Homemade Motorized Camera Slider
Vložit
- čas přidán 21. 08. 2024
- How to make a Professional DIY Camera Slider- Arduino Projects
In this video, I show how to make or build a Homemade but professional DIY camera slider with an Arduino microcontroller. This DIY camera slider has 2 axis which gives good cinematic shots for your project. The complete cost for this project is below $150. You can download the code for this Camera slider from my website. This Professional DIY Camera Slider is simple and easy to follow. The links for the parts are mentioned below.
Instagram- / shinedjar
Facebook- / rztronics
Twitter - / rztronix
Code & Schematics for Arduino Camera Slider-
github.com/Raj...
*NOTE* - To install Libraries follow www.airspayce....
Parts for Arduino Camera Slider-
Stepper Motor- s.click.aliexpr...
A4988 drivers- s.click.aliexpr...
Arduino nano- s.click.aliexpr...
GT2 20T Pulley- s.click.aliexpr...
GT2 Belt- s.click.aliexpr...
GT2 40T Pulley- s.click.aliexpr...
Oled Display- s.click.aliexpr...
End stops- s.click.aliexpr...
Encoder- s.click.aliexpr...
LiPo Battery- s.click.aliexpr...
Bearings- s.click.aliexpr...
Derlin wheel- s.click.aliexpr...
GT2 200mm belt- s.click.aliexpr...
ball head camera holder- s.click.aliexpr...
Aluminum 2020 extrusion- s.click.aliexpr...
Tevo Tarantual 3D Printer- s.click.aliexpr...
3D Printer Filament- s.click.aliexpr...
Music-
Lowrider by Joakim Karud
• Lowrider by Joakim Kar...
Iaan - Don't Go
• Iaan - Don't Go
#arduino #diy #homemade #camera #electronic
Wow, this is a super nice 2 axis camera slider. The turn dial / push to set programming is a really nice touch. Truly inspiring. You should be very proud to be so creative.
I have had a similar design to this one in mind FOR MONTHS now.
T-slot is a great and inexpensive option that also has great structural stability.
I am recylcing parts from a 3d Printer and a Telescope so I can mount a 120mm refractive scope, or a caged camera/ gimbal onto it for motion lapses/ Star shots.
Thanks for the video! I appreciate this insight. I have been trying to rack my brain aroung cable management. You have solved my dilema. A single t-slot down the middle of my design. (I am using 2 3/8" and 2 1/4" rods for my railing system to provide as much stability as possible. )
Using the parts I have from each gives me the stepper motor need for my Belt drive, by I plan on using the existing pan/tilt electronics and encoder motors from my telescope to provide a badass optics platform.
After the initial hardware/coding works, I will be printing casing for the components to shield them from the elements.
Damn...never knew one video could open up my mind to so many possibilities! Very Practical.
i would pay for a step by step tutorial for beginners
this was beautifully done. Great work RZtronics
Thanks for being more realistic with the cost of the materials used.
Awesome project... I want to build this one... Thank you so much RZtronics... One suggestion to add a fan in the control box for the drivers then it will be perfect... Cheers...
One beautiful slider I would even consider buying this its so bloody good.....
3d files/stl could you upload ?
VERY NICE project! Awesome video results you got - congratulations! 🎉🎊🎈🍾
Awesome project. Like that you started the video with slider shots.
И ещё идеально было бы, плавный старт и замедление в конце движения. Если это не очень сложно то сделайте это. Спасибо.
And it would also be ideal to have a smooth start and slow down at the end of the movement. If it's not very difficult, then do it. Thanks.
Wow! That's a great project. Thanks a lot. It very useful. cant wait to build one for myself. The code works great.
I am a filmmaker and DOP and based on my experiences I have a few suggestions.
1. Could you include Acceleration control input as well. I read that the Accel Stepper library supports that.
2. An option for the third motor will be great for the Tilt function.
3. Can you have a menu with an optional function to bounce continuesly between point A and B for Interviews in a loop
4. As an upgrade it would be wonderful if you include the AS5600 Encoder module with magnet for marking positions. Manually positioning the camera is always a better option for Cinematographers.
