VFC HK PSG-1 GBB Unboxing & First Impressions
Vložit
- čas přidán 10. 03. 2021
- The Heckler & Koch PSG-1. An iconic Sniper Rifle replicated by VFC.
I unbox this beautiful rifle and give you and overview and my first impressions.
If you would like to support the channel monetarily, you can buy me a cup of coffee at Buy Me A Coffee.com. From as little as £1 you can help keep me caffeinated!
www.buymeacoffee.com/badabing
Why not follow me on my social media platforms:
/ badabingpictures
/ badabingpictures - Zábava
there it is! You celebrated unpacking. I notice that it is something very special for you too. I wish you a lot of fun with the PSG1.
It’s an honour to see you on my channel.
We have the same incredible taste in rifles
Thanks brother
@@BadaBingPictures 🔥👍
"Sorry but my need is greater!"
Said like a true HK fan. lol
Haha!
Yeah you got me. I did preface my remark with an apology...that’s more than most people get lol
Cheers bud.
Hope it's a good performer. Excited to see how their FAL ends up.
To bad it ain't. It can't propel heavy BBs very well and if you want to play with anything heavier than 0,3 you need to crank up the gas output... and the gas efficiency is already bad as it is. Great wallhanger but not very playable... It's a shame for that price.
@@Kraeh667 Bit disappointing, was thinking something like geoffs 0.32g would be a nice match. Well VFC make both GBR and AEG lines of HK416, so perhaps they will do similar with the battle rifles? King Arms seem in no hurry to re-release their offerings of the Fal.
@@derdersoft VFC AEG Internals are even worse... I wouldn't buy a VFC... It's just to much money for such bad internals.
@@Kraeh667 Fair point. Could replace the internals with standard V3 parts assuming they didn't opt for proprietary parts. The joys of airsoft.
@@derdersoft Or buy and E&C 416 and just switch 2-3 Parts instead of all externals ;)
I was waiting for this!
Thanks for the vid Bing, I enjoyed it as allways.
I Just knew you were going to get your hands in one of these 👍😁👍.
Awesome to see VFCs new lineup coming out!
Mostly excited for the FAL GBBR (FN LAR).
The right arm of the free world has gone far too long being heavily underappreciated in the airsoft world!
Cold War punchy battle rifles are my favourite, just something about the oldschool retro stamped steels, wooden furniture and early forms of polymers and most importantly, no fancy accessories covering their beautiful lines. Its just everything about the era in general. The days when governments would go wild experimenting with rifle platforms, compared to today where the only experimentation seems to be done on auxiliary components..
The 50s and 60s were very very intriguing times in terms of military technology and experimentation
are you excited for the full steel edition? freakin $1200 msrp
Awesome! This'll be so much fun! Gorgeous rifle in the real world so this'll be great. Thank you
Great review as usual Badabing! Love the white and red background looks really nice 👍
I knew it.
Oh wow brother. I'm so happy that you got this baby.
Ran around all of Shadow Moses base to find one of these to fight back Sniper Wolf, huh? I know I didn’t enjoy that backtrack lol
Can’t wait for the review!
i was just about to go to sleep, its 4am but now i HAVE to watch this
Hell yeah bro! I know you’ve wanted some of these for a while I’m glad you finally got one!
Thanks man. Yeah, it's a kick ass piece of kit.
Sure, that sounds awesome. Ammo prices are shocking right now, right?
@@BadaBingPictures oh Jesus. I’m paying 50 cents per round for 5.55 when it used to be 20-30 cents per round and over a dollar for .308, 9mm costs 70 cents per round and god help you if your shooting 50 bmg or .338 lapua magnum. 50 has nearly quadrupled in price nearing $20 a round and .338 has doubled in price at $6-8 per round, if you want green tip armor penetrating 5.56 your looking at one dollar and 30 cents per round if you want tungsten tip it’s about $3-6 a round and if you for some reason want black tip it’s about $100 a round
now we need an FAL and 7.62x51 galil, airsoft needs so much more battle rifles
Although technically isn't a BR, it'd be nice to see an SKS
Yeah, and the Sako RK-95 TP /RK-62 :D
@Antti Alitalo Yeah, I wasn't specific; I meant as a GBBR :)
OH YEAS!
