How to Install High Quality Fender Flares by EGR
Vložit
- čas přidán 13. 05. 2023
- In this video we install a set of EGR Rugged Fender Flares for my GMC Sierra AT4. They are high quality and look OEM
EGR Product Discounts! bit.ly/42FW10A
Use Coupon Code : donslife
More EGR USA Amazon Store : amzn.to/3WFSFYy
#egrusa #egrfenderflare #mod
linktr.ee/donslife - This has link to all of my products and discounts
Contact me for questions, collaborations and product reviews:
Instagram: / donslifechannel
email : donslifechannel@gmail.com
Product Links:
Viair 2.5 gallon air tank 150 PSI : amzn.to/3iacff7
Radenso Pro M Radar Detector : amzn.to/3EEz1oz
Universal Mirror Tap : amzn.to/3q8X9aB
Megulla Interior Ambient LEDs : amzn.to/3zjynbS
Under Hood Light Kit : amzn.to/3brYkOh
XPEL Paint Protection Film : amzn.to/3LjPaiW
Thinkware Q800 Pro here (US) : amzn.to/3MHTmtJ
Tailgate Step Lights US : amzn.to/3uucAwY
Tailgate Step Lights CAN : amzn.to/35ZQSr9
Auxbeam 3" LED Pod / Ditch Lights : shrsl.com/3nnvv (Code : Dons or Donslife)
Auxbeam 8-pod Rock Lights : shrsl.com/3m36a (Code : Dons or Donslife)
Auxbeam LED Switch Panel : shrsl.com/3m35z (Code : Dons or Donslife)
Rough Country 20" Black Series Dual Row Cree LED Light Bar w/Cool White DRL - 70920BD: - Out of Stock on Amazon
Putco 529005 Blade Quick Connect Harness For 2019+ Silverado/Sierra 1500: amzn.to/33EMvjX
amzn.to/3g8EGWB
Bilstein 5100 Front Shock Absorbers for AT4 & Trailboss amzn.to/3pgGVN7
Burger Motorsports BMS Stage 1 Tune (BMW) :
burgertuning.com/?rfsn=620226...
Dragy GPS Performance Meter :
dragymotorsports.com/?rfsn=57...
Fog Light Mod - GM Sierra : boostautoparts.com/
Get SLIPLO Here : amzn.to/3sjrZ0l
Exhaust : Here is a link for a louder version (ATAK) on Amazon. Mine is part 140774BC (BC = Black Chrome Tips). So many versions to pick from - do your research!
Borla-140775 Silverado/Sierra 1500 6.2L 2019 Cat Back Exhaust ATAK: amzn.to/3l9VYq6
AirLift 88388 LoadLifter 5000 for AT4 & TrailBoss : amzn.to/3wZnIQy
Air Lift 25980EZ WirelessONE Compressor : amzn.to/3y09CzI
BlueDriver Bluetooth Pro OBDII Scan Tool for iPhone & Android by Lemur Vehicle Monitors : amzn.to/3mtC8Vz
Veepeak OBDII Bluetooth Scanner for BMW/Bimmercode App: amzn.to/31V91kl
Veepeak OBDII Bluetooth Scanner 4.0 for BMW/Bimmercode App: amzn.to/31SIHaw
Hyperdip for emblems, wheels and trim: www.dipyourcar.com?ref=872
Plasti Dip for emblems, wheels and trim: www.dipyourcar.com?ref=872
Tint, vinyl, tools, and bolt on mods used on my vehicles products:
VViViD Premium Utility Blade (my favorite): amzn.to/39TIUP3
3M Knifeless Tape: amzn.to/3dHMlti
VViViD Smoke Black: amzn.to/3rXYno7
VViViD Dark Black : amzn.to/3d3tlH5
VViViD HEX+ Dark Smoke : amzn.to/3ae1bqW
VViViD HEX+ Light Smoke : amzn.to/2N18WHQ
Ronin Bullet Antenna Ford/Dodge : amzn.to/3mvoukM
Ronin Bullet Antenna Chevy/GM : amzn.to/3dMakYb
BMW Red M Buttons: amzn.to/3uuXyUS
BMW Red Start/Stop Button: amzn.to/3rZVuTg
Nextbase Dashcam HardwireKit: amzn.to/3mvpiGk
GMC Sierra AT4/SLT Chrome Grill Overlay (can be painted): amzn.to/3tcEdaZ
GMC Sierra AT4/SLT Chrome Grill Overlay Gloss Black: amzn.to/3wzalHI
Shine Armor Quick Coat Ceramic Coating: amzn.to/2OASS0j
DOSE Spider Silk: amzn.to/3h7v2EB
or VViViDshop.com
VVIVID Fuse 5 year 9H High Ceramics Hydrophobic Coating: amzn.to/2Rg1JFE
BMW F-Chassis BMS Hub Centric Wheel Spacers: amzn.to/322OTwF
BAK BAKFlip G2 Hard Folding Truck Bed Tonneau Cover: amzn.to/3qWuzLj
BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover: amzn.to/3s6rl4H
CTEK (56-926) Lithium US 12 Volt Charger: amzn.to/3gcuiP1
