Wipers will not shut off - Ford Fusion
Vložit
- čas přidán 5. 02. 2020
- This 2010 Ford fusion came in the shop with the wipers staying on even with the key removed from the ignition. the only way the owner could get them to stop was to disconect the battery. Follow along as I take you through the steps i used to debunk this ghost!! Hope you enjoy!
If you enjoyed this video, please consider leaving a Tip. follow the link bellow
paypal.me/robinsonsauto?local...
Wanna Help support future videos? get your name in the credits and more to come in the future.. follow the link bellow
/ robinsonsauto
Our Amazon Store
www.amazon.com/shop/robinsons... - Auta a dopravní prostředky
Very good video. Most people would have assumed it was the multi function switch and replaced it. It shows the importance of proper diagnostics and study of the wiring diagram.
Oh my gosh brother it's good to see you again I am still getting ready for ASE I feel I am ready for most areas I hope there are more diagnostic case studies to come I will pay for them if I have to thank you ⭐
Northern patriot907 it’s great hearing from you too!! That’s great man!!! Wishing you all the best. You got this!!! I’m here, if I can help in anyway I will. thank you very much for the support 😊🤝 im going to give it my best shot
@@robinsonsauto yes sir I am Pumped for more drivability diagnosis and module diagnostics my weaker areas are O2 diagnostics specifically the WIDE BAND diagnostics those are still hard to understand on how to properly diag a wide band problem becuase of the micro currents your supposed to be able to interpret I hope your shop is busy but you still have time for us students of the trade 😄💯
Awesome video, hope to see more
What part did you use to replace the module? I need a Ford Fusion 2012 and they’re telling me the part is discontinued.
Did anyone find the part??
Great fix my wife thought i was asleep with the wiper noise thought i was snooring lol but who you gonna call will busters
Very knowledgeable mechanic thank you. I'm going through something similar my washer fluid sprays out the nozzles on its own once I start driving my 2011 Ford Fusion. I've taken the reservoir pump out and ordered a new one hoping that it'll take care of the problem.I went through two jugs of washer fluid in two days that sprayed out while I was driving, talking about a ghost👻 car..
Facing EXACT issue what did you do to fix???
What is that control module called??
Great video
Where did you get the part seems to be out of stock everywhere
Right away, from the schematic it looked like the wiper low was getting power from somewhere, most likely from inside the module. My guess was a stray low resistance circuit existed from the battery circuit that when module is not powered up, there arent the other pathways for the potential to bleed off into, so the resistance can be overcome by the full battery power. I still would have done the tests on the two batt pwr wired as you did, just to be sure.
Grasias por el diagnostico
You know it's a well maintained car when the first messages on the display are oil change required and tpms warnings. You can bet if the wipers only ran with the key on, they'd still be running today. The car isn't haunted, it's neglected and just wants a little attention from someone that cares. You should have given us some bonus footage of the dipstick, tire pressures and tread condition.
Great video, Mine has a similar problem stopping in the middle of the windshield and sometimes keeps going
Did you find the problem with your wipers? My daughter's Fusion is also stopping in the middle of the windshield occasionally.
Hi it took me trying them on and off for days but they returned to normal@@elebeu
What is the part number for this module?
This still did not fix my issue. My washer pumps goes also.
You moved the lift?
R. E. Hill same location but we portioned off the old paint booth and built a stairway for parts storage upstairs
I would actually like to move the lift to the center And Put an alignment rack in its place
Honda ridgeline
at least put towels under the wiper blades so they are not barking acros the windshield.
Knock the electric module first.
Yup absolutely. most times just getting the module down will temporarily fix the problem making it hard to demonstrate or capture the root cause, if i wasn't trying to capture the issue for the video i most certainly would have ;) thanks for sharing
@@robinsonsauto lol. I say this because my family used to own a rebadge Opel built by GM Buick in China around 2000s. One time the window fluid motor was not working and our mechanic just knock it a few times then it work again. He told us, if it's working then live with it.
GM cars was really solid build at that time. My mother never take the car to service until something went wrong. One time, The car was run with only 2 cylinders for a few month because rats destroy the spark coils. The car still made through more than 10k miles for more than 10 years. It seems like GM quality control is really good in China. I think thats why GM sell much better in China than in US.
I own a 2007 S60 in US now.
Lynn Misaki cool story!! Thanks for sharing . Good old days right lol sometimes all we need is a bigger hammer