@@BB2K-Airsoft As well as CETME Model L and the LR300 :D
I think it’s fine to do a comparison between the two! Inside the PSG-1 is basically their G3 internals with only aesthetic mods...the operation is still the same. 😊
(I really would like to see a comparison between the two)
it's absolutely the same internals. except of course the trigger is different. no steel parts and the trigger behavior is just as "spongy" as with the G3
@@BB2K-Airsoft, I love your channel!
Great overview and first impressions. I’m holding out for the LAR/FAL as you know but it’s great to see what VFC can produce.
Cheers bud.
It shouldn’t be too long until it’s reality. I can see you with one of those.
@@BadaBingPictures I’m debating whether to go with short shorts too! :)
I knew you'd give into the PSG1 GBBR hype train too. Can't wait for mine to arrive.
I never owned a sniper rifle before. I decided that it was time. Enjoy yours mate!
Yes! another video from my fav yt reviewer with the best taste! gotta go get a coffee now :D
Hey! Welcome back, mate. Good to see you
Enjoy that coffee!
Love your stuff. Any chance of the accuracy results 1.5 years on? I saw the grip fall apart but that should not affect the result. Many thanks in advance.
Making my final payment on one tomorrow so perfect timing cheers! So jealous of your scope! I'm going to have to build my own that works too, already built one for my 98Kar sniper making loads of brass parts etc.. as I dislike the scout scope option.
Oh boy you made my day 😳😳😳
Hey Bing, glad to see you got another toy...
Finally got my Colt M 4 straightened out, it shoots great now thanks for your help...
Hi bud.
It worked out for you then? Brilliant news!
Yep, another new blaster and another new review on the horizon.
@@BadaBingPictures hey sorry for the unrelated comment but your voice is amazing
Wow！Dream gun !
Man, that rised scope mount welded to this receiver is sort of an eyesore, can't lie, but a GBB PSG-1. That is sick.
Welcome to the 1970’s!
Wasn’t as sophisticated as the fancy pants stuff they have now. But it works, hah!
Oh it’s a beast of a GBBR
@@BadaBingPictures I guess I've never seen a PSG-1 without a scope before. hah.
woooooooooooow mate thats bloody lovley!!!!!!!!!!!!!!!!!! i will be getting 1 of these badboys!
OMG Love the monster unboxing!
Hey!
Thanks mate. It was tough to get it all in the frame, haha.
@@BadaBingPictures haha I mean its the big monster lol. Looking forward to the shooting test :D
We're a bit late to the party but what do we have to say? It's bing quality unboxing. We are curious how it will perform over time.
Seeing your unboxing we agree on a few points.
1. For the price it should've included a real wood furniture.
2. We're not surprised that the spring you've mentioned could resolve in some issues.
3. Breaking something within those 30 days warranty, well yeah it's VFC.
We hope companies like Zparts will make some aftermarket parts for this rifle. For example a good steel barrel with a powder coated finish like they do with all of their outer barrels.
Hi bro!
Oh yes. A nicer outer barrel would be a nice touch. Something overlooked completely, an extra long cleaning rod!!!! How are we supposed to clean the barrel when it’s twice as long as regular cleaning rods.
It never occurred to me until now.
I'm so glad you've uploaded this to youtube too! Facebook watch is horrible.
Thanks man. I thought it was a wise move as not everyone likes FB, and I try to upload smaller stuff in between the big reviews.
Oh and I read your reply to Chuck Norris’ comment last night. Made me laugh. Shame he deleted his contribution, I was looking forward to a discussion haha.
For all the people complaining about the price, they’ve clearly never seen the price of real steel PSG-1 parts. Used stocks go for more than the cost of this entire replica!
..how is that at all relevant? RS prices are due to rarity due to age
i almost bought one a couple years back for 17k
Difference is this lacks the quantity for the price and this one isn't shooting bullets.
laced Gaming true, but the point in hand is this is a low volume produced replica, produced using realistic materials. Whether it shoots real ammo or BBs the R&D and production costs will be high
@@Solidsnake0208 realistic material....the grip is plastic instead of wood, the internals aren't steel, that adds more cost on the buyers end if they actually want it too last even if they only shoot in once in awhile. People have already complained about the feeding and the bolt locking up...again this is close to a grand. Trade marks / limited edition doesn't excuse something for being designed poorly. We should have higher standards than this, so stuff like this doesn't happen. Also , I can afford this, money isn't the issue. It's the quality that's annoying. Seems like not enough people care about quality inside and out. Ps not calling anyone out for liking it, just not seeing the point of paying almost a grand for it.
