Fixing Common Issue With Bose Acoustic Wave CD-3000 CD Player Not Working Properly
Vložit
- čas přidán 27. 08. 2024
- short video showing a common issue with Bose Acoustic Wave CD-3000 CD player skipping or not reading disc.. full teardown video will be posted soon so you can fix it yourself! its not as hard as you think!
I cannot thank you enough for this video! 30 year old BOSE back in working order.
Glad I could help!
This fixed my problem! Thanks so much !!!
Glad it helped you!
I can not find you video for the bose cd3000 tear down can you please send me the link. Thanks for your time and help
Did you I post the tear down video? Thanks!
Excellent demo , I would like to ask if have idea how can I connect my Bose Cd-3000 with external USB
you will need a MP3 USB module that runs off 5v DC.. and old phone charger would suffice for the 5v DC to power the USB module.. take the AC power from the Bose AC power supply board to power the phone charger.. Dremel a cutout for the USB input somewhere on the Bose.. run the output from the USB module internally to the AUX IN on the back of the Bose.. then your all set.. i prefer Bluetooth.. so you can just pair it with your phone.. but thats just me.. USB is old school..
@@kyfeam thanks so much for that advice I will check for it thanks again , best of luck
How do I troubleshoot the Bose CD 2000?
Thank you
Thx
Your welcome!
thank u kyfeam
Your welcome!
Whatever happened to the tear down video??? I need that now.
Life happened unfortunately.. hopefully have time over the winter to make a video..
Name of video tearing down bose 3000
i have one that won't spin the cd. if you flick the cd to start it turning sometimes it will take off and play. any help?
may need to adjust the laser power.. or clean the lens with a q-tip and windex.. outisde of that without it in my hands i cant give you a definite issue.. good luck..
No more likely spindle motor. Every one all about the laser. In my day spindle motors where common and if you sprayed switch cleaner inside the motor and a little on the shaft would normally work but it would need replacing
it worked thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
glad i could help!