Complete Overview of My Restored Bass Tracker!
Vložit
- čas přidán 5. 09. 2024
- Follow the facebook and instagram pages to stay up to date!
Links to the products I used:
Vinyl Flooring:
www.defender.c...
Engine Hour Meter: www.amazon.com...
Lower Unit Plug:
www.amazon.com...
Carburetor Rebuild Kits:
www.amazon.com...
Water Pump:
www.amazon.com...
Inline Fuel Filter:
www.amazon.com...
Stainless Transducer Mounts:
www.amazon.com...
New Prop:
www.amazon.com...
Spark Plugs:
www.amazon.com...
Radio Antenna:
www.amazon.com...
20AMP Inline Breaker:
www.amazon.com...
60AMP Inline Breaker:
www.amazon.com...
Heat Shrink Tubing:
www.amazon.com...
Double Switch Connectors:
www.amazon.com...
Stainless Magnet:
www.amazon.com...
Clipboard Clips:
www.amazon.com...
3-Position Blue LED Switches:
www.amazon.com...
LED Deck Lights:
www.amazon.com...
Helix 7 Sun Covers:
www.amazon.com...
Stainless Angle Brackets:
www.amazon.com...
Switch Panel:
www.amazon.com...
Radio:
www.amazon.com...
Cup Holders:
www.amazon.com...
Electrical Connectors:
www.amazon.com...
Stainless Screws:
www.amazon.com...
Tilt / Trim Switch:
www.amazon.com...
Aluminum Piano Hinges:
www.amazon.com...
Small Flooring Roller:
www.amazon.com...
Large Flooring Roller:
www.amazon.com...
Flooring Glue (Did Not Work Great)
www.amazon.com...
Helix 7 RAM Mount:
www.amazon.com...
Stainless P-Clamps:
www.amazon.com...
50AMP Trolling Motor Plug:
www.amazon.com...
Remote Flush Mount Plug In:
www.amazon.com...
2 Pin Sockets (Docking Lights)
www.amazon.com...
Latches (Non-Locking):
www.amazon.com...
Latches (Locking):
www.amazon.com...
Navigation Light & Socket:
www.amazon.com...
Anchor Light & Socket:
www.amazon.com...
Floor Drain:
www.amazon.com...
Stainless Staples:
www.amazon.com...
Docking Lights:
www.amazon.com...
I've spent the past three days watching every one of your tracker restoration videos. Man I was so utterly impressed with your work. I was so impressed that I went out and found the EXACT same boat, a bit newer but the same and ill be doing the same thing to it. I would have never attempted something like this without your trailblazing here.
I am really impressed with the work you've done on this boat! I have an '89 Pro 17, pretty much the same hull and configuration as yours, and I've gotten a lot of ideas from what you've done here. You already answered several questions I had, and given me new ideas for them. Excellent video!
Been following for years. More boat update videos! Currently trying to finish my 1990 Bass Tracker. These videos have helped me so much. Keep killing it.
More coming this summer! Had to take a break to build a house
You have done a great job on this restoration. Fantastic work on the design changes and additions. Looking forward to more!
Thank you so much for these videos. I am about to do exactly what you did to your boat on my 1991 Alumaweld 17ft bass boat. Everything you did I am doing so its nice to be able to have a game plan and items purchased prior. I work overseas and only have 3 weeks at a time at home which makes it hard to do anything lol. Hopefully I can knock it out in a week or two so I can fish a week before I'm back in the desert lol.
Can't tell you how much I enjoyed watching this whole series. I bought an '89 Bass Tracker Pro Guide 16 recently and you've inspired me to make some upgrades and updates. Nice work brother!
We have a tracker tournament Pro 18 and this has been an eye popping transformation. Looking forward to some of the same customization on ours.
I just recently bought the same boat and I thought mine was clean! Might take some of these ideas!
WOW!! This boat turned out amazing! Thanks for the ideas. I'm looking at a V-hull Bass Tracker 17 from 1992 and I think a lot of these mods will work great on it.