It’s a beaut, best of luck with her! 🇮🇪
Thanks mate!
The rail riser is cool!
That is the most awesome rifle I ever saw in my whole airsoft career. Can you please do a performance video, maybe compare it to the MWS. PLEASE I NEED TO SEE THAT
It’s badass!
I think it would be unfair to compare it to the Marui M4 GBBR. They are both vastly different. And the TM would beat it easily, haha.
I'm seriously considering getting this rifle, it looks amazing and I rock flecktarn so it's a match in heaven. I'm looking at investing in a DMR loadout but I can't find any info online on the performance of this gun. What's the perfomance like?
It’s certainly a lovely rifle to behold. Awkward to use as it’s bulky on the stock and palm rest. So you’re not going to be very manoeuvrable.
Performance is solid. Cold weather isn’t the best, and she’s generally hungry on the gas too. The range on a .45g bb is 70+ metres. Accuracy isn’t bad, but can be improved if you wanted.
The major factor would be consistency. For long range work, you will definitely notice the variations in gas consistency from one half of the magazine to the other.
Another downside which is often overlooked is cleaning the inner barrel. It’s so long and there are virtually no airsoft cleaning rods that can punch all the way through.
Very nice review and an interest camera setup along with great editing, keep it up. Stay safe buddy.
Thanks mate. It’s not as polished as my usual kind of stuff but I got content out there- that’s the main thing.
I can’t fit this bloody rifle in the damn frame. It’s far too long. “That’s what she said” - Michael Scott.
@@BadaBingPictures haha, you did a good job and like you stated you got some good content out there, it's nice to see what the future holds with some more iconic types of guns.
I liked the stand, it gave the viewer a great idea of scale, you can quote me on that lol.
Mate, I’m super thrilled about my new NE Tripod!
I can open it right up so my 6’2/6’3 frame can casually stand up and shoot comfortably.
@@BadaBingPictures well if it works then that is awesome, it's also good If you plan to do the whole wall around tour of any new toys you get.
Howdy, could you do you which of all tested rifles so far is your favorite?
Thx
One that I specifically bought for a review? I would have to say the SG553. That was such a nice little rifle and it was really fun to use too.
Sadly I cannot keep all of them.
5:37 That weak charging action is likely because you have to wipe down your bolt and re-lube it. If it's like the G3, it ships wit this black guck all over it that slows the action. Also, on you're G3 you mentioned your selector being very stiff, it's because your housing (lower) is bad/bent. My G3 also shipped this way. Getting a real housing made properly will fix this, even slapping on your MP5 lower, you'll see the difference! It looks to be the same issue with this PSG-1.
On the grip... this big black...hm.... "Ring"...what is it exactly and for what is it there?
pretty rad
Will you be doing a full review of this gun?
I will be, yes.
I’m slowly working my way down a list of reviews and this one will be looked at towards the end of the year.
The US versions have the “Warning”declaration of independence lasered onto the receiver.
All the US VFC/EFirce/Umarex have this “warning not a toy” printed on or etched onto them.
Why i love RWA their versions do not have the US Warning memoirs all over them!
i got mine today, they definitely made improvements to the trigger pull and safety selector. The trigger pull is buttery smooth the whole pull and the selector doesnt grind.
but they forgot to grease the bolt carrier amd charging handle. i can feel it grinding against the reciever housing. Its not nearqly as crisp as your demonstration
I have the Asia version and the serial is hidden under the pistol grip and theres HK markings shallowly stamped on both sides, barely legible
Congrats on your purchase!
Quite the handful, isn’t she?
But very cool indeed.
@@BadaBingPictures i just found out the first run of these in Asia 2 years ago was a "deluxe" edition with an NPAS.
the 2nd run for Asia sales, which is the one i have, doesnt come with an npas, but the stamped steel housing is a higher grade than the first run and it's rated to endure 14kg power gas or HPA pressure. I read alot of consumers were experiencing misfeeds problems with the NPAS nozzle, theres a youtube video of a US consumer that spent $700 on overnight shipping to get one but there was a bb feeding issue with the npas nozzle.
I loaded up some power up gas at 14kg pressure and its shooting .32g bbs at 405 fps
Question, mine seem to have completely different looking trades and licensing.
