🟢 DIY Motorized Camera Slider - Arduino Project 👉 FREE PLANS 👈
Vložit
- čas přidán 21. 08. 2024
- In this video i show you my homemade motorized camera slider controlled with Arduino Nano. Please like and share this video if you think it's helpful. Thanks for watching
All plans I ever made I collected in one place. Save this link for future - I will add new plans to this collection and don't forget to subscribe to my channel to stay tuned.
drive.google.c...
Support GRINwood:
PayPal: grinwooddesigns@gmail.com
Free Plans:
drive.google.c...
Sketch:
drive.google.c...
Circuit:
drive.google.c...
Project components i bought online:
- Timing Belt:
www.aliexpress...
- Bearings:
www.aliexpress...
- Timing Pulley:
www.aliexpress...
- Track guide wheels:
www.aliexpress...
- Camera tripod ball head:
www.aliexpress...
- Furniture nuts:
www.aliexpress...
- Stepper motor + ULN2003 driver:
www.aliexpress...
- Arduino Nano:
www.aliexpress...
- Limit switches:
www.aliexpress...
- Potentiometer:
www.aliexpress...
Free plans woodworking videos:
• 🟢 My Homemade Table Sa...
GRINwood shop:
www.etsy.com/s...
Follow GRINwood:
/ grinwoodprojects
/ dakhnogregory
/ grinwooddesigns
/ grinwooddesigns
Music:
Композиция "Pop Metal" принадлежит исполнителю Audionautix. Лицензия: Creative Commons Attribution (creativecommon....
Исполнитель: audionautix.com/
Clover 3 - Vibe Mountain
Parasail - Silent Partner .
Would you like to use my videos in your media projects?
Please contact me: grinwooddesigns@gmail.com
For more details, read description to video. Please like it 👍 if you like it.
All free plans I ever made are here:
drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing
GRINwood shop:
www.etsy.com/shop/GRINwood
Support GRINwood:
PayPal: grinwooddesigns@gmail.com
Thanks for watching
Thank you, @GRINwood. Great video. I just have one technical question. How camera's angle is controlled? Is it somehow centering itself by tripod ball head?
@@liveriesfsx9352 it's controlled with U-type profile on the bottom, just set up the profile. If it's parallel to rails camera will not turn, if diagonal - camera will follow the filming object, just set it up correct. Here i show how it works 12:50
Thanks
@@GRINwood
Thank you, I missed this detail.
Смотрю твои ролики и вспоминаю рабочих мужиков 50 -х - 80 годов, с которыми тогда работал сколько было рукастых изобретателей и рационализаторов.Сейчас таких как ты единицы.
Congratulations, you are incredible! Hugs from Brazil!🇧🇷
Я поражен! Мало кто из тех, кого я знаю, способен подобное повторить. Аплодирую стоя!!! 👏
Perhaps best slider and construction thereof I have seen! The slider will not be replaced by the gimbal just yet!!
Best I've seen yet... When you write "Sketch" I think you mean "Program" or probably "Project".... only thing I'd add is that the anti-parralax guide rail ( for pointing at subject through the full travel of the slider) would need to have a slot instead of a hole at each end to accommodate the different length depending on the angle. If you want a pipe that doesn't bend you can use thin-walled steel pipe, no guide bearings necessary, super light... wouldn't it look good made of sheet metal instead of wood... very good design, Bravo!
great idea, only comment is on the sketch part. that's just what Arduino calls it's program.
Nice! I couldn't believe that this tiny stepper is strong enough to pull this.
I was watching this video purely out of curiosity and learned how to make my own "T" track. Thank you.
I noticed the t-track idea to build myself.
amazing from start to finish
Gute durchdachte Arbeit - Top 👍
Hello my friend! I want to say thank you for the sketch, you helped me out, health to you and your loved ones
Excellent construction and final product. Thanks for sharing - it works great!
I guess im randomly asking but does any of you know a trick to log back into an Instagram account??
I was stupid lost my password. I would appreciate any tricks you can offer me!
@Alan Raphael instablaster ;)
Hello. Very cool project. Congratulations. As bonus, you added cool link with music for the video. Thanks.
Very impressive build! Nice video!
Bravo çok güzel oldu
Easy to do if you have the right tools, unfortunately most of us don't have access to a table saw and belt sander. Good Work Anyhow.
You can use hand tools instead
Wow the slide is so smooth and clean.🙏🙏🙏
Excellent construction and final product...
verygood work ... verygood video ...
Very inspirational. Well done
Great project. Only question is where did you find that silvery 16mm pipe? Is it stainless? Aluminum? Chrome? Is it a plumbing pipe or something else? I was thinking of using copper pipe but that silvery pipe looks much better.
Простой, Лучший, с Новизной. Благодарность!
great and elegant job. thank you for sharing. Keep up creating.
Excellent work, just what I was looking for, I don't have access to your range of tools, but I'm sure I can adapt.
The best solution I ever seen
Gran trabajo.. felicitaciones!👏👏👏
Gracias por compartirlo..
Saludos🙋🇦🇷
Thank you for making this video. I was amazed and entertained at the same time. 👍👍👍
Excellent video and craftsmanship!
Really cool idea and execution!!
eexxcelentttt!!!!!!!!
Sei un genio e complimenti!!
Awesome DIY project
built something close to this. Same reverse switches but never could get the switches to work. If I use my hand to hit the switch it works because I am hitting the switch like on and off as in a tap. But the slider just touch the switch and alway just set there with the switch pushed in..... the slider will not go the other way until the switch is released.... How can i come this ?????
Your wiring is not correct for the switches.
Все так, как обычно. Только подшипник поворота щныряет от стенки к стенке, а это тупик всей задумки. А решение ещё проще...