Awesome build man...for your rod bungees, flip em around so the clip is towards the outside...that's what I did and it works well
Thanks for all the bass tracker videos. I just bought one and they're going to be a big help to me. Looks amazing!
Same
Well what a 4hrs of watching these videos tonight. I must say you did awesome but I’m sure you knew that. I like how you second guess yourself as well. Can’t wait to start redoing mine. Find your videos by seeing how to remove the seats. Well little over 4hrs I’ve watched them all. Thanks for the series.
Good looking boat done right i been working on my 1994 alumaweld exspress bass boat all aluminum 0 wood in it carpet in mine purdy good had rewire lights and get new nav lights put all new dark blue gray seats in it got a fully loaded helix 5 on the dash and got a plain helix 5 on front and a trac 25 anchor winch in back
Wow......one nice job! I have the same boat but as yours, but this is off the chart.
One of the best looking trackers iv seen when i was looking for a boat every one i looked at was over priced need a total redue i got lucky found a 94 xpress 17ft with a good 85hp yamaha for 3k with new min kota edge 45 lbs thrust and helix 5
The Bass Tracker looks amazing Man! I’ve finally got mine running and I’m looking forward to winter to dig into it. You have given me so many ideas to both improve and preserve this baby. Seriously it looks very nice, great job.
That is a vantastic job most definitely if you did it all yourself you should be very proud you set the boat up very nicely
Thank you
Looks great have watched all the video on the build. Did a great job.
Thank you! Best no nonsense, straight to the point video I've ever seen!
You have to start your own business from this!👌👌👌
Amazing job!! That is absolutely beautiful and you are insanely talented. I would take that boat over most newer boats. Great job!!
outstanding. most value on the water!
One of the best boat restore I have seen. How many hours did this restore take and what was the total build price, I am going to restore my John boat and my 79 cajun bass boat, this info will give me a ideal of what my build will cost and a time fram. Awesome job.
Not sure total cost maybe $1000 or so it took me about a month a few hours here and there
You are very talented, I wish I had your skills.
Dude ,you might and might not know it, start small and do it
Great job. I just purchased a 94 Alumacraft classic deluxe. Very cool boat and plan to do mine. You have me some great ideas. Thank you. I subscribed. Have a safe hunting season.
Nice build dude would love to see a year later review on it and see what you would change or do differently. I have a 91 bass tracker that I’m working on and your videos have been a great help.
I have the review video complete just need to post it! But so far i havent found anything i would change
@@PUTEMDOWNProductions great to hear! Hope to see that video soon.
Fantastic Job Sir. I have a boat just like yours but with a different floor plan. But you gave me some great ideas unless you would like to do another one. LOL 👍
Great series man! Deserves way more views. I have a 1990 Bass Tracker that I’m restoring!
great project, hope you put some sort of plastic between where you put stainless on the aluminum so you dont get dissimilar metal corrosion
i just got my 1993 bass tracker tx 17 and cant wait to starting making it my own. yours is amazing! starting to watch all your videos for ideas
How long is it with the trailer?
24’ ish
@@PUTEMDOWNProductions is that including the motor?
We’ll done, thanks for sharing!
Beatiful job!!!!
Thanks for the video, you have done one find job. I have a 2009 Bass Tracker Pro Crappie 175 , & I have been looking to do a upgrade on my boat. I really like the way you did yours. I going to my something like the way you done your.
Look in trailer supplies you can get a recessed loop for your rod holders on deck
Dude! Your boat is solid! 👍🏻👍🏻👍🏻 go fishing!!!!!
Awesome video! I am getting ready to overhaul my 80's bass tracker and found your video. You have a new subscriber, cheers!
Thanks for making this video and taking time to make links. You did a fantastic job!
You put effort into it for shure thats what i done to mine even new set of trailer steps and put fully loaded helix 7 at the helm
Great job!
Real nice don't have a bass tracker but I have a sea nymph bass attacker
For rod straps I honestly prefer the Velcro style or the ones like what come on the Vexus boats
Great looking boat.