Instead of the white filled serial number, mine says "PSG1 44- 1970" followed by the "KG" marking below it. Then it has "W-Germany" on the other side of the magwell. I also noticed when I examined it that under the barrel like you showed, it does have the 6mm markings, (it has nothing on the barrel) I wonder if mine is the "Asia Edition" which I find odd as I reside in North America. All in all I love this rifle, I am just currently waiting for the assessories for it. Can't wait for your full review of it.
Unfortunately I have the EU version. Umarex doesn’t like Europeans to experience joy by having a replica that looks too real.
Congrats on yours. I bet it looks superior to mine. (Totally not completely livid that yours is better than mine, I promised myself I wouldn’t cry!!)
@@BadaBingPictures For some reason I was under the impression I would of gotten the "non-licensed" version in the US due to Trade laws. Atleast you've got some HK engravings.
Superior? Nahh, its missing the scope and other assessories. If all yours looks way better than mine atm, especially with that kickass tripod.
Currently mine is equipped with a cheap aftermarket scope(I can’t even find a Marui one that is sold separately😢). Really wish someone would make a good replica like the Japanese did with the G28 scope.
I wouldn’t be surprised to see a clone correct optic hitting the market soon.
I picked up the TM in January before the PSG was released.
The reason the magazine is having issues inserting is most likely due to the bolt being closed. For the real thing and the we gbbr version, it’s almost impossible to seat the mag without locking the bolt open
It was tough getting the magazine into the magwell when it was empty but now its getting better after wearing it in a little.
That is a mighty fine bit of kit sir. Well done 😊👍🏻
Nice
Where did you get scope? Tokyo Marui or where? @BadaBingPictures
Eagle6 Airsoft.
@@BadaBingPictures Can you give me link?
i need one😍
They’ve come down in price a little since I got mine. Typical!!
Hi, is psg-1 pistol grip and stock compatible with WE G3?
I haven’t tried it yet. I don’t think it will have many compatible parts. I’ll see
@@BadaBingPictures kk, thx.
I see the coffee, I don’t see the toblerone.
Seriously tho this is a really nice gun with a nice video to go along with it
I just didn’t have the room for Toblerone.
Do you know how difficult it is to get a PSG-1 all in all a single frame? Its tough.
Hah. Thanks. A little rough around the edges but I got some content out there. 👍
As someone i think is knowledgeable about GBBR’s Is a 2”-8” group using .25 at 55’ a normal grouping? Shouldn’t it be better in a nice rifle? I’d get 2” groups then all the sudden a flyer around 8” from the same spot using a scope!
100 rounds i’m having 8” or so flyers every 4-6 rounds.
To me this seems off,can you please give me your opinion as to if this is probably signs of this being an inconsistent Fps causing them to stray? A clean barrel of course.
Also is YT age restricting your videos?
I’ll post the new Inokatsu Colt M4 GBBR and the new gen L86 GBBR when they get here! On the way!
Thanks!
Umm, I have no idea of your measurements as I use the metric system (like the rest of the world) Haha.
.25g’s are a bit light tho.
No, they aren’t age restricting my vids but you do have to select if they’re made for kids.
Nice to hear about your INO.
@@BadaBingPictures Yea they’re restricting them regardless of what i chose!
“ is inches! I’m getting 2”-8” inch groups at 55’ feet around 17 meters! Using .25g.
Thanks!
At 3:05 your saying that it will break because its VFC.. But is vfc well known to break? Or was it just a joke? Since am looking for a realistic and strongly made airsoft gbbr rifle! With preferably no plastic internals or parts on the outside ^^, Like am looking for a premium and solid rifle :)
It’s kind of a joke at my own expense because I have a habit of breaking VFC’s simply by using them.
HK417 Hop Up Chamber
HK417 Upper Receiver
HK416A5 Hop Up Chamber
HK416A5 Hop Up Adjuster
MP5A5 Cocking Support Tube
To name a few. Depends what kind of GBBR you want I guess. There’s lots of different ones to choose from.
@@BadaBingPictures haha yea, well! Am rewatching EVERY single video of your channel about gbbrs and then make my decision! I wanted to get a gbbr rifle 3 years ago but I kinda forgot about it! And back then I always wanted to get a vfc m4 if am not mistaken! But now looking back ar your MWS video's damn I kinda want one! But I just want a gbbr that is solidly build! All metal preferable internals aswell and my prefered model is like an m4 / ar15 / hk416 gun.. oh well, I just can't really decide on which one I should get!