5. Lastly can you also extend the code for a camera lens focus focus motor.
Thanks again for this wonderful project.
yip!
Dude Holy shit. That was done so damn cleanly. I'm working on something like this for the Ender 3. For timelapse and it's driving me crazy
Can i Get #D files
Software works just as it should...
Going to design my own slider hardware in Fusion 360.
Big thanks for the sourcecode!!!
The software works for me too. thanks for RZ. my only issue is the jerky and bouncy position adjustment with the rotary encoder. If you don't mind will you able to help me. I tried different delay options but still very jerky and bouncy rotary. Thank you
So satisfying to watch!!
What are capacitors for?
To stabilize voltage on motors? Why?
Hello, that’s a wonderful project. Congratulations 🍾. Is it possible to have a step by step tutorial to build it ?
Nice! Hope you come back with more awesome diy project
Good choice of construction. I have a different Arduino slider kit and it isn't very sturdy plus it has some jitters so I want to rebuild it with extrusions. Capturing the main rotation bearing inside the platform with a bolt down plate is the first time I've seen how to do that. My kit is a pressure fit of the bearing to both the carriage plate and the camera base over the bearing which IMHO is nonsense. Finally, that's an interesting calibration you programmed, having separate start and end aiming points for the Y value.
Nice build! Total time required 1 billion hours, I wont live that long, but I did enjoy the video.
Nice, shouldn't be a problem if you have some knowledge attempting this as a DIY.
Nice video ! Thanks for it ! Thumb up !
Wanna make one, do you have a full tutorial video pls.
A lot of part not clear and miss out...like you use a transistor but not sure which is that . Thanks !
Great video thanks for sharing
I checked on the extrusion from the link you provided. Estimated delivery was April 14. Today is February 10. Really cool project! Have you ever tried to slap the DSLR on it? I would think it's easy enough to scale up to handle the larger weight. Thanks for sharing!
wirklich sehr schönes projekt 👍
Great job!
Beautiful design!
On the wiring diagram, it shows a 12v and a 5v inputs, did they both come from the single battery?
excellent, but is the choppiness due to the stepper drivers? or just stability. thanks
Well done! Thank you
Nice looking project!
Excellent project 👍
..and where is the STL files for the 3d prints?
Waw!! Very very nice! It's percect!
Could you please upload/share the 3D printed parts stl files?
Seconded!!!!
Impressive
Really Superb👍
nice job!
awesome!
hi, may I know where can get the STL ?
thanks
We manufacture such sliders and guideways for your DIY projects :)
hello , the link to have the code is dead , can you re-upload please ?
Hi, do you have the project of the components printed in 3d, the support base for the camera, the support base for the slider, and the box?
Is it possible to send it...
A great work you did there, very simple and well elaborated...
I need them too!
Great, I have NO NEED for such a thing but still I want to build it.
Very helpful. Thank you. Has anyone built a 3 pan modification?
Perfect
Reupload or dejavu?
Look great and I wanted build one, but could you please update the aliexpress links with info on what to buy. fx. "GT2 20T Pulley" don't really give an accurate description on what to choose when going to the link gives you lots of choices like 20T W6 B6.35, 20T W6 B8, 20T W6 B4, 20T W6 B5, 20T W10 B5, 20T W10 B6.35 and 20T W10 B8. Same with most of the other tings.
Congratulations on your work.
I have placed all the components on a PCB board.
Everything works very well and as you predict with one exception.
Rotary encoder turns upside down.
Reversing the numeric values (PinCLK 3) and (PinDT 8) to (PinCLK 8) and (PinDT 3) does not work at all.
Of course I also change the (attachInterrupt (digitalPinToInterrupt(3), Rotary, RISING); to
attachInterrupt(digitalPinToInterrupt(8), Rotary, RISING);.
Also shift pinMode(PinDT, INPUT_PULLUP); one position up but the motors remain dead.