Very nice build. Some really good ideas
I’m Enjoying your videos man…. I’m looking to build a rod locker on my 2022 Bass Tracker Classic XL
I just re did my 94 xpress built a all alumin front deck extension and all new carpet i found 2 hatchs similer to ones in my boat there all water proof dry stprage got 4 hatchs in front now
This is amazing! I’ve been following your videos and watched all your videos on the build. You make it all look so easy lol. I’ve got a 1991 tracker tournament-v with a 2003 60HP Merc on the back. I’ve basically been trying to do some of the mods you’ve made on your boat to mine but I can’t keep up lol.
Amazing work, especially the work on the motor and the added decking, floor updates and rod lockers!!
Keep up the great content. Would like to see some videos of it in the water or catching some pigs !
Nice job on the boat
been watching your videos and it inspired me to rebuild me 88 pro 17 thanks for the awesome videos keep up the great work.
Damn man, awesome rebuild! Very creative
Came out legit man! I gotta go back to your first video ha good job though!
Very nice job. Planning on using your videos as guide on doing my tracker.
Will you do a year update on all of the things that you have done to your boat and tell us what you are still happy with and what may have failed if anything in the past year?!
Yep plan to in the next couple weeks!
Great job. I have a 93 and am working on it now. Couple of quick questions. Where did you get the new cable for the starter? The 20 amp breaker-was it going to your fuse panel? I believe the 60 was going to the trolling motor. Love the tweaks and will post some videos as we get it a little closer to being ready. Need to do a VRO delete next, but not a huge priority since most lakes around here are trolling motor only...
I got the cables off Ebay, and yes the 20amp breaker goes to fuse panel. I use it as protection as well as a battery disconnect.
www.ebay.com/i/301870734220?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=301870734220&targetid=915852593453&device=m&mktype=pla&googleloc=9017979&poi=&campaignid=10459841985&mkgroupid=104612010420&rlsatarget=aud-622524042958:pla-915852593453&abcId=2146002&merchantid=101685145&gclid=CjwKCAjwmMX4BRAAEiwA-zM4JneXamuELBalEReqOgvbM5YJ0WrgDkLjVT4_ipTRY-mzaZkhyuUtTxoCWBEQAvD_BwE
Cool video brother! I just bought an 04 g3 175 silver eagle that I'm going to restore. Tips appreciated!
Nice job on the restore! It looks awesome! 👍
Did you do video on the transducer mount and wiring.?
Great build!
Yes both the front and rear
I’m about to buy a Bass Tracker myself
Love it!!!! I'm slowly working on mine.... Awesome Finish ...
Im in the middle of doing a restoration of my own on an aluminum deck boat. 3 years later, how are rhings holding up and do you have anything you night change as far as materials or process? I really enjoyed the videos!
Great job
Nice!
Nice man! 👍
This is spectacular....well done! I love the vinyl flooring. I've never been a fan of the carpet (especially here in FL) it always wears out and looks awful, and it always get's mildew and stinks. I think I could hang with all of it other than the engine rebuild. That would intimidate me. Were you able to do the engine rebuild while it was on the transom, or did you have to pull the powerhead to have it machined??? Great job brother, that's incredibly inspiring.
Had to pull the powerhead off and lower unit off to rebuild
Very nice. Great job.
Anything you would change today? I have the same exact boat that I am finishing the motor work on now and then going into cosmetics and upgrades. You happy with the docking lights? Worth it or not? Any recommendations?
Man I’ll tell you what if that’s not the best work I’ve ever seen, I wish to god you wasn’t so far away from Ga, I’ve gotta ‘88 that needs the interior done exactly the way yours is, you thought it through and man what a great job!
TRACKER NEEDS TO PAY YOU TO BLUEPRINT THE LAY OUT FOR THEM, NO JOKE..!
Yours is the most tournament ready one I’ve ever seen.., I like Bass Trackers myself, and hey, that sucker will make it in water that a $60k Ranger won’t go..
You’re picky like me, I mean right down to all of it, like you should be..!
That’s one thing I’ve never had much time experience with is wood work and such..
I’d rather have yours than any new one I’ve seen..
DO ME A FAVOR PLEASE.., IF.....just IF YOU EVER DECIDE TO SELL IT LET ME HAVE THE FIRST CHANCE TO GET IT PLEASE..
