero7172
    @nicolagiangaspero7172 Před 3 lety

    Grazie!!! Stavo lanciando il led giù dal balcone prima di vedere il tuo video!! 👌🏽💪🏽

  • @AntonGorodetsky
    @AntonGorodetsky Před 3 měsíci

    Man thank you so much for this! Way better than the instructions

  • @sineadconnolly8400
    @sineadconnolly8400 Před 2 lety

    Thank you, thank you, thank you! Done, thanks to this video. 🙌

  • @nicosaporito
    @nicosaporito Před 2 lety

    Omg your king! I was ready to return these lights back to ikea. Your video help, ikea instructions make no sense

  • @xtremefamilia9021
    @xtremefamilia9021 Před 2 lety +1

    Too much helpful thank you 👍🏻

  • @sarahgibson9768
    @sarahgibson9768 Před 3 lety +8

    Would be helpful to see what connects where at the unlit side to hold it in place - just keeps falling off

  • @inthevortex-de1rh
    @inthevortex-de1rh Před 3 lety +1

    Thank you very much

  • @eklmn_
    @eklmn_ Před 6 měsíci

    янв 2024. А я пыталась за длинный конец зацепить)))
    Благодарю, прикрепила после видео за 30 секунд)))

  • @LizA-lz3ic
    @LizA-lz3ic Před 2 lety

    Thank You!

  • @jacquelinechapelhardy5225

    I had so much trouble with the clips. Defaulted to double sided tape. When time to change the batteries I’ll figure it out somehow

  • @ayhan0520
    @ayhan0520 Před 2 lety

    Thank you.

  • @jagermeister902
    @jagermeister902 Před 3 lety +6

    I just installed one, but those closing clips don't close very well. The light does not mount steady at all.

  • @ta2090
    @ta2090 Před rokem

    What is the range of these sensors? I.e. how close do they need to be mounted to the door?

  • @lepetitchat123
    @lepetitchat123 Před rokem +1

    how often do you change the batteries?

  • @fleurespicer3567
    @fleurespicer3567 Před rokem

    Aha….thanks so much - got to where the light went onto the fixing, could Not work that out as the instruction/diagram was unhelpful to say the least !

  • @thanussongprasart2568
    @thanussongprasart2568 Před 2 lety +5

    What sensor it has? Proximity? Motion?

  • @kavishsingh6549
    @kavishsingh6549 Před rokem

    Can I reverse the process where if I close the door the light must turn on?

  • @PaulaFernandes92
    @PaulaFernandes92 Před 3 lety +7

    I'm trying to install that light over my sink and cannot do it, I feel like the battery part is too heavy and it's not steady, every touch and it falls 😮 Clearly I'm doing something wrong cause that looks so steady!

    • @sarareaper5301
      @sarareaper5301 Před 3 lety +1

      Same... i have 3 and all keep just turning off after seconds

  • @CometEcast
    @CometEcast Před 5 měsíci +1

    How do I take the batteries out????? I’m struggling

  • @istvanerdos3378
    @istvanerdos3378 Před 3 lety +2

    Hi! Does it turn on in an almost dark environment? We have a wardrobe at the end of a hallway, and there is no lamp close to it. This lamp could solve our problem : )

  • @rajafaiq2096
    @rajafaiq2096 Před 3 lety

    Hey..I was wondering if the light works with bright environment such as daytime on the auto mode..

  • @Aboodykhoja
    @Aboodykhoja Před 10 měsíci

    can it be on always ?

  • @user-or1cc4ge5x
    @user-or1cc4ge5x Před 3 měsíci

    Any magic trick to make the automatic setting work? Simply doesn’t function for me. Have to switch on or off

  • @dennygrim9313
    @dennygrim9313 Před 3 lety +2

    Why doesn't the light stay on when I put it in the "on" position. After approximately 10 minutes the lights go out. Then I can put the switch off and then back on and usually it goes on but I want it on for longer. The batteries are new. Help!

    • @simplehomediy8888
      @simplehomediy8888  Před 3 lety +1

      That is strange, i just tested mine and left it in ON position more than 30 minutes and it didnt turn off by itself. Maybe try with new batteries and if that doesnt help then it has to be faulty unit, take it back to IKEA.

    • @MrPacey05
      @MrPacey05 Před 3 lety

      me too

  • @azrilaiezat5319
    @azrilaiezat5319 Před 3 lety +5

    Is there a mode where it doesnt rely on sensor and they continuously light up ?

    • @carlerikkopseng7172
      @carlerikkopseng7172 Před 3 lety +5

      Yes. But they are battery powered, so I hope you have a lot of batteries and/or recharger :)

  • @user-yt2rs7xx6f
    @user-yt2rs7xx6f Před 3 lety +4

    Why didn't you remove the shelf before installing the lighting? It is inconvenient to install this way. The shelf is not fixed)

    • @simplehomediy8888
      @simplehomediy8888  Před 3 lety +3

      Thanks for pointing that out, yes that would of made the installation a lot easier :)

  • @CEMorgan43
    @CEMorgan43 Před 2 lety

    where can you buy those mounting clips? I have the lights but nothing to mount them with.