Richeer 1.5" Wheel Spacers for GMC 1500: amzn.to/3t4OJRn
Rexing V5 4K Budget Dash Cam : amzn.to/3Acvxou
Disclaimer: Some links may be affiliate links, meaning I earn a commission when you make a purchase. Thank you for the support!
Music Credits:
CZcams Audio Library
Bliss by MusicbyAden | / musicbyaden
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/... - Auta a dopravní prostředky
By far the best customization channel I've seen! Who provides the actual links to everything. With proper installation details. Thank you sir!
I try 🤷🏻♂️
That looks 100x better now 👌
That’s a lot of times better. How bad was it before? 😂
@@Donslife it wasn’t bad before 😅 but I think the color matched flares look better then black…
@@Donslife HORRIBLE!!! The stock chintzy black "flares" on the GMC's look like complete crap. I also hate the angled look of the wheel wells on the GMCs and the stock black just outlines the problem on anything other than a black truck.
Looks pretty good Don good stuff!
I love this mod ! I’d have to sell my over priced GM mud flaps though.
Nice work Don!
At first, I didn't think I would like this but it really looks awesome!
Great job, Don!
Thanks man I appreciate it. Some people are devastated with some of the mods but way more happy to see me sharing information
My local dealership has a few 2023 Sierra trucks on their lot with these fender flares … to be honest they look great in person … along with those trucks having this mod there’s on that caught my eye as it was siting on some rims that resembled the ones on dons truck
Overall not a bad look it suits the truck nicely
Another good set of flares that doesn't look like it just rust bucket conceal kit. Deffinately want a color match. Less noticeable the better.
Seriously though, they do look great. Especially how easy the install was
That looks outstanding, Don!
Thanks, some folks agree and some don’t. I am getting pretty used to creating controversy with my choices 😂
@@Donslife The haters pay more. 🤑. I love this channel and appreciate your hard work. Maybe one day I’ll do some exterior mods to my blacked-out ‘23 AT4 Yukon XL. Because of you, I bought the armrest charger and IA Android device. Maybe the VanTrue camera too (was that you?). Cheers.
Nailed it for sure Don, just what I was looking for…thanks again💯💯💯
Glad you like them. I have seen some flares on these trucks, but they all look the same
@@Donslife Right on, The guys at EGR went above and beyond my expectations on the ease of installation and offering multiple options!
I like the looks of these on your truck. I really like the no rivet style and how simple they were to install . Maybe it's just the camera/video, but that ever so slight difference in the color matched white would drive me absolutely bananas.
It’s funny the camera makes the color seem a tiny bit off, but in person not really at all.
Those look awesome! Definitely worth it to lose the stock mudflaps...may put these on my list to add after new wheels/tires!
Very tastefully done!
Thank you kindly!
Another epic vid mate. Would love to see them wrapped in the black camo.
Those are just right! I found a kit for my 2022 Durango, but they look too wide, almost funky wide - no flow. I'm on the fence, but this was clean and classy! Nice!
It wasn’t an easy search unless I wanted to really bulky
Hey Don I usually don’t like fender flares on trucks. Here in WV some of the guys over do it, a little large for my taste but those look factory it’s like your truck rolled off the assembly line with those, great job and thanks for the video.