My son is 11 now and I took him bank fishing, the. We both got the fever and I wound up getting a ‘88 Pro 170.., pretty descent shape and best of all it runs just like a new one..
Two thumbs up budro..
👍🏼👍🏼
P.S.
PIN THIS COMMENT TO THE TOP OF YOUR LIST..
Thanks man
I realy like my alumawed 17ft i got about 3 weeks ago has a yamaha 85hp on it this winter going to put new fuse box in like yours
Nice work.
Outstanding
Awesome rebuild! I just missed out on the same boat/same year. Probably for the better cause I think the motor was unsalvageable. Looking for another, and with the help of your videos I'll do the rebuild. Congrats on a job well done- love how it turned out!
Outstanding man!
Hey, it's me again. I have a boat almost exactly like yours, only an '89 model with a 35hp Mercury on it. It's a good boat, and I've done some fixing up on it (replacing seats, etc), but I need to get more serious about the wiring and finding the leak we talked about earlier. Question for you, and I understand if you don't want to answer: about how much did the updates and repairs you made cost? Again, I get it if you don't want to disclose it, but I'm contemplating doing some similar stuff and was just wondering. Thanks!
Really not sure on total cost as i didnt keep track but somewhere in the $1500 range
@@PUTEMDOWNProductions Do you take in boats to update? I'm a few hours away, and definitely interested if you do! Please let me know -- thanks!
Good job man, wow!
The way this boat should have been made
Ryan, I need some help! I'm working on the Pro 17 and need some thought on relocating the seat pedestal, trolling motor compartment and new lid. I'm going to add a tackle storage area in front of the helm like you did and a rod storage box. Could you shoot me the measurements?
I based all my measurements off of tackle box sizes i use and rod length i use
I have a 2013 Tracker 165 and like what you have done to your tracker. I pretty much did the same to mine. I would like to build a cabinet in front of the console but my live well would stop me from putting the piano hinge there. I need come up with away to do that. My question to you is was the plywood you used 3/4" thick? How much vinyl did you order? I pretty need the same since my boat is roughly the same size.
Neil
Vinyl was ordered by the yard and i used 12 yards I believe, plywood was one sheet for front deck, one sheet for floor, and one sheet for compartments i used 5/8 I believe
Awesome thanks looks great!
Any tips for routing new 8 gauge wire for a trolling motor? Everything seems super tight within the two main holes that feed to the back
It will fit through there and then take the panel off by the console and the front deck for easy access
GREAT INFORMATION. FIXING TO RECARPET MY 2009 BASS TRACKER 175 PRO CRAPPIE AND ADD A FEW ACESSORIES.HOW CAN I GET A DIAGRAM FOR WIRING OF THIS BOAT?
Not sure, i would look on forums
I also own a Pro-17 Tracker that I’m planning to update. I’m intrigued by your docking lights (headlights) at the front of your boat. I noticed a 2-pin flush mount connector in your list of add-ons that you used with the docking lights. What was the purpose of the connector? This was a great video that I plan to access as I am doing my work. Thanks!
I use the two pin connectors so i can quickly remove the docking lights
I also noticed you have a quick-connect base as well. Where did you find that component? I questioned Nilight and they indicated they 4:47 didn’t have one.😊
It is a camera tripod quick connect
You have done an excellent job! I have a 96 Tracker! Having trouble with trolling motor power ! Probably something stupid I’m overlooking! Where could I get wiring diagram? Anyway, your boat looks great!
Hi Jerry -- I have an '89 Tracker Pro 17, and I have the wiring diagrams and codes for all of the Tracker boats from that era. Send me an email and I'll reply with the diagrams.
Well done
Phenomenal job! Looks great front to back.
Quick question for your dock/drive lights... where did you get the quick release mounts for the lights... I’ve been wanting to do same mod since before I saw yours, but need a quick release solution.