You’d be making one of the best decisions by going with TM M4 GBBR’s. Sure it has some plastic internals but it’s proven. Set your hop up and go. They’re that easy.
How's it treating you these days? Did you end up breaking it within the first 30? Thank you for the thorough review!
The fake wood grip broke just from holding it.
Where the palm rest-thingy sits, the plastic is thin and the base fell off. It’s not a big deal…but it kind of is.
Other than that it’s been great. It’s range doesn’t have a limit, it seems! I have access to 70m and my .45g bbs ran out of space.
The review is coming next year. 👍
@@BadaBingPictures very nice-- can't wait for it 😎 I guess that's just the push one needs to go for the real walnut grips haha
Got it tooo, aaargh ! I can't watch your video and Bruce's one before I've shot miiineeee !!!!!!
We need to meet up and be a 3 Man Sniper Team with PSG-1’s. 🤙😆
Congratulations bro!
@@BadaBingPictures well, it is not mine, but that would be fun !
@@BadaBingPictures British, French and German sniper team! the furious three 😎👍
@@Antre_du_Dingo oh yes!
That sounds amazing! And we could have the V2 MP5’s as backup 😅
I was gonna ask what license do you need to obtain such a marksman’s rifle but then i realised its an airsoft
The German youtuber Reapersomething made a 2hr long incredibly detailed clip (there is good enough English subs) about this rifle. He brought up a few major problems with it. It would be REALLY interesting if you brought up the same factors with your rifle.
Cheers!
I haven’t seen his video on the PSG. I don’t tend to watch other people’s reviews on products which I own as I’d rather discover things on my own and not report using other people’s experiences...if you know what I mean.
I’ll see how I get on with the PSG. As I said in this vid, I’ll take my time and create a rounded off analysis in the way that I do. 😊👍
My works fine. Only heavy BB have big problems. The HopUp is good, but the long inner barrel can't blow heavy BBs through. You can raise the NPAS higher. The problem is a strong cooldown as a result. up to 0.28g the PSG1 is OK.
@@BadaBingPictures I hear you mate.
I was sitting with my finger on the buy trigger when I decided to watch that 2hr clip and now I'm all nervous about buying the rifle.
I really look forward to your review of it and thanks a lot for responding to the crowd sir, that is huge for a fan such as myself.
@@BB2K-Airsoft Thanks for the input man! As stated above, I'm nervous about buying it since it has some issues and quite the pricetag. I have a theory about switching to the tightest bore G3A3 inner barrel available (to maximize the use of gas actually pushing the BB and not going around it) and use ~200psi winter gas with ~.40 BB's and adjust the NPAS around those circumstances.
I run my KC02 with a couple of Rogue Worx upgrades under those circumstances and it's an absolute beast performace wise.
Do you have any immediate thoughts about that theory?
Why is everyone complaining about the weight for playing? It's a sniper rifle. One can argue that in airsoft u have to move more because of the short distance the bbs travel. But then I have to think about the poor guys back in ww2 who carried the Thompson that was basically the same weight. If it's too heavy grow bigger biceps. More important for me is: do the internals hold up? And is it capable of doing what it is supposed to do - being an airsoft sniper rifle?
It’s a big heavy rifle but the great thing is the weight is evenly distributed throughout, so it’s not too bad.
Couldn’t agree more, if it can deliver where it matters that’s all I care about. My very brief range tests with 0.40g & 0.45g bbs have been pleasing. I’ll see what it’s like engaging targets at those distances in good time.
@@BadaBingPictures I m looking forward to your full review.
Still waiting on your follow up review to tell us if it is worth it long term. Thanks.
I know mate.
I have a long list of GBB videos that are being pieced together.
Stretched the PSG’s legs and the range is incredible. So much so that it ran out of space.
I just saw Umarex show this off at IWA 2021 a few days ago.. You lucky duck..
I had to see what all the quack was about 😉😆
@@BadaBingPictures lol 😆 quack 🦆
honestly I want one and then make a GSG 9 outfit to go with it and play counter terrorist :) I also would not be baffled if the trigger is like that on the real steal thing cuz this rifle was made for taking one shot and one shot only on a hostage taker.
Just got a W.E pdw S with npas fitted, what would you say is the first part i should upgrade? Bare in mind what mad things ive gotten myself for the hobby lol, ive spent a good bit over a thousand so far getting myself bits and bobs like a brighter c tracer and rounds for my we m9a1 hexcut, a one tigris advanced version plate carrier with attachments and everything else like cases, bag, wall mounts, sights, head setup etc etc..