Thank you for watching and leaving this comment
“Smooth enough to wrap”
Hmmm…🤔
It looks really good what do you have for muffins?
Muffins? I like Blueberry muffins. If you meant mufflers, then the answer here is a Borla S-Type Cat-back system with quad tips
I guess you’re not going to put the mud flaps back on because it would be to tight in front ✌️
I would have that problem with mine I think if I changed to fender flares I will have to look at the video a couple times
I have Trigger Industries mud flaps on and it’s tight now 🤷
Great video Don Looks Great 👍✌️🇨🇦
The flares cover the mounting holes where the flaps go. I was hoping to see how the flaps in front of the rear wheels stay in place and the flair fit over them. My Rough Country flares for my Silverado require removing all of the mud flaps. I ended up putting on some generic flat SUV ones I had purchased for another vehicle I had laying around to try and keep too much winter slop from hitting the bottom of the cab and getting flung into the rear bumper.
Looks good Don. When water gets in behind the flares, as it will for sure, does it just drain down to the sides and out, or do you think it could get trapped in there? I guess my question is really whether the design includes consideration for water drainage and drying behind the flares. Cheers from Ontario!
I had a look after reading this comment. I don’t see drainage as an issue, but I am sure dust build up will eventually get wet and accumulate some crud
@@Donslife the clip design makes me think you could take these off a couple times a year if you wanted to wash underneath them and get all the built up crud out. That’s always the thing I don’t like about flares (I have them on my truck)… the fact that I don’t know what’s sitting on my paint underneath them forever and never getting cleaned/decontaminated. Thx
Nice mod. I was skeptical at first.
Glad you like them 👍🏼
Don, What about doing a like 1 inch vinyl wrap on that edge that touches the truck to give it a seal and cover that black rubber. I would like to get a silver set like this for my GMC and would want to cover up that black seal.
I am working out a preventative measure. There are some paints that will stick to weather stripping and remain somewhat flexible, but you’d only want it on the exposed sides
Those look fantastic! Did EGR paint them for you and if they did what was the additional cost?
EGR did paint them, but they can't offer that service for every situation. Luckily for me they had some of my paint code available for this and sent them to me painted. If you look at some of the pricing models you can do the math on the ones that at painted and not painted and calculate the difference. I think it works out to $100 per flare for the ones I have. Still best to confirm with them. Most local body shops here charge a $500 minimum for any project that involves paint matching.
Which mud flaps are those. I just got my 23 at4x and was looking for a pair for it. I have been having troubles finding something that is an exact fit.
I took all of my mud-flaps off. They were the ones that came with my 21 AT4 from GM.
Honestly feels like you’re going in circles. You installed spacers with your stock wheels to give it a more aggressive stance, then you swapped the wheels and tires entirely and now you put fender flares on that effectively tuck the tires back inside the body line.
😊
As it should be. Saves the truck fenders, body and those behind you.
like always great video i am spending to much money because of you hahahah. where can i get it in white to mach my denali summit white ? i see it only in black on the website thank you
Nice 😂 Have a local shop paint match them. They only have some colors available from time to time with black being the most common
Hey Don, great video! How is the performance of the Fender flares so far? Did you go over the Winter with them? How do they tighten to the buddy of the truck? I would appreciate your feedback. I am really thinking of buying them.
This will be my first winter with them on so we’ll see. They clip onto the existing wheel well trim quite well. No drilling
Thanks for the comments, very well appreciated! I really like the blacktop on the truck! It is very unique! Do you do wrapping for a living!
@luisfabiangattornoborrell9421 thanks, not for a living, just for fun on my own stuff
Did you order the from EGR already painted or did you have the painted somewhere else? I don't see the paint option for those flares on their website. Thx
You can try and contact them and inquire which paint codes they stock. I don’t think they can offer all of the various colors all the time. Mine were painted by them though.
@@Donslife Thanks!! Keep up the great content and awesome mods!!
I had a problem with them scratching the paint on the truck. Dirt gets between the rubber and paint like sandpaper. When I removed them I had scratches all around the rubber weatherstripping on my paint. Just a heads up.
