This is the best video that I have seen for working on this washer. This is the second time that I have had to replace the lid switch and this video was the most helpful of any video that I have seen because he talks while he works and stays on track with the work. It made it much easier to follow him while running back and forth to the laundry room to do the work. His tip to drain the standing water out of the washer by temporarily plugging in the new switch was tremendous. I'm a subscriber now. Why pay a repairman $200 to come to your house for 30 minutes of work when you have access to this quality of instruction?
This video was very helpful. After purchasing the lid switch from Amazon I was able to apply the part in less than 15 minutes by following this video step by step.
This video saved my wallet. I had my garbage disposal and washing machine die out on me last week. I hired a repair man for the garbage disposal and it cost me $700 dollars. I felt like I was ripped off and decided to fix the washing machine myself, followed your video and got it done for $10. Thanks homie. Liked and subscribed.
Excellent stuff. Second time this switch has needed to be replaced. First time we paid $400 to have a repair guy come do it. It happened again 5 years later and thought I'd search for it. Your video popped up and I remembered "that was the same as last time"! $11 on Amazon, and part arrives 2 days later and am good to go saving probably $500+ this time.
Let me add another thanks here. I am HORRIBLE at fixing things but my daughter is the engineer. Between the two of us, we replaced the switch and put it back together. The toughest part was putting the housing back over the tub but once we got it all lined up, everything snapped back into place. Thanks again!
You can bypass the switch. It's what I've done on other washers. As long as you don't have small children around who might stick their hand in there, it's not a big deal. We have been using one like this for many years.
I could use your help. I have a Kenmore Model 110.24922200 90 Series washer. After completing one load of wash I started a second. The tub filled with water, agitated then stopped. No matter what setting I put it in nothing happens other then the water will fill. No humming, nothing. I did check the lid switch, it is good, I even jumped it to make sure. I also replaced the timer. I tried tracing the wires but got lost.
This is the best video that I have seen for working on this washer. This is the second time that I have had to replace the lid switch and this video was the most helpful of any video that I have seen because he talks while he works and stays on track with the work. It made it much easier to follow him while running back and forth to the laundry room to do the work. His tip to drain the standing water out of the washer by temporarily plugging in the new switch was tremendous. I'm a subscriber now. Why pay a repairman $200 to come to your house for 30 minutes of work when you have access to this quality of instruction?
I’m glad that you found the video helpful. Thanks for subscribing this really helps my Chanel grow and helps me make more videos
😊$😊,
Glad it help you fix your washer and most important save you $$$$$
I fixed my lid switch problem using 2 strong rubber bands. No lie.. a year later, still working.
This video was very helpful. After purchasing the lid switch from Amazon I was able to apply the part in less than 15 minutes by following this video step by step.
THANK YOU!!
Super excellent, clear and easy to understand, step - by - step repair instruction!
Good job! Thank you!
Amazing vid. Helped me all these years later. Thanks!
This video saved my wallet. I had my garbage disposal and washing machine die out on me last week. I hired a repair man for the garbage disposal and it cost me $700 dollars. I felt like I was ripped off and decided to fix the washing machine myself, followed your video and got it done for $10. Thanks homie. Liked and subscribed.
Thanks glad it helped
This video was perfect. Very clear and concise with showing me how to repair my washer. Thank you sir!
Excellent stuff. Second time this switch has needed to be replaced. First time we paid $400 to have a repair guy come do it. It happened again 5 years later and thought I'd search for it. Your video popped up and I remembered "that was the same as last time"! $11 on Amazon, and part arrives 2 days later and am good to go saving probably $500+ this time.
Glad it helped. And thanks for the comment please don’t forget to like subscribe and share this video it helps a lot
OMG.... you turned me into a master washer fixer, lol. This video was soooo helpful and easy to follow. Thank you! 😊
Glad the video helps don’t forget to like and subscribe
Very clear. Kept the camera catching even the tough angles so we could see exactly what you were doing. Good job.
Thanks glad it helped.
Let me add another thanks here. I am HORRIBLE at fixing things but my daughter is the engineer. Between the two of us, we replaced the switch and put it back together. The toughest part was putting the housing back over the tub but once we got it all lined up, everything snapped back into place. Thanks again!
Glad it helped thanks for watching. Don’t forget to like and subscribe if you haven’t already.
Have replaced that switch 3 times. Never saw the clip showing how to drain the machine. Always bailed by hand. Thanks for the tip.
Glad it helps makes a huge difference to do it that way and no risk of smelly water all over the floor
You can bypass the switch. It's what I've done on other washers. As long as you don't have small children around who might stick their hand in there, it's not a big deal. We have been using one like this for many years.
You have a new follower. Great video. This was so helpful in fixing my own washer
Thank you very much. You helped me fix my washer with ease....much appreciated.!!
Glad it helped please share it and subscribe 😊
Thank you! This saved me so much money :) Bought the piece off amazon for $10
Great video! LOVE HOW EVERY STEP WAS SHOWN. Thank You.
Awesome video, great job all around!
Very detail video.... You should make more like this.
Thank you, I will
Excellent video. We were able to make repair in about 30 minutes. Thank you.
Many thanks. Excellent video. So many useful details make this job easy doable.
Thank you so much, this was a lifesaver and super easy to follow.
Glad it helped. Don’t forget to like,share and subscribe if you haven’t it helps a lot
Thank you very much for this video. Save me a bunch of money doing it myself.
Incredible! I got mine to work. Thank you!!
Glad it helped. Don’t forget to like share and subscribe if you can.
Thank you for your video. Mine had the same exact problem.
This is amazing. Thank you so much ! Mine is now fixed ᵕ̈
A really excellent video. Thank you
Saved me! Thank you for the awesome tutorial
Glad it helped
Great video! Thanks
Thank you nice and simple
Thanks Eh! Nailed it!
Thank you for this
I could use your help. I have a Kenmore Model 110.24922200 90 Series washer. After completing one load of wash I started a second. The tub filled with water, agitated then stopped. No matter what setting I put it in nothing happens other then the water will fill. No humming, nothing. I did check the lid switch, it is good, I even jumped it to make sure. I also replaced the timer. I tried tracing the wires but got lost.
Most likely a bad motor if you by passed the lid switch and replaced the timer
You the man
Thanks
Many thanks buddy
Glad you like the video. And hope it saved you some money
Thanks!
Thanks for the super thanks.
Glad the videos help.
If you hold the switch down it should work correct?
Does anyone know how to find the part #? All I get is 110 and not 111 and Idk if its just the same?
Do you need the lid switch if so the part number is
3949238.
What us the part number or name of that part. I think my machine has this problem
link to the part i need to buy please
Seriously people.. just get a couple of strong rubber bands and wrap them around the lid switch. Done.
In that case use zíper ties. That works better than rubber bands. I’ve used them in the past
What’s the green cable you used to drain the water out?
It’s a jumper cable.
Is this the same fix for the washer even if it’s spinning but not draining because mine just spins but is not draining
Most likely a bad water pump
Hello. If I do hear the click what else could it be?
Clogged water pump. Bad motor or timer
@@appliancerepair420 thankyou
इस मशीन पूरा डयोग्रराम भेज दे तो बडी मेहरबानी होगी
या फिर वायेरिगँ का वीडियो बना दे
Parts for kenmore washing machine
I need contact you because my fridge not working please tell me
What city are you in.
Columbus Ohio
Thank you so much I'm in Columbus Ohio
Shoot me an email if you have any other questions
ocappliancerepairdiy@gmail.com
What’s going on with your refrigerator