😌👌..
Now i wanna spend at most £200 on my rifle upgrades, as by itself with npas, my pdw were £440🤯 i came here instead of forums coz ive seen some peoples questions ive had myself get answered quickly, and bada brings some good knowledge on gas blowbacks, so if anybody knows in a good order what i should start upgrading on my gun, it would be much appreciated guys!
N when my jobs done ill upload what ive done to my walk in wardrobe, i'm proud so far.. hopefully see some of you when covids gone too, peace!
🔫😎🌍
Is it havier than an M14 EBR?
I don’t know. I’ve never owned an EBR
@@BadaBingPictures i Said it's About 5 kg. So I'm guessing is about the same. The m14 ebr gbbr is the heaviest gun I own. And i was looking for a g3 or the psg-1. But I don't think I'll find de psg-1 here any time soon. Great video man. Love your content .
MGS flashbacks!
You almost shock me when you tell it is a S&B Scope
You don’t buy a psg1 to run around with? It’s a marksman rifle/ sniper rifle, G3’s are battle rifles.
Where could I buy the scope？😂
You think that thing is awkward to manipulate, you should try the WA2000 by Ares. Solid wood and metal.
Ah yes, the WA2000. Like a handheld family car sized ….. sniper rifle. Certainly a chonky beast.
Need a GBB version!
@@BadaBingPictures supposedly the Ares CO2 bolt conversion kit can fit in the WA, but I'm not chancing it trying to be the first to do it when the rifle cost me over $700 to get it home. Thanks Covid. Btw, bought a Ghk M4 V2 recently, and an Aug, based on your recommendation.
@@BadaBingPictures also, sorry about your psg grip. Want the gun myself, but I've seen too much wrong with it by so many people to get it.
Ouch. That’s a hefty price tag.
That’s cool man. How’s your GHK’s? They haven’t been doing so well with QC over the past few years. Any issues?
@@BadaBingPictures I will say the WA is fun to shoot, even for a springer. I haven't gotten the GHK yet. Comes in Wednesday. I heard the same, but from the folks on r/GasBlowBack the GHK M4 is still up there. May be the end of my buying adventures for the year, though. Unless you come out with another video of some spectacular gbb that dethrones the MWS.
While the HK PSG-1 is an iconic rifle, it is certainly something I wouldn't pick up. This is for a few different reasons but the main one is that it simply doesn't fit with my play style and load outs.
As for drawing comparisons between the WE and VFC... I'd argue that it's a reasonably fair comparison as at their heart they're both based on the same/similar systems. Admittedly the PSG-1 does have some modifications which were made in order to fit operational requirements but these wouldn't really have any notable impact on the airsoft version.
For the price, it looks rather disappointing to be honest. For around the £1000 mark I'd have expected a wooden handle and for other features to be correct. Quality wise it doesn't really look as though it outshines the WE G3 (Ok the G3 is a different rifle, I get that).
I'll keep my eyes open and wallet at the ready for when the GHK AKMS I have my eye on becomes available again although the price increases due to Brexit really leave me questioning the pursuit of new airsoft kit.
The fact that it doesn’t have a all steel fcg is really disappointing for the price
If you are ever in Arkansas hit me up. I have a G3 in .308 and a bunch of AR and mcx platform rifles and some explosives
Good first impressions. I personally don't like it, too much $ for the large base, wobble in the handgaurd, to heavy, and too bulky, fake wood, g5 type of charging handle. Ohh no. I think they might have rushed production 415 fps is way too low for this type of platform my cyma m700a stock is about 410-420 my included upgrade is about 460-490. No bipod included. And parts for vfc are difficult to find also mags are way too much. There is to many bads in exchange for the one good thing that it looks amazing. Anyway thanks for your videos🤙🤙 I personally know how hard it is to do these videos as I don't have one up and its been weeks of attempts😤😤
So fucking good. My dream gun. But so fucking expensive as well.
It’s a beast.
It’s actually a little cheaper now than when I first bought it. Not by much but still…
Anyone got audio and video out of sync?
Can Airsofters plz put sir soft in there titles 😊 i must say untill i saw the mag i thought wow
Bit of an odd request, but sure. Title is now amended. 👍
I sooooo want one, but I just can't justify paying that much for a replica
Also, if you have a We G3 please do a comperison video
Looking forward to your next wallet drainer
You could buy their standard G3A3. I hear great things about it.
