BOHO FURNITURE MAKEOVER// Raised Stencil+Paint Wash
Vložit
- čas přidán 22. 08. 2024
- For this project I dive into using an oscillator, adding legs, trying out a raised boho stencil design and create rope pulls!! Thank you so much for watching!
#flip #BOHO #bohemian #refurbish #paint #furniture #dresser #beforeandafter
Oscillating Tool:
www.homedepot....
This is amazing, hope to see more videos from you. Subscribed!
Aww thank you so much! I really appreciate that!! 😊💛
Do you have a link to the legs/feet you used? I haven’t seen one with the plate shaped in the triangle. I am new to all this so I don’t know how to do it really. I ordered some feet but had to send back cause the bolt wasn’t in the feet already? I just need it to be easier so I was hoping to be able to attach the metal plate and then just screw in the legs? Thank you so much I appreciate you showing us how to do this..
Of course! 😊 you can buy the corner plates at Home Depo and also a variety of leg choices are there as well which have the bolt in the legs ready to go:) I haven’t been able to find this corner plate at Lowe’s, but they also have many legs to choose from it Lowe’s as well.
www.homedepot.com/p/Waddell-Heavy-Duty-Top-Plate-2755/100390125
www.homedepot.com/p/Alexandria-Moulding-1-1-2-in-x-5-1-2-in-Hardwood-Wood-Round-Taper-Furniture-Leg-WT042-R0CB/303255892
@@therefurbishedlife How do i know the leg I get will fit in that plate? I know I sound stupid…I have replaced legs on my couch and by trial and error finally realized I had to look at the length of the bolt and not how big around the bolt is? Anyway, thank you so much for helping me. I thought the bolt plate came with the legs? So now I just need to find the leg that will fit in this plate and hope i can do it. I don’t have a lot of tools to do some of this stuff.. I’m older and single and sometimes I just have to try things out to see if they work, thus the reason I’ve sent back 2 sets of legs I ordered from Amazon.. lol.. story of my life.. anyway, thanks again..
And I haven’t checked Home Depot only Lowe’s so i will check there next. Thanks
@@pamlooman8045 Oh absolutely! I’ve learned most things by trial and error so far and I have a lot more learning to go :) As far as I know all of the legs that they supply in the Home Depo (should be in the same aisle that they sell the corner plate) should all fit the plate and sometimes you can check the packaging that the plates come in, for this corner plate I believe it is a 5/16-18 bolt size hole. So then if you look at the tag on the leg that you buy it may say also that it’s that size of bolt so it should work perfectly, but I do believe all of the legs that are available their will match the plate. But when you’re looking online or if you’re calling into a hardware store like Lowe’s, if you know the measurements that it says on your plate packaging, then you just need to check the leg bolt size matches 👍🏻
@@therefurbishedlife Thank you so much.. you are very helpful.. appreciate it much.