Might add some PPF if I don’t wrap the truck
My buddy put a clear wrap under his, seems to be working for him.
@@Donslife I was going to comment on this. I looked at pictures of Rough Country's demo Silverado when looking at various flares and could see where they had rubbed the paint. I bought 1/2" PPF film and used a grease pen to outline where the fender edge would be and applied the film inside of that line to prevent rubbing against the paint. Dirt and dust does get between there. I replaced the stock edging on the Rough Country SF1's because they didn't have any adhesive to stick them to the flare and it kept vibrating off on the top of the rear ones for some reason. I bought some that had adhesive inside the groove and no more issues. I did find some flares that use adhesive against the vehicle side as well. I haven't looked into what kind of molding it is or how much it cost yet.
Where did you buy fender flare. Thank you
New Product Discounts! bit.ly/45bFEsd
Use Coupon Code : donslife
Fender Flares =$50 rebate (Visa or EGR Gift Card)
How good do those clips hold at highway speeds? It seems to me that eventually a gap will be created where the weather stripping is and the wind will pull it off
I know why you’d think that, but when you see them in person, they are super tight
@@Donslife Just wait for a winter or two of that Canadian winter salt and let us know how the fair.
I will have a wrap or ppf in between
Hope the gaskets don’t rub the paint off! One thing I hate about mine
I am looking to install some ppf behind them if I don’t wrap the truck anytime soon
First
You probably have the most firsts! Stick around for the montage
Hi Don. I'm considering these EGR flares. Would you happen to have a discount or promo code for this product?
I am not sure. I sent an email to ask them.
Hello! I heard back - There is not anything right now, but they are working on some ideas/programs for the future. I know it doesn't help you now, but that's all I can tell you for now.
@@Donslife Thanks Don for taking the time to respond. I will probably still move forward on it soon.
What size tires are you running?
285/60 R20. 0 offset 20x9 wheel
@@Donslife did you order these already painted from EGR? I didn’t see an option for that.
@@jayk.2276 I did but my timing worked out as well as it was a limited time option at that time. You can’t order white at the time of writing this. Black I think is sometimes available since it is more universal than my white paint code.
Those wheels have got to go. Too nice of a truck to have such cheap and weak looking wheels. Love the videos!
Nothing is forever but there does seem to be quite a divide out there on the styling.
New Product Discounts! bit.ly/45bFEsd
Use Coupon Code : donslife
Fender Flares =$50 rebate (Visa or EGR Gift Card)
RollTrac =$200 rebate (Visa or EGR Gift Card)
More EGR USA Amazon Store : amzn.to/3WFSFYy
linktr.ee/donslife - Links to all of my products and discounts
Not a fan, think truck looks better stock with maybe just some wheels.....think you can just go too far with mods....just get an AT4X.......actually 2500 HD version since you tow anyways
It isn’t my forever truck so anything can happen
The best change you could make is to remove that General Motors emblem, and put a Blue Oval on it. Lol😅😅
Bullies are so out of style 🤛
@@Donslife dude, you've seen me. I have no style. Lol!!
Can you please change those rims. They're so FUGLY
I like them and for now they’ll stay. I can’t please everyone either. Sorry man
Really like the look of those, wish they could color match the weather seal too. Have you gotten it to rub yet? I catch a random rub while turning at an incline sometimes like pulling in somewhere and the entrance has a slight hill.
ᵉᵈᶦᵗ: ᶜʰᵉᶜᵏ ᵒᵘᵗ ᴮᵃʲᵃ ᵈᵉˢᶦᵍⁿˢ ᶠᵒᵍ ˡᶦᵍʰᵗ ʳᵉᵖˡᵃᶜᵉᵐᵉⁿᵗ ᵖᵒᵈˢ
No wheel rub yet. More aggressive testing will continue.
I did go with the 275/65R20 with ReadyLift level and the same Bilstein 5100 shocks front and back so I was flying a little too close to the sun and did have to push the liners back. I did reach out to Baja and recon, told them I buy most of the stuff you shill, Baja just blew me off and recon did reply and seemed surprised there were no videos featuring their GMC taillights as they sell "tons of them" but stopped short of any promises! 🤞🤞🤞
@@_____mh fingers crossed indeed!