    • @alexm24
      @alexm24 Před rokem

      Search ikea spare parts, you can order them for free

  • @paulbenfield8007
    @paulbenfield8007 Před 3 lety

    The light didn't come on immediately when the right door was opened. It did once the left door was opened. Curious where the sensor is and how it is triggered. (Light, air pressure, motion?) Thanks.

    • @simplehomediy8888
      @simplehomediy8888  Před 3 lety

      There is a sensor in the middle of the device, just where 2 doors split. With a brighter day the light turns on with just opening one door. I suppose the sensor is just needs to detect more than a set threshold of light to turn on, it can not be adjusted.

    • @thealexshow350
      @thealexshow350 Před 2 lety

      @@simplehomediy8888 can you tell me why mine does not turn on? Just installed it and it doesn't turn on when door is opened

    • @Samerjundi
      @Samerjundi Před 3 měsíci

      Same thing here, before installing it was turning on my my hand but after installing it in the wardrobe, even its dark, yet not turning on- total disappointment- Chinese product from Ali Express are way better

  • @trinistar1930
    @trinistar1930 Před rokem +1

    Mine doesnt want to close or latch on .🤔

  • @SmolestPotat
    @SmolestPotat Před 2 lety +4

    Is it possible to turn it on/off manually? I need it for studying :)

    • @fredad.7227
      @fredad.7227 Před 2 lety +2

      It is! It has 3 settings: Automatic, off and on. :-)

    • @kalina3604
      @kalina3604 Před 6 měsíci

      My lamp is randomly turning off even if i turn it on… i dont know how to fix it

  • @kalina3604
    @kalina3604 Před 6 měsíci

    My lamp is turning off randomly, even if it is manually turned on. I dont know how to fix it. Can anyone help?

  • @madamz7
    @madamz7 Před rokem

    Instead of screwing on the mount things, could I use double sided tape to hold the light strip up? I’m renting and my current wardrobes came with my room, but they’re so dark. Just not allowed to damage the furniture 😢

    • @shlongis
      @shlongis Před 9 měsíci

      i tried it first to see how it looks and it worked, probably just have to get a strong enough one

    • @shlongis
      @shlongis Před 9 měsíci +1

      32cm - 0.22kg
      52cm - 0.31kg
      72cm - 0.38kg
      i had the 32cm one

    • @tomgunner6926
      @tomgunner6926 Před 5 měsíci

      Trouble with tape is you need to recharge the batteries, which involves removing the unit to access the battery compartment, which frustratingly is on the side you attach to the wall or ceiling. So tape would work as long as you don’t mind replacing it every time you recharge, which for me would be a real pain.

  • @drenzonda
    @drenzonda Před 3 lety +1

    How long do the batteries last?

    • @simplehomediy8888
      @simplehomediy8888  Před 3 lety +3

      Im using IKEA rechargeable batteries in mine and i recharge them about every 3 months. But it depends really how long u have the light on.

  • @aroobalmasoud5271
    @aroobalmasoud5271 Před 3 lety +4

    I installed it but the sensor isn’t working, is it because I installed it a bit far than yours?

  • @TheRiyazSaiyed
    @TheRiyazSaiyed Před 3 lety +1

    I just don't get one thing why outside light to be there when I open the cabinet?
    what if I open the cabinet in complete darkness, I feel still the cabinet light should turn on?
    I don't think this relies on outside light rather on close proximity sensor...

    • @simplehomediy8888
      @simplehomediy8888  Před 3 lety +1

      You are most likely correct when i think about it, it must use proximity sensor.

  • @sarosh15aug
    @sarosh15aug Před 3 lety +1

    How long battery last ?

    • @simplehomediy8888
      @simplehomediy8888  Před 3 lety +1

      I use Ikea rechargeable batteries and they last me about 3-4 months before i need to charge them again.

  • @MayankJairaj
    @MayankJairaj Před 9 měsíci

    Is there a teardown video for this?

  • @AdBlock-User
    @AdBlock-User Před měsícem

    Too bad it doesn't work.
    Bought one a while ago. The light didn't work at all on it. Returned it but took a new one. The new one worked for about two weeks. Then it stoped. Sometimes the lamp lit up if I stood and waved my hand in front of the censor. However, most of the time I had to turn it on manually. But now even that has stopped working. Changing the battery didn't help either.
    Swedish junk products.

  • @mavamv3737
    @mavamv3737 Před 2 lety

    J'ai l'impression qu'il faut avoir un bac +10 pour installer ce truc.. Quelle galère, ca ne tient pas

  • @tsao36
    @tsao36 Před rokem

    This is simply misleading and confusing, why are you marking the screw at the wrong location?

  • @Samerjundi
    @Samerjundi Před 3 měsíci

    before installing it was turning on my my hand but after installing it in the wardrobe, even its dark, yet not turning on- total disappointment- Chinese product from Ali Express are way better