They are tripod quick release plates used for cameras
Is there any reason you didn't add storage at the front of the boat on either side of storage hatch you added? I have the same boat and I am considering doing that but am curious if there was some obstruction that made you not do it (so I don't run into the same issue). TIA
Rod locker on LH side you could add some shallow storage on the RH side but i didnt need anymore storage for my needs
So been 8 months, how about an update video on what worked well and what you would do differently... Your original videos were excellent!
Will do this spring, just got 8” snow yesterday
Did you get new decals? if so where? Boat look great
I did not get new decals
Good looking amount of pelts in that wall.
looks great!!!
Love the rebuild look great where did you by the Bilige pump and live well system at
Amazon
GREAT video series. Have you noticed any issues with the vinyl being too hot in the summer sun (vs. carpet)?
No issues
Hi there, I'm nearly finished with my bass tracker face lift.. thanks for all your help, I want to put some lights as you did in on your boat,so many choices and prices most lights are plug in type for a house outlet, How did you setup yours. This will be underneath the inside gunwale and about total 35"
Thanks
Happy hunting and fishing
I purchased 12v led strip lights and then modified them to work on the boat. Why i didnt make a video is because it took quite a bit of modification to make everything work with a remote control all on the same circuit.
I've watched most all your videos...they are great. In one of your videos I remember seeing the homemade support for your boat cover. I cannot find this video now. Do you recall which video this would be in?
czcams.com/video/jUY-_VSOKfU/video.html
@@PUTEMDOWNProductions awesome...thanks!!
You da man very sweet, I'm getting ready to re-carpet my 96' pro18 tracker, not sure if I should put new wood down as I'm not at your skill level(first boat) it doesn't look bad no weak spots what would you suggest, and the lights are awesome👌how difficult was it to install? also I read that using glue spray was good for vertical carpet applications? One last question(sorry bud) would water based indoor outdoor glue from home depot work for the wood and aluminum? Again very nice work
Thanks
I would purchase glue from marine store and yes replace all the wood its really not too hard. 3M makes a good spray glue as well. Which lights the docking lights or deck lights? Docking lights were really easy the deck lights were more involved and heavily modified
Thanks for the fast reply, what type of wood should I go with and thickness?, I was referring to the deck lights sounds a little above my knowledge although I have replaced my deck fishfinder, put usb chargers and rebuilt my carbs,fuel pump and water pump.I run a 24v trolling system.
Thanks again
I used AC2 treated plywood 3/4” thickness
@@PUTEMDOWNProductions Thanks for the info, I'm checking out all of your tracker build videos, I'm almost ready to start mine I did notice my fuse box looked well OLD I'd like to replace it I think it's an 8 way water proof fuse block(I think) right? I'm planning on putting deck lighting(yours is awesome) would I need a 12 way fuse block to put those lights on?, thanks for all your help man really appreciate it👍
@@marklopez8378 yes you will want more fused connections once adding accessories, check out the "Blue Sea" fuse blocks, that is what i used and love it
When should i drop my 89 tracker off to you so you can get started on mine
Good morning I have watched your channel and I like it a lot. I just bought a 2002 bass tracker xt 17 40 hp tracker engine. I would like to know if it was hard to install the lights up front and the lights along the sides of the boat?
It wasnt terrible, id remove the front switch panel and front deck to make it easier for ya
I looked at few trackers ever could get people to answers my messages so found my alumaweld guy answered lol what i was realy looking for was a tracker
Youll be happy with it
What was your base price for your tracker before you restored it?
Good morning. I have absorbed most of your content as i have a 1988 pro 17 im rebuilding. Cannot find the specs.
What size fuel tank should it have?
What tank are you running?
And whats the ballpark cost.
Great work and thanks!
Mine has the original 12 gallon tank that is not removable. I think most of the older boats had the 6 gallon portable tanks usually 2 of them, one hooked to engine and one for backup
How did you attached the paddle to the underside of the rear hatch lid?
Came like that from factory but it is just held on by some aluminum brackets
Nice job thinking of doing the same on my boat about how many yards of vinyl did you have to buy and what glue would you recommend been searching thru you post for as much info as possible trying to do a cost sheet thanks for your time
I used roughly 12 yards, not sure on glue but i wouldnt use what i did... it has held up ok but took forever to dry!