Nice design, thanks.
pretty cool! I ll try this too!
Суппер видос! Суппер идея! Суппер реализация! Суппер мастерская!!!
Спасибо, Вадим!
Там три «п» должно быть
Excellent!
Je trouve la conception géniale, Bravo !!
Facile la prise en main de l'Arduino ?
Prends soin de toi et de toute ta petite famille.
This looks awesome! How long did you make the pipes?
140cm. Thanks
Very cool!
great job and very kill know how. deserves a like and sub. thank you for sharing your knowledge
Very cool ... good Job
brilliant!
Делаю себе подобный слайдер, поворотную часть использовал не профиль а алюминиевую трубу.Заметил , что эти движки "дергаются" при работе .Это даже заметно по картинке.Nemo 17 в этом плане лучше мощные и работаю стабильно.Хотел обойтись без ардуино использовав готовую плату с аллиэкспресс, но при работе с Nemo 17 нет возможности регулировки скорости.Наверное придётся все-таки мудрить на основе ардуинки
Да, немного дергается из-за малой мощности движка, но если пустить каретку по склону, то все гладко.
@@GRINwood дергается больше всего что там стоит редуктор.Интересно если подключить nemo 17 по этой схеме? Драйвер выдержит?
Just transferred some money - stay safe!
Amazing 😍😍😍
Very cool
Great. I need one.
Super
Good 👌
Wow thes is amazing genius But a little complicated thanks Is it possible to make a moving spider less complicated than it?☺️😊
Отлично!
Вы поняли для это нужно?
Nice, I have these components, I'll build something similar
I wish you good luck! Thanks for watching!
Классно!
Good Job! I have some questions ... which references and quantities from, Bearings, Timing Pulley, Furniture nuts on AliExpress ?
what about a circular motorised camera slider? good job
possible in the future, thanks
I have a question. the slide is running. How Do your camera keep your model in the center of the frame?
Sir I'm interested in your slider....
Don’t use those push stickers on the table saw invest in something like Microjig Griper
are you still using this? just curious. right now you can exchange the camera mount with A.i gimbal for auto tracking
LOve the video so i bought all the parts however when i goto your saved projects i don’t see the PDF in there for this project ? PLease HELP
Сегодня пробовал собрать электрическую схему.Ардуинка не такая как у вас.Скетч на новых версиях программы залить не получилось.Залил через 1.0.1 .Все спаял по схеме.Короче драйвер двигателя вообще не моргает.Иногда когда замкну контакты на ардуинке начинают светится пару светодиодов, но сам двигатель признаков жизни не подаёт.Может подскажешь в чем проблема?
Буду наверно заказывать ардуинку как у тебя.
😘❤
Buying a drone with a slider equivalent mode would seem less laborious and more flexible?
100% the wrong answer. I have 4 drones and never can get a simple but fast move like this. And what if you are shooting indoors or tight spots???? or in Washington DC.... or other NO FLY ZONE???? Parks.... Not debating with you at all, just letting you know some of the things I have already been through. I am hoping to build 3 of these..... What to buy some Drones???.....lol
bonjour merci pour votre travail, pouvez vous me donner la référence de la boite pvc pour mettre le projet .
Подскажи, такие короба ( для электроники) есть в продаже?
horizontal required, or will work at any angle, up to vertical?
No, maximum 20 degrees slope, it has low power motor
MacGyver Lives.
What kind of blade do you use for cutting the alminum
aluminum is soft. the same blade you cut wood with will cut aluminum and not damage the blade
Hi can I use a 12v 28BYJ-48 or do I have to change another component of the schematic, or the arduino code? Thank you!
In the end I was able to try it because I had the components at home, and it worked great for me with the 12v one, that is, I had to separate the power supply in two and I put a Step Up
Thanks for the video!!
Yes I am now on the power... don't know how much power or where to get the USB power supply????
Let me see if I've got this right... if I spend a couple hundred grand building and outfitting a professional quality woodworking shop and hire Norm Abram to teach me how to use all the equipment, I can then easily build this inexpensive DIY camera slider. Correct?
Did you say inexpensive????
They cheapest I've seen was about 300 and that was very short and no motor. Anything at this size plus a motor will run you 1 grand. So I am building me one ..... all part like under 150.... plus motor and a size you can't even get..... this video is amazing even after 50 watches.... lol
Peace and love always ✌️
Why do use so much shiplap?
how many price in india
I want order this modified auto slider ... how to contact you?
Parchesing...
Thank you for the project but i am having a problem uploading the Sketch to the NANO ? It When i validate the sketch it comes back with Void Setup Errors ? I checked each line and it is exactly like the Sketch you posted here .Can you help me out with this ? I appreciate your help. I have the mechanical portion already build and want to get it running and all I need is the Sketch to be loaded now . I did send you an e mail so if you could respond back with the correct Sketch i would appreciate it THANK YOU :) John
Did you get it to work?
Yes i did :) I
@@davidsalvador8591
Made of wood. Good for who don't have 3d printer.
Fichero Arduino dañado error
I WANT TO BUY SOMETHING LIKE THAT, PLEASE PRICE SHIPPING TO VIETNAM
You sale this product???
🇵🇱 👍
Arduino code ?
Please sell this slide to me I will buy
донька краще складала)
I believe there is a mistake in the code
This line:
myStepper.step (direction);
actually it should be:
myStepper.step (direction * stepsPerRevolution);
Or leaving it like this, you should change:
if (flag == LOW)
direction = 1;
if (flag == HIGH)
direction = -1;
in
if (flag == LOW)
direction = stepsPerRevolution;
if (flag == HIGH)
direction = -1 * stepsPerRevolution;