As far as I know, the position of the pins on rotary encoders is not a critical issue.
I can't figure out what exactly I'm missing.
Can you help?
Thank you very much.
Hello!! Arme el slider...el riel es de 100cm...pero el código permite que use 50cm...dónde puedo modificar la distancia?? Está muy bueno !! Gracias por compartir!!!
Why don't you post the stl files of the parts?
No MultiStepper Libraries!
It would help if you can supply the stl files
Nice work :) how slow can u make a travel with that?
Hello sir I'm using 3 motors (3 axis)
Can I modify this code sir
I like the way you control the motion
Didn't see what component(s) used that allow the platform to slide on the 2020 rails. Are there internal wheels or so something?
Can you kindly give the STL files for this project
the similarities between the slider and 3d printer are uncanny.
Great work .. amazing.. My i ask for the 3D (.stl) files ?
Nice one!!! I just wonder if I could have a copy of the 3d files.. TIA..
hard to understand the construction albeit it's so beautiful to design and realize.
It's not hard. It's just modern people are too dumb and lasy. You can learn all that stuff with just CZcams and google.
Exelente
Hi, Sorry for the question, but I'm trying to build your Slider, and my Arduino IDE can't fine the file MultiStepper.h. Where it is?
where are the 3d files? someone got it?
Hi, could you send me the 3D print file?
Hello, thanks a lot for sharing design and code, I have tried to replicate it with few design changs, can you please clarify the component and wiring on 4:57, it's not on the schematics you provided,
That's a voltage regulator to bring down the voltage to 5v from 12v.
Which software u use for video editing?
4:38 How much will this soldering iron helping hand cost?... I wanna have it..
About 8 bucks on eBay, just look for helping hands
@@route-249 OK... Thanks a lot!
Hi, how to make it go between two points in a loop?
Anyone has made a complete component list maybe? Like exact components, and the number of them? I am a bit afraid of ordering and missing some parts, then having to wait a month or two more, for rest.
Can you says all details equipments you used to make that
Привет. Интересное решение. Хотелось бы иметь не 1 проход. Иногда нужно пройти с лева на право а потом с права на лево... возможно пройти 2-3 раза... не меняя параметров движения. Можно ли в программу внести добавление этой функции. Нужно добавить в конце каждого прохода меню, в котором будет 2 параметра. вернуться или сброс...
Спасибо.
Hi. Interesting solution. I would like to have more than 1 pass. Sometimes you need to go from left to right, and then from right to left... it is possible to pass 2-3 times... without changing the movement parameters. Can I add this function to the program? You need to add a menu at the end of each pass, which will have 2 parameters. go back or reset... Thanks
I taked everything but what missing guess? 3D STL file what i do right now.
Hi, what resistance use, 5 minute in the video?
Hello
great video, great work
a question why only one switches off?
Thank you
What do you mean?
@@duncanmascarenhas8155 limit switch yes only on one side slider
@@walterkuhl4978 because the limit switch is used to only bring the gantry plate to the home location. After that, you have to set the distance for it to travel. it will travel only that distance and return to the home position.
@@duncanmascarenhas8155 ok
Where can I get the stl files as I've got almost all the stuff to build this. Thanks!
انا اول مشاهدة ههههههه
Great job! Thanks for sharing.
I see a lot of shake and wobble in your first previews captured by the slider and it scares me. Is it because the belt being loose? Or the wheels are not in good grip the extrusions profile?
it's just poorly made. Too loose construction. Stepper motor speed is too high. A lot of things.
But nice try.
Funcionará con el NEMA 17HS4401?
The Link for the Arduino Code isn´t working
could you post the code? the link to the page is broken.
Is there a version that does not involve a 3D printer. I don't have a 3D printer and I don't know anyone who does.
not able to download library plz help
Having started to look up the parts on AliExpress - It's a real shame about your unresponsiveness to people on Facebook and lack of replies to comments here :( .
You seem to give just enough information to peak interest, but not enough information to actually build one.