Yes I have the WE G3. Now the question is do I compare it to the PSG? Even though externally it’s different. Or do I save up for a proper G3 to make the comparison even?
@@BadaBingPictures A G3 vs G3 would be ideal. But I do think that a compereson of G3 vs PSG1 would be interesting; especially a field report (which gun is better in different game play). Just thinking out loud here
;)
ehehe i can already see a 2 year performance video coming along if it doesn't die within a week of usage
If I decide to keep it that long...
Be cool if I can afford to keep it but there will always be new shiny things on the horizon.
Your serial number is great, but the fact that in the EU we're paying a grand for a barely licensed PSG is pretty sad :(. I still really want one and will still pick one up, but that fact + the worryingly floppy charging handle is definitely raining on the parade of excitement.
VFC focuses too much on quantity and not enough on quality, both in build and performance; I hope this changes with the FAL, but it'll likely be a $700 brick!
Now we wait for FAL. I hope it would be cheaper than PSG...
Early reports say they are going to be releasing a standard version with an alloy receiver and a deluxe model with the steel receiver. So if you don’t fancy paying too much money you can buy the standard model.
@@BadaBingPictures do you know anything about the estimated price?
@@ivanyonshevsky1408 No, sorry. RRP has yet to be released.
Tokyo marui need to release more guns ):
You got a PSG-1? You can use that against Sniper Wolf. Hurry up and save Meryl!
I’m assuming you’re referencing MGS? I’m afraid to say I never played that game. I had a Nintendo 64 in those days.
well I actually still have the 64. Could never part with that console.
Awesome video for an awesome gun pal. Well done.
Being an owner of the VFC G3 GBB, I know that the mags are a bitch to get in when they're new.
They will wear in and fit easily soon, especialy so combined with your muscle memory.
Thanks buddy.
It’s getting better the more I use it, so it’s cool.
Sexy! Have you got any plans on getting yourself a G28? Cheers
I am not planning on buying a G28. I don’t like the colour. The horrors of their 417 still exist and continue to give me nightmares.
Ohhh the shade being thrown haha of only it was ghk ...
Trust me, you don't want GHK to make this rifle. Just look at their quality control recently, it's horrible.
@@machonacho95 never had issues with ghk been running them for about 3 years now. True i haven’t tried the recent mk18 but the g5 , 553 and mod2 m4 are all fantastic.
@@machonacho95 I've been looking into GHKs recently, more specifically their AK models, and I hear nothing but praise quality-wise. Is now a bad time to buy?
It’s true. GHK have gone downhill in recent years.
And VFC are starting to get a terrible reputation for making good guns now....what is the world coming to?!
**wishes to himself ”PSG-1 please be good, please be good”**
@@BadaBingPictures if its good i may be trading my m4 for a vfc 416 its on my list thought going aeg may be better though was hopeful ghk may have done a 416 so I don’t need to but mags haha
VFC shouldn’t be asking what they are for it though
I couldn’t agree more
first ever gun?
Think this guy is trying to act like Luke just a little
This guy doesn’t know Luke.
How the hell did you get one? Did you sell your kidney??
I want one so bad! It hurts 😢 but got other stuff I need to pay off first. Damnit life why can't I be rich!
I sold many many things that I no longer needed. Over the years I accumulated so much stuff and over the past 4 months I’ve had a clear out on eBay.
Things like my Marui M4 Gas Mags. I don’t need 8 of them so I sold 4 and earned a nice bit of change. All adds up!
@@BadaBingPictures I need to do a similar sell
Off for the LAR/FAL
*aggressive gorilla noises
Man, I have a feeling this rifle is a scam. A 800 $ G3 with plastic pistol grip and wobly souless parts like charging handle,foregrip,stock adjustments... I kinda want the gun myself, but man... I wonder if it at least shoots alright.
Yes my comments exactly idk about this thing. I think i would be better off with a we tech g3 maybe a few upgrades and I will still save a few hundred bucks 🤔🤔
And a none steel FCG, it’s real shame
@@opairsoft8100 Indeed ! The Forged Series M4 that I have for 750 bucks has complete steel internals and stuff, not to mention the forged body.
He doesn't live in the USA, 1000 pounds not a $1000...
@@str8creepin yeah whatever. I mean, the gun itself still seems like a scam
actually it's quadruple 0 7