I say this because:
You list ALL the parts (with very basic info) which is great.... BUT, and it's an important but, the majority have different sizes available or different widths so there's too much information missing to avoid wasting money on wrong parts. You also seem to never respond to anyone asking for the STL files for the 3D Printing parts which is also very disappointing. What you've done is great, it really is, but it's all let down by the lack of information provided. Either show off your skills and projects and give NO details on how to DIY one, OR, Give ALL of the details comprehensively. You seem to sit in the middle of this spectrum and give some information to promote giving it a go, but not enough information to actually succeed which is a real shame.
So, here are some questions:
1) Where can we download the STL Files?
2) For the GT2 20T Pulley, what is the bore? and what is the width? (I'm presuming it's 5mm bore for the NEMA motor, and 6mm "standard" width - Based on belt size)
3) Same question for the GT2 40T - but again I'm assuming it's 5mm bore, 6mm width? (Based on belt size)
4) The OLED is 0.96" 128x64 I2C (In case anyone couldn't tell from the video) [this is just letting others not, not really a question]
5) What LiPO Battery did you use specifically? They're different MAh, which means they can be powered longer BUT the main reason I ask is due to the dimensions since the larger the MAh, the larger the batttery - so which one did you use?
6) Just a statement again, but you should list the 47uf Capacitors in your parts list
7) What Length 2020 rail did you order? Does it even matter? I had a very quick look at the code you provided and don't see a pre-set width so does it calibrate first? Eg, it runs until it hits an endstop and then uses the travel distance to determine it's length?? (I only skimmed over the code so I may have missed it if you have set in a width)
Finally, your rztronics write up link is STILL missing the 3D STIL files as well as a parts list even though you published it over 2 months ago.
I don't write all this to be discouraging, actually the opposite, this is really cool and it's great you want to show your work to others and give them some of the info to DIY - but please, give ALL of the details, INCLUDING the STL files!
Just reply this man, I am waiting on the same thing.
Really, if you cannot figure out the answers to those 7 questions, you will have no clue about how to build it. I answered those in 5 minutes. Just follow the links he give and all the specs are there. Do you want him to build it for you?
I agree. He gave us just enough info to be inspired, but he could have provided an in depth explanation to help those of us that are still learning.
I am in a process of building the slider. I can't work out the limit switch. I am stuck on homing
I'm a custom fabricator but nonetheless he gave us all this stuff for that specific design and leaving out STL files for reference makes it very difficult to make your own. I always give out my STL files on stuff like this and I've done it for well over a decade so I don't get what the hang up is
please give arduino code and stl file,I realy need to this project🙏
Learn it then.
You're going to have to debug code.
You may want to look into g-code, and even 3d modeling so you don't have to rely on copy pasta.
Read the description!
The link to the sourcecode is there...
And make your own .stl-files instead :-)
What would I have to change if I wanted to make this but longer? @RZtronics or anyone else
Nothing. just the rails and belt
Hi, your web is down, any other download option?
❤🔥👍
No tiene en venta?
why u r not using u r own 3d printer
can I buy it
BRO_PLEASE_PROVIDE_3D_FILE
Can you publish the 3d model?
First sout out me
Hello!!
@@RZtronics hi what happened reposting this video after so long time , hope that you are fine and will continue to make awesome diy project .
Hi, i can use 28BYJ-48 motor?
Yes, But I am not sure if A4988 supports that motor..
what voltage are the capacitors?
16v
Hey please can you send me the stl files and code?
Can we buy from you
Has anybody tried connecting everything Arduino r3? And there is no mention in the schematic drawing for the mosfet, any idea what and how to plug it in and the values etc.
Ok I have figured out the mos is to dip the v from 12 to 5v. I still cannot figure out why Arduino Uno doesn't work.
lm7805 voltage regulator
I am stuck on the endstop, is it always on state and when it homes is it off?
@@CadAxe3D figured it out, using 3d printer endstop 5v in ground and grin cable in the pin 11. Works great.
Ciao RZtronics, puoi condividere i files STL. Grazie
hi,please give stl files and source code download linke